Urine Test Strip Quantitative Assay with a Smartphone Camera

Miroslav Pohanka,Jitka Zakova
DOI: https://doi.org/10.1155/2024/6004970
2024-03-19
International Journal of Analytical Chemistry
Abstract:Urine test strips for urinalysis are a common diagnostic tool with minimal costs and are used in various situations including homecare and hospitalization. The coloration scaled by the naked eye is simple, but it is suitable for semiquantitative analysis only. In this paper, a colorimetric assay is developed based on a smartphone digital camera and urine test strips. Assays of pH, albumin, glucose, and lipase activity were performed as a tool for the diagnosis of aciduria, alkaluria, glycosuria, proteinuria, and leukocyturia. The RGB color channels were analyzed in the colorimetric assay, and the assay exerted good sensitivity, and all the particular diagnoses proved to be reliable. The limits of detection for glucose (0.11 mmol/L), albumin (0.15 g/L), and lipase (2.50 U/μL) were low enough to cover the expected physiological concentration, and the range for pH was also satisfactory. The urine test strips with a camera as an output detector proved applicability to spiked urine samples, and the results were also well in comparison to the standard assays which confirms the practical relevance of the presented findings.
chemistry, analytical
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to improve the accuracy and repeatability of quantitative analysis of urine test strips. Specifically, although traditional urine test strips are low - cost and easy to use, their color changes usually depend on visual observation, and only semi - quantitative analysis can be carried out, with large subjective errors and limitations. To overcome these limitations, this paper proposes a colorimetric method based on smartphone cameras for improving the quantitative analysis of urine test strips. ### Main problems and solutions 1. **Limitations of traditional methods**: - The color change of urine test strips depends on visual observation, and it is difficult to achieve accurate quantitative analysis. - The results are greatly affected by individual differences (such as color vision sensitivity), resulting in poor repeatability of the results. 2. **Proposed solutions**: - Use smartphone cameras to capture the color changes of urine test strips and analyze the data of RGB color channels through image processing techniques. - Determine the concentrations of different biochemical indicators (such as pH, albumin, glucose, and lipase activity) through calibration curves, so as to achieve more accurate quantitative analysis. ### Specific objectives - **Improve accuracy**: Through smartphone cameras and image processing techniques, reduce the influence of human factors on the results, and improve the accuracy and consistency of measurement. - **Expand the scope of application**: Make urine test strips not limited to semi - quantitative analysis, but be able to provide reliable quantitative data, which is suitable for more clinical diagnosis scenarios. - **Simplify the operation process**: On the premise of maintaining low - cost and ease - of - use, use common smartphone devices for analysis without the need for complex laboratory instruments. ### Experimental verification The paper carried out detailed experiments on pH, albumin, glucose, and lipase activity, and compared and verified them with standard laboratory methods. The results showed that there was no significant difference between the two, proving the effectiveness and reliability of this method. ### Conclusion By combining smartphone cameras and urine test strips, the method proposed in this paper not only improves the accuracy and repeatability of urine analysis, but also retains the advantages of low cost and simple operation of traditional methods, providing a new and effective tool for point - of - care (POC) testing.