A Low-Profile Vertically Polarized Magneto-Electric Monopole Antenna With a 60% Bandwidth for Millimeter-Wave Applications

Jingxue Wang,Yujian Li,Junhong Wang,Lei Ge,Meie Chen,Zhan Zhang,Zheng Li
DOI: https://doi.org/10.1109/tap.2020.3030907
IF: 5.7
2021-01-01
IEEE Transactions on Antennas and Propagation
Abstract:A millimeter-wave (mmW) low-profile wideband magneto-electric (ME) monopole antenna with the vertically polarized endfire radiation is presented by combining a pair of the top-loaded electric monopoles with a thin open-ended substrate integrated waveguide (SIW) with the extended lower broad wall. The antenna has a profile of 0.19 wavelength at the center frequency of the operating band, a wide bandwidth of 60.7% (from 23.5 to 44 GHz) covering all the fifth-generation (5G) mmW bands in the Ka-band, a stable gain of around 7 dBi, and a tilted radiation pattern. Then a $1 times 8$ ME-monopole array is designed to investigate the beam scanning properties and the effects of the metallic ground and the polycarbonate radome, which should be considered in practical applications. As a sample, a $1 times 8$ array fed by an SIW feed network, assembled on a metallic ground plane, and covered by a polycarbonate radome is finally designed, fabricated, and measured. The prototype achieves promising radiation features with a gain up to 15.3 dBi. Owing to the compact low-profile structure with good performance, the proposed design would be valuable to the mmW applications.
telecommunications,engineering, electrical & electronic
What problem does this paper attempt to address?
This paper aims to solve the design problem of low - profile broadband antennas in the millimeter - wave band, especially for the vertically polarized end - fire antennas in the fifth - generation (5G) mobile communication systems. Specifically, the objectives of the paper include: 1. **Achieving low - profile design**: The paper proposes a new magneto - electric (ME) monopole antenna design. By using the image theory and the top - loading method, the antenna height is significantly reduced from 0.51 wavelengths to 0.19 wavelengths. This makes the antenna more compact and suitable for portable devices. 2. **Broadband coverage**: The antenna designed in the paper has a bandwidth of 60.7% (from 23.5 GHz to 44 GHz) and can cover all 5G millimeter - wave bands (Ka - band), which is very important for multi - band applications. 3. **Stable gain and radiation pattern**: The antenna maintains a stable gain of about 7 dBi throughout the working frequency band and has a tilted end - fire radiation pattern, which helps to improve the directivity of the antenna and reduce the backward radiation. 4. **Array performance study**: The paper also designs a 1×8 ME monopole antenna array and studies its beam - scanning characteristics and the influence of the metal ground and the polycarbonate radome on the antenna performance. The experimental results show that the array prototype exhibits good radiation characteristics at a gain of 15.3 dBi. In conclusion, through innovative antenna design methods, this paper solves the design problem of low - profile broadband antennas in the millimeter - wave band and provides a valuable reference for the practical application of 5G mobile communication systems.