Thermoplastic polyurethane composites based on aluminum hypophosphite/modified iron tailings system with outstanding fire performance

Mengru Liu,Xinliang Liu,Po Sun,Gang Tang,Yadong Yang,Yongchun Kan,Mingfu Ye,Zhifang Zong
DOI: https://doi.org/10.1002/app.52486
IF: 3
2022-04-30
Journal of Applied Polymer Science
Abstract:In order to overcome the combustibility problem of thermoplastic polyurethane (TPU), solid waste modified iron tailings (MIT) and aluminum hypophosphite (AHP) were added to TPU, and cone calorimeter revealed that MIT and AHP have significant suppressive effects on smoke and heat release, which can reduce the thermal hazards from combustion.Iron tailings (IT) is the remaining industrial solid waste after beneficiation. The accumulation of billion tons of tailings not only occupies valuable land resources but also causes serious environmental pollution and human harm. This work aims to explore the potential application of IT in flame retardant field. The modified iron tailings (MIT) were combined with aluminum hypophosphite (AHP) to prepare a series of TPU/AHP/MIT composites by melt blending method. Thermogravimetric (TGA) test indicated that MIT and AHP significantly improved the thermal stability of the composites. The char residue of TPU/AHP22.5/MIT2.5 was enhanced to 29.60 wt% compared with 27.51 wt% of TPU/AHP25. Cone calorimetry test (CCT) confirmed that PHRR and THR of TPU/AHP15/MIT10 were decreased by 88.4% and 55.2% compared with those of pure TPU. Adding 2.5 wt% MIT could reduce the gas production of the TPU/AHP system by 32.82%. Scanning electron microscopy (SEM) and Raman spectroscopy tests confirmed that AHP/MIT system could increase the thickness and graphitization degree of char residue for the TPU composites, and thus increase the thermal stability and fire resistance of the composites. Lastly, the possible fire retarding mechanism of TPU/AHP/MIT composites was illustrated. This work provided a novel strategy for utilization of IT.
polymer science
What problem does this paper attempt to address?