Porosity modeling in a TiNbTaZrMo high-entropy alloy for biomedical applications

Saro San,Puja Adhikari,Ridwan Sakidja,Jamieson Brechtl,Peter K. Liaw,Wai-Yim Ching

DOI: https://doi.org/10.1039/d3ra07313k

IF: 4.036

2023-01-01

RSC Advances

Abstract:High-entropy alloys (HEAs) have attracted great attention for many biomedical applications.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Bio-Corrosion Behaviors and Bio-Compatibilities of Tinbzrta and Tinbzrtamo High Entropy Alloys

Jun Cheng,Panyi Yang,Qiuming Chen,Xiao Long,Guang Chen,Jinming Xu,Wanyuan Gui,Tao Wu,Jian Hu

DOI: https://doi.org/10.1016/j.jmrt.2024.08.083

IF: 6.267

2024-01-01

Journal of Materials Research and Technology

Abstract:The bio-corrosion behavior and bio-compatibility of TiNbZrTa and TiNbZrTaMo high entropy alloys (HEAs) are crucial for their efficient maintenance during biological implantation. In this work, TiNbZrTa and TiNbZrTaMo HEAs were successfully prepared via vacuum melting, with a beta-type titanium alloy Ti35Nb7Zr5Ta, exhibiting good biocompatibility used as a comparison. Due to the high entropy effect of equal atomic ratios, both TiNbZrTa and TiNbZrTaMo HEAs exhibit body-centered cubic (BCC) structure and lattice distortion compared to the beta titanium alloy Ti35Nb7Zr5Ta. Mo elements contribute to the formation of a new BCC phase, resulting in a white matrix rich in Ta and Mo, and a dark second phase rich in Ti, Zr, and Nb. Electrochemical test results at 37 degrees C shown that TiNbZrTa has a wider and more stable passivation area than TiNbZrTaMo. The XPS results shown that formation of the passive film is related to the main elements added. Ti, Nb, Ta and Mo formed oxides via the solid-liquid interface and migrate inward, while Zr is formed at the passivation film/metal substrate interface and migrates outward, finally forming the layered structure of the passivation film. Additionally, the cytotoxicity test of mouse fiber cells was carried out to evaluate the biocompatibility of the HEAs. The results shown that the cell proliferation rate of TiNbZrTa and TiNbZrTaMo HEAs reached 0 and 1, respectively, with TiNbZrTa exhibiting better biocompatibility, as adding Mo reduced the cell proliferation rate. These findings may provide a method for predicting the bio-corrosion behavior and bio-compatibility of HEAs used for biological implantation.
Design and properties of novel Ti–Zr–Hf–Nb–Ta high-entropy alloys for biomedical applications

Wei Yang,Shujie Pang,Ying Liu,Qing Wang,Peter K. Liaw,Tao Zhang

DOI: https://doi.org/10.1016/j.intermet.2021.107421

IF: 4.075

2022-02-01

Intermetallics

Abstract:The novel high-entropy alloys (HEAs) with compositions of (Ti1/3Zr1/3Hf1/3)15(Nb1/2Ta1/2) x (x = 3, 5) for biomedical applications have been designed and synthesized, using the cluster formula approach. The present HEAs have a single body-centered-cubic (BCC) solid-solution structure and possess prominent mechanical properties of high compressive yield strength (834–890 MPa) and microhardness (287–293 Hv), large plasticity (>45%) under compression, as well as low Young's moduli (56–68 GPa). Also, these HEAs exhibit good bio-corrosion resistance, as revealed by a low corrosion rate at the order of 10− 4 mm/year and the low passive current densities of 10− 2 – 10− 1 A/m2, which are attributed to the formation of passive films consisting of Ti-, Zr-, Hf-, Nb-, and Ta- oxides. The high cell viability and proliferation of bone-forming MC3T3-E1 cells on the HEAs are comparable to those on the Ti–6Al–4V alloy, indicating their good biocompatibility. The present work demonstrates the great potential of these novel Ti–Zr–Hf–Nb–Ta HEAs for biomedical applications.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Mechanical, corrosion, and wear properties of biomedical Ti–Zr–Nb–Ta–Mo high entropy alloys

Nengbin Hua,Wenjie Wang,Qianting Wang,Youxiong Ye,Sihan Lin,Lei Zhang,Qiaohang Guo,Jamieson Brechtl,Peter K. Liaw

