Abstract:In order to research the force state of the piers subjected to a ship collision under the protection of floating anti-collision facilities, this study uses nonlinear spring connections to simulate the impact of ship damping and incidental water quality in the collision area. BIM technology is used to realize a safety evaluation method for the anti-collision floating box protection when the ship is colliding with piers. Established a BIM-based parametric preprocessing model for ships, piers, and anti-collision facilities, and opened the interface with ABAQUS longitudinally. After realizing the parameter adjustment of the BIM model, the visual parameter adjustment can be realized without destroying the boundary conditions, load conditions, and meshing. Taking a rigid frame bridge as an example, the most disadvantage position of the bridge pier under ship collision is determined by the parameterization method. At the same time, multi-condition analysis was carried out on the ship impacting the pier anti-collision floating box at different angles, different tonnages, and different speeds. Finally, the analysis results are traced back to the BIM model, achieving the unified integration of BIM model information and finite element analysis results and the purpose of visual analysis of any working conditions. The results show that the use of BIM parameterization technology to achieve linkage with the finite element preprocessing model can improve the efficiency of multi-condition sensitivity analysis and achieve the purpose of visual dynamic adjustment. The safety assessment analysis of the pier under the protection of the anti-collision pontoon on the pier under various working conditions shows that the anti-collision pontoon effectively reduces the hazard of the ship colliding with the pier, and the impact force gradually increases with the change from the oblique collision to the frontal collision. The peak impact force increases with the weight of the ship and shows a nonlinear relationship, such that the peak value of impact force increases with the speed increase, and the speed and the peak values of impact force show basically a linear relationship.

Planning Study of Fender Spacing at Semayang Port based on PIANC

ANALYSIS OF MAN-HOUR REQUIREMENTS AND SCHEDULING FOR FLOATING DOCK REPAIRS

ANALYSIS OF THE UTILIZATION OF THE HARBOR AREA AT THE PORT OF TANJUNG PERAK

Bending energy absorption performance of composite fender piles with different winding angles

Refinement Method of Retaining Wall (L-Shape Concrete) and CCSP Design in Kalimas Quayside Kademeter 1200-1400 Project

Safety Assessment of Ship Collision with Piers under the Protection of Anti-Collision Floating Box Based on BIM Technology

The Economic and Safety Improvement Feasibility of Urban Ocean Fishing Port Modernization – Study Case of Nizam Zachman

The study of design and optimisation for CFRP combined pier anti-collision device

STUDI PERANCANGAN KAPAL FERRY RO-RO MODEL KATAMARAN DI PERAIRAN DANAU TOBA

Development of a Feeder Port of Tanjung Ringgit Facilities to Support Implementation of Sea Tollway

Ship collision mitigation for offshore wind turbine monopile foundations via high-general/low-collision-stiffness steel fenders

Method for Determining Anchorage Area inside Coastal Container Ports

Analysis of delays in the container loading and unloading process at the stevedoring stage at PT Pelabuhan Indonesia (Persero) Regional 2 Pangkal Balam

Semi‐quantitative risk assessment on the impact of port development to wellhead platform

Comparative Study of Direct Analysis Method and Effective Length Method on Structural Steel Piperack Using STAAD Pro V8i Software

STRUCTURAL DESIGN AND CONSTRUCTION OF INNOVATIVE FIBER REINFORCED POLYMER FENDER FOR INLAND WATERWAY BRIDGES

A Study on the Calculation Method of Wave Crest Height and Panel Wave Force of a New Barrel-Pile Foundation Composite Structure Wharf

Decreasing Demurrage Time by Increasing Port Service Level and Utilities Considering Crane Formation Using Discrete Simulation

The Concepts of Planning in Architecture and Environtment to Mitigate Tsunami Disaster Case Study: Semawang Beach, Denpasar, Bali

Seismic Performance Evaluation of Wharf Based on ASCE 61-14

Vibration-based damage identification for ship sandwich plate using finite element method