Direct numerical simulation of turbulent heat transfer in concentric annular pipe flows

Edris Bagheri,Bing-Chen Wang
DOI: https://doi.org/10.1063/5.0047531
IF: 4.6
2021-05-01
Physics of Fluids
Abstract:The effect of radius ratio on turbulent convective heat transfer within a concentric annular pipe has been studied using direct numerical simulation. Four radius ratios (<span class="equationTd inline-formula"><math> R i / R o</math></span> = 0.1–0.7) have been compared at a fixed Reynolds number, where <i>R<sub>i</sub></i> and <i>R<sub>o</sub></i> denote the radii of the inner and outer pipes, respectively. The statistical moments of the temperature field, budget balances of the temperature variance and turbulent heat fluxes, and turbulence structures that dominate the heat transfer process have been thoroughly studied in both physical and spectral spaces. It is observed that the radius ratio has a significant impact on the Nusselt numbers and skin friction coefficients of the inner and outer cylinder walls, and on the interaction of thermal boundary layers developed over these two curved walls. Owing to the curvature difference between the two cylinder surfaces, the thermal boundary layer developed over the outer cylinder wall is thicker than that over the inner cylinder wall. Also, turbulent heat transfer is more intense on the outer cylinder side than on the inner cylinder side. As the radius ratio decreases, the difference in turbulence statistics between the inner and outer cylinder sides becomes increasingly pronounced. It is also observed that both axial and azimuthal characteristic length scales of the most energetic turbulent thermal structures are larger on the inner cylinder side than on the outer cylinder side.
mechanics,physics, fluids & plasmas
What problem does this paper attempt to address?
This paper aims to study the influence of turbulent convective heat transfer in concentric annular ducts under different radius ratios. Specifically, the author compares the heat transfer characteristics of four different radius ratios (\(R_i/R_o = 0.1, 0.3, 0.5, 0.7\)) at a fixed Reynolds number (Reynolds number, \(Re_{D_h} = 17700\)) through the Direct Numerical Simulation (DNS) method. The research focuses on the following aspects: 1. **Statistical moments of the temperature field**: Analyze the first - and second - order statistical moments of the temperature field to understand the influence of different radius ratios on the temperature distribution. 2. **Budget balance of temperature variance and turbulent heat flux**: Study the budget balance of temperature variance and turbulent heat flux to reveal the energy conversion mechanism in the heat transfer process. 3. **Interaction of thermal boundary layers**: Explore the interaction of thermal boundary layers on the inner and outer cylindrical walls and the influence of these boundary layers on the heat transfer process. 4. **Spectral characteristics of the temperature field**: Through spectral analysis, study the characteristic length scale of temperature fluctuations to understand the characteristics of thermal structures under different radius ratios. 5. **Characteristic length scale of thermal structures**: Analyze the characteristic length scale of the most active thermal structures in the axial and circumferential directions to further understand the turbulent behavior in the heat transfer process. ### Main findings 1. **Nusselt number and skin friction coefficient**: - The Nusselt number (\(Nu_i\)) on the inner cylindrical wall is higher than the Nusselt number (\(Nu_o\)) on the outer cylindrical wall. - As the radius ratio decreases, the difference in Nusselt number between the inner and outer cylindrical walls increases significantly. - This difference is mainly attributed to the different curvatures of the inner and outer cylindrical walls, especially when the radius ratio is \(R_i/R_o = 0.1\), this difference is most obvious. 2. **Statistical characteristics of the temperature field**: - The thermal boundary layer on the outer cylindrical wall is thicker than that on the inner cylindrical wall. - Turbulent convective heat transfer is more intense on the outer cylindrical wall. 3. **Characteristic length scale of thermal structures**: - The characteristic length scale of the most active thermal structures in the axial and circumferential directions is larger on the inner cylindrical wall than on the outer cylindrical wall. - As the radius ratio decreases, the difference in turbulent statistical characteristics between the inner and outer cylindrical walls becomes more significant. ### Conclusion This study systematically analyzes the characteristics of turbulent convective heat transfer in concentric annular ducts under different radius ratios through detailed direct numerical simulations. The research results show that the radius ratio has a significant impact on the heat transfer process, especially in terms of the interaction between the Nusselt number and the thermal boundary layer. These findings are helpful for better understanding and optimizing heat transfer designs in engineering applications, such as heat exchangers, jet engine diffusers and oil well drilling.