DOI: https://doi.org/10.1016/j.jallcom.2020.157997

IF: 6.2

2021-04-01

Journal of Alloys and Compounds

Abstract:The microstructures, mechanical, corrosion, and wear behaviors of the TixZrNbTaMo (x = 0.5, 1, 1.5, and 2, molar ratio) high entropy alloys (HEAs) were studied. It was found that the Ti–Zr–Nb–Ta–Mo HEAs showed a dendrite structure with two body-centered-cubic (BCC) solid solution phases. The Ti0.5ZrNbTaMo HEA exhibited a high hardness of about 500 HV, high compressive strength approaching 2,600 MPa, and large plastic strain of over 30%. Furthermore, the highly-protective oxide films formed on the surface of Ti–Zr–Nb–Ta–Mo HEAs in the phosphate buffer saline (PBS) solution, which resulted in the high corrosion resistance of the HEAs. The Ti–Zr–Nb–Ta–Mo HEAs exhibited the greater dry- and wet-wear resistance than that of the traditional biomedical Ti6Al4V alloy. The results also indicated that with the decrease in the Ti content, the wear resistance of the Ti–Zr–Nb–Ta–Mo HEAs in the PBS solution improved. Finally, the Ti0.5ZrNbTaMo alloy presented the highest corrosive wear resistance among the four HEAs owing to its combination of good mechanical properties and high chemical stability.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Hongwei Yan,Yong’an Zhang,Wei Xiao,Boyu Xue,Rui Liu,Xiwu Li,Zhihui Li,Baiqing Xiong

DOI: https://doi.org/10.1007/s40195-024-01716-x

2024-01-01

Acta Metallurgica Sinica (English Letters)

Abstract:This study investigated the microstructure and mechanical properties of AlNbTiVZr series high-entropy alloys (HEAs) through both experimental studies and density functional theory calculations. Significant improvements in the microstructures and mechanical properties were achieved for the AlNbTiVZr series HEAs by meticulously adjusting the alloy composition and employing homogenization heat treatment. Notably, the specimen designated as Al0.5NbTiVZr0.5 demonstrated excellent mechanical properties including a compressive yield strength of 1162 MPa and a compressive strength of 1783 MPa. After homogenization heat treatment at 1000 °C for 24 h, the Al0.5NbTiVZr0.5 alloy exhibits brittle-to-ductile transition. Further atomic-scale theoretical simulations reveal that the decrease of Al content intrinsically enhances the ductility of the alloys, thereby indicating that the mechanical properties of the AlNbTiVZr series HEAs were significantly influenced by the chemical composition. Additionally, specific atomic pair formations were observed to adversely affect the microstructure of the AlNbTiVZr series HEAs, particularly in terms of ductility. These findings provide valuable insights for the design and optimization of light weight HEAs, emphasizing the synergistic adjustment of alloy composition and heat treatment processes to achieve a balance between the strength and ductility.
Preparation of TiNbTaZrMo high-entropy alloy with tunable Young's modulus by selective laser melting

Junyi Feng,Daixiu Wei,Peilei Zhang,Zhishui Yu,Changxi Liu,Weijie Lu,Kuaishe Wang,Hua Yan,Laichang Zhang,Liqiang Wang

DOI: https://doi.org/10.1016/j.jmapro.2022.11.046

IF: 5.684

2022-11-27

Journal of Manufacturing Processes

Abstract:Biological high-entropy alloy (Bio-HEA) is a new generation of biomedical alloys with excellent mechanical properties and good biocompatibility. However, elemental segregation often exists during conventional casting or arc melting, which dramatically degrades their mechanical performance. Here, we utilized the selective laser melting (SLM) technique to fabricate dense blocks with low Young's modulus and good compression property at room temperature. Then, we fabricated HEA with triply periodic minimal surface (TPMS) lattice, which has Young's modulus (6.71–16.21 GPa) very close to that of human trabecular bone. This structure provides the possibility of meeting the requirement of various bone implants by customizing the shape and porosity of the TPMS lattice, affirming the possibility of Bio-HEA for biomedical applications.

engineering, manufacturing
Microstructural, Mechanical, and Electrochemical Characterization of CrMoNbTiZr High-Entropy Alloy for Biomedical Application

