Abstract:A multifunctional boron‐doping graphene/lithium carbonate (BG/LCO) nanointerfacial interphase is designed on the surface of commercial LiFePO4 particles using a CO2 reduction method. This innovation first leverages the self‐catalytic properties of the BG/LCO layer to create a robust inorganic LiF‐rich CEI while simultaneously enhancing electron and Li+ conductivity and strengthening FeO bonding. Lithium iron phosphate (LFP) cathode is renowned for high thermal stability and safety, making them a popular choice for lithium‐ion batteries. Nevertheless, on one hand, the fast charge/discharge capability is fundamentally constrained by low electrical conductivity and anisotropic nature of sluggish lithium ion (Li+) diffusion. On the other hand, the interface and internal structural degradation occurs when subjected to high‐rate condition. Herein, a multifunctional boron‐doping graphene/lithium carbonate (BG/LCO) nanointerfacial layer on surface of commercial LiFePO4 particles is designed, in which the BG layer catalyzes the rapid reaction of Li2CO3‐LiPF6 for homogeneous and mechanically robust inorganic LiF‐rich structure across the cathode‐electrolyte interphase (CEI), forms a conductive network to significantly enhance both electron and Li+ transport, and strengthens the FeO bonding to minimize both Fe loss and the formation of Fe‐Li antisite defects. Correspondingly, the modified LFP cathode achieves a high capability of 113.2 mAh g−1 at 10 C and extraordinary cyclic stability with 88.0% capacity retention over 1000 cycles as compared to the pristine LFP cathode with a capacity of only 94.0 mAh g−1 and 64.6% capacity retention. It also exhibits great enhancements of 20.1% and 3.7% at higher‐rate condition (room temperature/15 C) and the low temperature condition (−10 °C/1 C), respectively.

Nano-fusiform Li2FeSiO4 with highly exposed (001) facets for Lithium-Ion Batteries

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Single-Crystal Α-Fe2o3 with Engineered Exposed (001) Facet for High-Rate, Long-Cycle-Life Lithium-Ion Battery Anode.

Nanostructured 0.8Li 2FeSiO 4/0.4Li 2SiO 3/C composite cathode material with enhanced electrochemical performance for lithium-ion batteries

Nanosized FeF3·0.33H2O As Cathode Material for High-Performance Li-Ion Batteries

Enhancing lithium-ion and electric conductive Li2FeSiO4 cathode through in situ boron-doping and carbon-coating strategy

Nanosized FeF30.33H<sub>2</sub>O as Cathode Material for High-Performance Li-Ion Batteries

Designing In-Situ-Formed Interphases Enables Highly Reversible Cobalt-Free LiNiO2 Cathode for Li-ion and Li-metal Batteries

Highly [010]-Oriented Self-Assembled LiCoPO4/C Nanoflakes As High-Performance Cathode for Lithium Ion Batteries

Catalytic Strategies Enabled Rapid Formation of Homogeneous and Mechanically Robust Inorganic‐Rich Cathode Electrolyte Interface for High‐Rate and High‐Stability Lithium‐Ion Batteries

Fabrication and Characterization of Carbon-Coated Li2FeSiO4 Nanoparticles Reinforced by Carbon Nanotubes As High Performance Cathode Materials for Lithium-Ion Batteries

Nanoporous LiMn2O4 nanosheets with exposed {111} facets as cathodes for highly reversible lithium-ion batteries

A nanorod-like Ni-rich layered cathode with enhanced Li<SUP>+</SUP> diffusion pathways for high-performance lithium-ion batteries

Rigid TiO2- x coated mesoporous hollow Si nanospheres with high structure stability for lithium-ion battery anodes

Enhanced Lithium Storage Capability of FeF3·0.33H2O Single Crystal with Active Insertion Site Exposed

Single-Crystalline LiFePO4 Nanosheets for High-Rate Li-Ion Batteries

Nano-scale hollow structure carbon-coated LiFePO4 as cathode material for lithium ion battery

Amorphous SiO 2 Nanoparticles Encapsulating a SiO Anode with Strong Structure for High-Rate Lithium-Ion Batteries

Design of surface protective layer of LiF/FeF3 nanoparticles in Li-rich cathode for high-capacity Li-ion batteries

Hydrothermal Synthesis and Electrochemical Performance of Nanoparticle Li2FeSiO4/C Cathode Materials for Lithium Ion Batteries