Akeem Akinwekomi,Farid Akhtar

DOI: https://doi.org/10.3390/ma16155320

2023-07-28

Abstract:High-entropy alloys (HEA) with superior biocompatibility, high pitting resistance, minimal debris accumulation, and reduced release of metallic ions into surrounding tissues are potential replacements for traditional metallic bio-implants. A novel equiatomic HEA based on biocompatible metals, CrMoNbTiZr, was consolidated by spark plasma sintering (SPS). The relative sintered density of the alloy was about 97% of the theoretical density, indicating the suitability of the SPS technique to produce relatively dense material. The microstructure of the sintered HEA consisted of a BCC matrix and Laves phase, corresponding to the prediction of the thermodynamic CALPHAD simulation. The HEA exhibited a global Vickers microhardness of 531.5 ± 99.7 HV, while the individual BCC and Laves phases had hardness values of 364.6 ± 99.4 and 641.8 ± 63.0 HV, respectively. Its ultimate compressive and compressive yield strengths were 1235.7 ± 42.8 MPa and 1110.8 ± 78.6 MPa, respectively. The elasticity modulus of 34.9 ± 2.9 GPa of the HEA alloy was well within the range of cortical bone and significantly lower than the values reported for commonly used biomaterials made from Ti-based and Cr-Co-based alloys. In addition, the alloy exhibited good resistance to bio-corrosion in PBS and Hanks solutions. The CrMoNbTiZr HEA exhibited an average COF of 0.43 ± 0.06, characterized mainly by abrasive and adhesive wear mechanisms. The CrMoNbTiZr alloy's mechanical, bio-corrosion, and wear resistance properties developed in this study showed a good propensity for application as a biomaterial.
An efficient approach to develop and screen out high-entropy alloy composition with high performance for biomedical application

Xuan Xiao,Manzhen Lin,Chenhao Xu,Jiawei Zhang,Wei-Bing Liao

DOI: https://doi.org/10.1016/j.surfcoat.2024.130504

IF: 4.865

2024-02-08

Surface and Coatings Technology

Abstract:High-entropy alloys (HEAs) have great prospects for applications as biomedical materials due to their excellent properties of high strength and corrosion resistance. In this study, a co-deposition technology with two targets was used to prepare 16 independent Ti-Zr-Nb-Ta HEA samples with composition gradient distribution. Afterwards, these samples' chemical compositions, structures, and properties were systematically studied, and it was found that there was a non-linear relationship between the compositions, structures, and properties. The chemical composition of Ti 12.50 Zr 11.56 Nb 12.71 Ta 46.62 O 16.61 HEA sample with superior comprehensive properties was efficiently screened out, and its nanohardness, open circuit potential (OCP) value, and corrosion current density were identified to be 12.91 GPa, −0.37 V SCE , and 3.91 × 10 −9 A·cm −2 , respectively. This parallel co-deposition method offered a new efficient approach to develop advanced biomedical HEAs.

physics, applied,materials science, coatings & films
Development of TiNbTaZrMo bio-high entropy alloy (BioHEA) super-solid solution by selective laser melting, and its improved mechanical property and biocompatibility

Takuya Ishimoto,Ryosuke Ozasa,Kana Nakano,Markus Weinmann,Christoph Schnitter,Melanie Stenzel,Aira Matsugaki,Takeshi Nagase,Tadaaki Matsuzaka,Mitsuharu Todai,Hyoung Seop Kim,Takayoshi Nakano

DOI: https://doi.org/10.1016/j.scriptamat.2020.113658

IF: 6.302

2021-03-01

Scripta Materialia

Abstract:BioHEAs, specifically designed high entropy alloy (HEA) systems for biomedical applications, represent a new era for biometals. However, recent challenges are (1) the poor shape customizability, and (2) the inevitable severe segregation due to the intrinsic fact that HEA is an ultra-multicomponent alloy system. To achieve shape customization and suppression of elemental segregation simultaneously, we used an extremely high cooling rate (~107 K/s) of the selective laser melting (SLM) process. We, for the first time, developed pre-alloyed Ti1.4Nb0.6Ta0.6Zr1.4Mo0.6 BioHEA powders and SLM-built parts with low porosity, customizable shape, excellent yield stress, and good biocompatibility. The SLM-built specimens showed drastically suppressed elemental segregation compared to the cast counterpart, representing realization of a super-solid solution. As a result, the 0.2% proof stress reached 1690 ± 78 MPa, which is significantly higher than that of cast Ti1.4Nb0.6Ta0.6Zr1.4Mo0.6 (1140 MPa). The SLM-built Ti1.4Nb0.6Ta0.6Zr1.4Mo0.6 BioHEA is promising as a next-generation metallic material for biomedical applications.

materials science, multidisciplinary,nanoscience & nanotechnology,metallurgy & metallurgical engineering
GPa-level pressure-induced enhanced corrosion resistance in TiZrTaNbSn biomedical high-entropy alloy

Xiao-hong Wang,Yu-lei Deng,Qiao-yu Li,Zhi-Xin Xu,Teng-fei Ma,Xing Yang,Duo Dong,Dong-dong Zhu,Xiao-hong Yang

DOI: https://doi.org/10.1007/s41230-024-3068-z

2024-04-12

China Foundry

Abstract:TiZrTaNb-based high-entropy alloys (HEAs) are research frontier of biomedical materials due to their high hardness, good yield strength, excellent wear resistance and corrosion resistance. Sn, as an essential trace element in the human body that plays a significant role in physiological process. It has stable chemical properties and a low elastic modulus. In this study, a new material, TiZrTaNbSn HEAs, was proposed as a potential biomedical alloy. The Ti 35 Zr 25 Ta 15 Nb 15 Sn 10 biomedical high-entropy alloys (BHEAs) were successfully prepared through an arc melting furnace and then remelted using a German high-temperature and high-pressure apparatus under GPa-level (4 GPa and 7 GPa). The precipitation behavior of the needle-like HCP-Zr 5 Sn 3 phase that precipitates discontinuously at the grain boundary was successfully controlled. The phase constitution, microstructure, and corrosion resistance of the alloy were studied. The results show that the needle-like HCP-Zr 5 Sn 3 phase is eliminated and the (Zr, Sn)-rich nanoprecipitated phase is precipitated in the microstructure under high pressure, which leads to the narrowing of grain boundaries and consequently improves the corrosion resistance of the alloy. In addition, the formation mechanisms of (Zr, Sn)-rich nanoprecipitates in BHEAs were discussed. More Zr and Sn dissolve in the matrix due to the effect of high pressure, during the cooling process, they precipitate to form a (Zr, Sn)-rich nano-precipitated phase.

metallurgy & metallurgical engineering
New TiTaNbZrMo high-entropy alloys for metallic biomaterials

Chenwei Li,Ying Ma,Xu Yang,Minghao Hou

DOI: https://doi.org/10.1088/2053-1591/ac2f0b

IF: 2.025

2021-10-01

Materials Research Express

Abstract:Abstract The advantages of high entropy alloy with good comprehensive properties provide a potential opportunity to explore and develop new alloys suitable for human implantation. In this experiment, TiTaNbZrMo high entropy alloy was designed and prepared by alloy design and first principle. The calculation results predict that the phase composition of each high entropy alloy is BCC structure, and the designed high entropy alloy has structural stability; the non-equal atomic ratio TiNbTaZrMo high-entropy alloy has higher ductility than the equal atomic ratio TiNbTaZrMo high-entropy alloy; the B/G, Poisson’s ratio υ and ( C 12 - C 44 ) values of Ti 30 (NbTaZr) 60 Mo 10 alloy are the largest, indicating that the toughness of this alloy is the best, and the Young’s modulus value is the smallest. The experimental results show that the yield strength of Ti 30 (NbTaZr) 60 Mo 10 alloy is 1132 MPa, the plastic strain is 33%, and the wear resistance and corrosion resistance are good. The potential of Ti 30 (NbTaZr) 60 Mo 10 in biological field is proved by calculation and experimental test, which provides an important basis for its industrial application in biomedical alloy.

materials science, multidisciplinary
Alloy Design and Properties Optimization of High-Entropy Alloys

Y. Zhang,X. Yang,P. K. Liaw

DOI: https://doi.org/10.1007/s11837-012-0366-5

2012-07-01

JOM

Abstract:This article reviews the recent work on the high-entropy alloys (HEAs) in our group and others. HEAs usually contain five or more elements, and thus, the phase diagram of HEAs is often not available to be used to design the alloys. We have proposed that the parameters of δ and Ω can be used to predict the phase formation of HEAs, namely Ω ≥ 1.1 and δ ≤ 6.6%, which are required to form solid-solution phases. To test this criterion, alloys of TiZrNbMoVx and CoCrFeNiAlNbx were prepared. Their microstructures mainly consist of simple body-centered cubic solid solutions at low Nb contents. TiZrNbMoVx alloys possess excellent mechanical properties. Bridgman solidification was also used to control the microstructure of the CoCrFeNiAl alloy, and its plasticity was improved to be about 30%. To our surprise, the CoCrFeNiAl HEAs exhibit no apparent ductile-to-brittle transition even when the temperatures are lowered from 298 K to 77 K.

materials science, multidisciplinary,metallurgy & metallurgical engineering,mining & mineral processing,mineralogy
Mechanical properties and biocompatibility evaluation of TiZrNbTaFe high entropy alloy films deposited using a hybrid HiPIMS and RF sputtering system

Pei-Shan Wu,Hsin Chao,Shih-Jie Lin,Yung-Chin Yang,Chun-Wei Hou,Jyh-Wei Lee,Bih-Show Lou

DOI: https://doi.org/10.1016/j.surfcoat.2024.131539

IF: 4.865

2024-11-10

Surface and Coatings Technology

Abstract:Given the well-documented low biocompatibility issues associated with conventional metallic biomaterials, there is an urgent need to develop new biomaterials. Biological high entropy alloys (HEAs), designed with non-toxic elements for biomedical applications, represent a significant advancement in metal biomedical materials due to their tunable mechanical properties and excellent biological safety. This study employed a hybrid system that combined a high power impulse magnetron sputtering (HiPIMS) power with a radio frequency (RF) power to synthesize a series of amorphous TiZrNbTaFe HEA coatings, in which the Ti content was varied by changing the RF power applied to the Ti target. One exemplary TiZrNbTaFe film, deposited with a Ti target RF power of 75 W, was thoroughly examined. This film demonstrated several highly promising attributes as a novel metallic biomaterial, including a dense and fine microstructure, good adhesion quality, superior corrosion resistance, and exceptional biocompatibility both in vitro and in vivo . These findings could provide new insights for innovative biomaterials development and help address long-term implantation and implant failure issues.

physics, applied,materials science, coatings & films
Development of non-equiatomic Bio-HEAs based on TiZrNbTa-(Mo and Mn)

Jhuliene Elen Torrento,Tiago dos Santos Pereira de Sousa,Nilson Cristino da Cruz,Gerson Santos de Almeida,Willian Fernando Zambuzzi,Carlos Roberto Grandini,Diego Rafael Nespeque Correa

DOI: https://doi.org/10.1063/5.0100465

IF: 6.6351

2022-09-01

APL Materials

Abstract:This study produced non-equiatomic TiNbZrTaMn and TiNbZrTaMo high entropy alloy (HEAs) by argon arc-melting and heat-treated for microstructural homogenization. The phase composition, microstructure, and selected mechanical properties were measured and compared with theoretical predictions. Additionally, electrochemical and cytotoxicity tests evaluated their potential applicability for use as biomaterials. X-ray diffraction measurements patterns showed a single BCC phase for the TiNbZrTaMn and a secondary HCP phase for the TiNbZrTaMo sample. The microstructural analysis revealed the formation of irregular grain boundaries and some lamellae formation, with chemical segregation of the alloying elements at the sub-micro-scale. The samples exhibited elastic modulus (80–110 GPa) closer to CP-Ti grade 2 (100 GPa) and higher Vickers microhardness (450–550 HV) than Ti–6Al–4V alloy (400 HV). The electrochemical and biological tests indicated a superior corrosion resistance against 0.9% NaCl solution compared with commercial metallic biomaterials, with proper cell adhesion and viability of pre-osteoblastic cells and hydrophilic behavior. Altogether, the data indicate that TiNbZrTaMn depicts better applicability potential for being used as a biomaterial in biomedical applications than some commercial materials (SS 316L, CP-Ti grade 2, and Ti–6Al–4V), mainly considering load-bearing orthopedical implants.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Development of an equiatomic octonary TiNbTaZrMoHfWCr super-high-entropy alloy for biomedical applications

Tadaaki Matsuzaka,Akira Hyakubu,Yong Seong Kim,Aira Matsugaki,Takeshi Nagase,Takuya Ishimoto,Ryosuke Ozasa,Hyoung Seop Kim,Tomoji Mizuguchi,Ozkan Gokcekaya,Takayoshi Nakano

DOI: https://doi.org/10.1016/j.matchemphys.2024.129120

IF: 4.778

2024-03-01

Materials Chemistry and Physics

Abstract:A super-high-entropy alloy (SHEA) with Δ S mix ≥ 2.0 R (where R is the gas constant) was designed to produce metallic materials with superior mechanical properties to conventional alloys. As an alternative to conventional quinary high-entropy alloys (HEAs), herein, octonary SHEAs for biomedical applications (BioSHEAs) are proposed for the first time, and the TiNbTaZrMoHfWCr BioSHEA was fabricated. Arc-melted BioSHEA exhibited an extremely high yield strength of 1953 ± 84 MPa, which was approximately 550 MPa higher than that of the quinary TiNbTaZrMo BioHEA. This yield strength is considerably higher than that estimated by the rule of mixtures for pure metals, confirming the achievement of significant solid-solution strengthening induced by a supermulticomponent solid solution composed of elements with different atomic radii. Its biocompatibility was comparable to that of pure Ti and the quinary BioHEA, and superior to that of SUS316L. This study demonstrates the validity of a novel entropy-based guideline for increasing the mixing entropy to achieve metallic materials with ultrahigh strength.

materials science, multidisciplinary
Design and Fabrication of a 5Ti5Zr5Nb1Sn High‐Entropy Alloy as Metallic Biomedical Material

Zhenwei Liu,Pei Liu,Wei Yue,Aiqin Wang,Jingpei Xie

DOI: https://doi.org/10.1002/adem.202200068

IF: 3.6

2022-03-23

Advanced Engineering Materials

Abstract:Herein the present work, the thermodynamic, physical, and mechanical properties of different random solid solution structure models are first calculated based on first‐principles calculation method, and the optimal composition ratio of 5Ti5Zr5Nb1Sn is quickly selected as a new biomedical high‐entropy alloy (HEA) with a low elastic modulus and high strength–ductility balance. Then, 5Ti5Zr5Nb1Sn HEA is prepared by vacuum‐melting method. The microstructure characterization results show that the actual composition of 5Ti5Zr5Nb1Sn HEA corresponds to the calculated target composition, and the HEA consists of two phases BCC1 and BCC2 with distinct color and structure. The compressive yield strength and compressive elongation of the 5Ti5Zr5Nb1Sn HEA are 1171.2 MPa and 29.03%, respectively. The compressive elastic modulus is 22.4 GPa, which is within the range of human bone elastic modulus (10–30 GPa). There are many tiny dimples and small tearing edges in the compression fracture, showing obvious plastic deformation characteristics. The analysis results of potentiodynamic polarization curve show that the corrosion resistance of 5Ti5Zr5Nb1Sn HEA is equivalent to that of pure titanium. Therefore, 5Ti5Zr5Nb1Sn HEA possesses the characteristics of high strength and ductility, low elastic modulus, and excellent corrosion resistance, and has the potential to be used as metallic biomedical materials. 5Ti5Zr5Nb1Sn high‐entropy alloy (HEA) is designed as metallic biomedical material by first‐principles calculation. The 5Ti5Zr5Nb1Sn HEA consists of two phases BCC1 and BCC2 with distinct color and structure. Compressive yield strength and compressive elongation of 5Ti5Zr5Nb1Sn HEA are 1171.2 MPa and 29.03%, respectively. The 5Ti5Zr5Nb1Sn HEA exhibits compressive elastic modulus of 22.4 GPa and manifests excellent corrosion resistance.

materials science, multidisciplinary
Understanding the enhanced corrosion performance of two novel Ti-based biomedical high entropy alloys

H.C. Ozdemir,A. Nazarahari,B. Yilmaz,U. Unal,D. Canadinc,E. Bedir,R. Yilmaz,H.J Maier

DOI: https://doi.org/10.1016/j.jallcom.2023.170343

IF: 6.2

2023-04-30

Journal of Alloys and Compounds

Abstract:The microstructure and corrosion behavior of two novel biomedical high entropy alloys (HEA)s, namely Hf 27 Nb 12 Ta 10 Ti 23 Zr 28 and Hf 30 Nb 14 Ta 10 Ti 28 Zr 18 that were previously designed utilizing machine learning, were investigated in depth. The microstructure of the alloys was determined to be dendritic, with some elemental segregations governed by the solidification kinetics occurring during the arc-melting process. Static immersion experiments were carried out in artificial saliva (AS) and simulated body fluid (SBF) to investigate the ion release behavior of the HEAs and reveal the dissolution kinetics of the passive film forming on the surface. The composition of the corresponding surface oxide layers was examined using X-ray photoelectron spectroscopy, which provided detailed insight into the stability of passive oxide layers and sub-oxide formation. Potentiodynamic polarization experiments performed in AS and SBF at 37 oC demonstrated that both HEAs exhibit superior corrosion behavior compared to the CoCrMo alloy, one of the conventional metallic implant materials of choice.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Mechanical, Corrosion, and Wear Properties of TiZrTaNbSn Biomedical High-Entropy Alloys

Wang,Hu,Ma,Yang,Zhu,Dong,Xiao,Yang

DOI: https://doi.org/10.3390/coatings12121795

IF: 3.236

2022-11-22

Coatings

Abstract:The phase composition, microstructure, mechanical, corrosion, and wear behaviors of the Ti15Zr35Ta10Nb10Sn30 (Sn30) and Ti15Zr30Ta10Nb10Sn35 (Sn35) biomedical high-entropy alloys (BHEAs) were studied. We found that the Ti–Zr–Ta–Nb–Sn BHEAs showed hyper-eutectic and eutectic structures with body-centered cubic (BCC) and face-centered cubic (FCC) solid-solution phases. The Sn30 BHEA exhibited a high Vickers hardness of approximately 501.2 HV, a compressive strength approaching 684.5 MPa, and plastic strain of over 46.6%. Furthermore, the Vickers hardness and compressive strength of Sn35 BHEA are 488.7 HV and 999.2 MPa, respectively, with a large plastic strain of over 49.9%. Moreover, the Sn30 and Sn 35 BHEA friction coefficients are 0.152 and 0.264, respectively. Sn30 BHEA has the smallest and shallowest furrow-groove width, and its wear rate is 0.86 (km/mm3); at the same time, we observed the delamination phenomenon. Sn35 BHEA has a wear rate value of 0.78 (km/mm3), and it displays wear debris and the largest–deepest furrow groove. Sn30 BHEA has the highest impedance value, and its corrosion current density Icorr is 1.261 × 10−7 (A/cm2), which is lower than that of Sn35 BHEA (1.265 × 10−6 (A/cm2)) by 88%, and the passivation current density Ipass of Sn30 BHEA and Sn35 BHEA is 4.44 × 10−4 (A/cm2) and 3.71 × 10−3 (A/cm2), respectively. Therefore, Sn30 BHEA preferentially produces passive film and has a small corrosion tendency, and its corrosion resistance is considerably better than that of the Sn35 BHEA alloy.

materials science, multidisciplinary,physics, applied, coatings & films
Biocompatible As-Cast and Homogenized TiNbTaZrMoV High Entropy Alloys: Mechanical Properties, Corrosion Resistance and in Vitro Studies

Kuan-Cheng Lai,Shih-Chieh Chao,Ko-Kai Tseng,Jien-Wei Yeh,Po -Yu Chen

DOI: https://doi.org/10.1016/j.jmrt.2023.05.201

2023-01-01

Abstract:Commercial 316L SS, CoCrMo, and Ti6Al4V alloys have been widely used as implant materials for biomedical applications. However, the inadequate wear resistance and the released metal ions could result in inflammation, cytotoxicity, and shorten the lifespan of surgical implants. To extend the service life and durability of metallic biomaterials, the TiNbTaZrMoV HEA was developed by integrating biocompatibility characteristics with the unique properties of high-entropy alloys (HEAs). Both as-cast TiNbTaZrMo and TiNbTaZrMoV HEAs consisted of dual BCC phases in the dendritic structure: the dendrite region was enriched with Ta, Mo, and Nb, while Zr, Ti, and V were concentrated in the interdendrite region. The homogenized TiNbTaZrMoV HEA possessed a single BCC phase with a homogeneous component distribution. Moreover, the wear resistance of the homogenized TiNbTaZrMoV HEA was superior to the as-cast TiNbTaZrMo and TiNbTaZrMoV HEAs. In terms of electrochemical behaviors, the homogenized TiNbTaZrMoV HEA exhibited superior corrosion resistance compared to the other commercial metallic biomaterials in phosphate-buffered saline solution at 37 °C. The in vitro biocompatibility evaluation revealed that the homogenized TiNbTaZrMoV HEA could support the attachment and proliferation of the MC3T3-E1 cells, presenting good biocompatibility comparable to the Ti6Al4V alloy. This study demonstrated the feasibility of the homogenized TiNbTaZrMoV HEA for orthopedic bioimplant applications.
Structural, mechanical and biocompatible evaluation of nanocrystalline Ti-Nb-Ta-Cr-Co 0.2 HEA for implant applications

Chitrance Kumar Srivastav,Mayank Gangwar,Nand Kishore Prasad,Debashis Khan

DOI: https://doi.org/10.1016/j.mtcomm.2024.109355

IF: 3.8

2024-06-02

Materials Today Communications

Abstract:High entropy alloys (HEAs) have attracted significant interest in the field of medical applications due to their unique functional properties and remarkable strength. Thus, several Ti-based HEAs have been proposed for bone implants. For the same, the current study proposes a Ti-Nb-Ta-Cr-Co 0.2 based HEA, which exhibits better properties compared to commonly used implant materials (such as 316 L, cp-Ti, Co-Cr-Mo, and Ti-6Al-4 V alloys). The preliminary selection of the atomic % of individual elements for the aforementioned HEA is based on the parametric approach. The proposed combination after mechanical alloying for 50 h suggested the coexistence of two BCC phases. This was confirmed by X-ray and electron diffractions. The obtained powder was then consolidated through spark plasma sintering at 1000 °C, resulting into two BCC and one HCP phases. The sintered sample has shown hardness, compressive strength, and Young's modulus values as ∼652 HV, ∼1418 MPa, and ∼82 GPa respectively, which makes it mechanically suitable for the implant application. Additionally, the present HEA after SPS sintering also displayed suitable biocompatibility with MG-63 cells which was evaluated by MTT assay.

materials science, multidisciplinary
Additively manufactured high entropy alloy with high wear resistance for biomedical implant

Cijun Shuai,Jiading Xie,Xihao Jiang,Shuping Peng,Chunming Wang

DOI: https://doi.org/10.1016/j.vacuum.2023.112939

IF: 4

2023-12-30

Vacuum

Abstract:Titanium and its alloys play a vital role as implant materials in orthopedic and dental surgery. However, its poor wear resistance limits its application in the medical field. High entropy alloy (HEA) has high wear resistance due to the combined action of high entropy, lattice distortion, and cocktail effects. In this work, TiFeCrCoNi HEA is prepared by Laser powder bed fusion (LPBF) under the protection of high pure Ar gas . The results show the TiFeCrCoNi HEA has mainly FCC phase and a small amount of Hexagonal and Laves phases . Its microhardness is up to 776.3 ± 21.4 H V and is 2.8 times that of pure Ti. Meanwhile, the HEA has a low friction coefficient of 0.1–0.15, which is attributed to high hardness precipitates and grain refinement. The main wear mechanism of the HEA is oxidation wear, adhesive wear , and abrasive wear. In addition, the TiFeCrCoNi HEA also demonstrates good biocompatibility.

materials science, multidisciplinary,physics, applied

Porosity modeling in a TiNbTaZrMo high-entropy alloy for biomedical applications

Bio-Corrosion Behaviors and Bio-Compatibilities of Tinbzrta and Tinbzrtamo High Entropy Alloys

Design and properties of novel Ti–Zr–Hf–Nb–Ta high-entropy alloys for biomedical applications

Mechanical, corrosion, and wear properties of biomedical Ti–Zr–Nb–Ta–Mo high entropy alloys

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Preparation of TiNbTaZrMo high-entropy alloy with tunable Young's modulus by selective laser melting

Microstructural, Mechanical, and Electrochemical Characterization of CrMoNbTiZr High-Entropy Alloy for Biomedical Application

An efficient approach to develop and screen out high-entropy alloy composition with high performance for biomedical application

Development of TiNbTaZrMo bio-high entropy alloy (BioHEA) super-solid solution by selective laser melting, and its improved mechanical property and biocompatibility

GPa-level pressure-induced enhanced corrosion resistance in TiZrTaNbSn biomedical high-entropy alloy

New TiTaNbZrMo high-entropy alloys for metallic biomaterials

Alloy Design and Properties Optimization of High-Entropy Alloys

Mechanical properties and biocompatibility evaluation of TiZrNbTaFe high entropy alloy films deposited using a hybrid HiPIMS and RF sputtering system

Development of non-equiatomic Bio-HEAs based on TiZrNbTa-(Mo and Mn)

Development of an equiatomic octonary TiNbTaZrMoHfWCr super-high-entropy alloy for biomedical applications

Design and Fabrication of a 5Ti5Zr5Nb1Sn High‐Entropy Alloy as Metallic Biomedical Material

Understanding the enhanced corrosion performance of two novel Ti-based biomedical high entropy alloys

Mechanical, Corrosion, and Wear Properties of TiZrTaNbSn Biomedical High-Entropy Alloys

Biocompatible As-Cast and Homogenized TiNbTaZrMoV High Entropy Alloys: Mechanical Properties, Corrosion Resistance and in Vitro Studies

Structural, mechanical and biocompatible evaluation of nanocrystalline Ti-Nb-Ta-Cr-Co 0.2 HEA for implant applications

Additively manufactured high entropy alloy with high wear resistance for biomedical implant