Abstract:Plasticized PVC formulated with different kinds of normally used plasticizers, including bis(2-ethylhexyl) phthalate (DOP), dioctyl terephthalate (DOTP), acetyl tri-n-butyl citrate (ATBC), acetyl trioctyl citrate (ATOC), trioctyl trimellitate (TOTM), and a new vegetable devived plasticizer, isosorbide ester (ID-37), were prepared by a melt blending method. The effect of plasticizer on the thermal degradation behavior of plasticized PVC was investigated by thermal gravimetric analysis (TGA). The activation energies were calculated by three well known methods, developed by Flynn-Wall-Ozawa (FWO), Friedman and Kissinger, respectively. The TGA conducted in N-2 atmosphere showed that the type of plasticizer had an obvious influence on the thermal stability of plasticized PVC. It was found that the peak temperatures (T-P) of the thermal degradation processes shifted to higher temperature with the increase of the heating rate, with two processes being shown. The activation energy of the first thermal decomposition process (E-1), calculated by the Kissinger method, was between 118 and 130kJ/mol, while the activation energy of the second thermal decomposition process (E-2) was between 261 and 305kJ/mol, except 499kJ/mol for the PVC/TOTM formulation. The corresponding values of E-1 and E-2 obtained by the Flynn-Wall-Ozawa method were similar to the above data. E of the sample with TOTM also showed a higher value than the others; the results demonstrated that the PVC plasticized with TOTM was more thermally stable than with the others. The activation energies for certain conversion degrees were calculated by the Friedman method and the FWO method. The value of activation energy for 20%, 50%, and 80% conversion calculated by the Friedman method, exhibited an apparent difference from that calculated by the Flynn-Wall-Ozawa method; the results showed that the value of E obtained by the Friedman method was much more reasonable than that obtained by the Flynn-Wall-Ozawa method.

Effect of deplasticization on physical properties PVC compound

Effects of Physical Crosslinking on Properties of Plasticized High Molecular Weight PVC

Plasticizer Effect of Dibutyl Phthalate on the Morphology and Mechanical Properties of Hard Elastic Poly(Vinylidene Fluoride) Fibers

The Effect of Dicarboxylic Acid Structure on the Plasticizing Ability of Its Ester

The Crystallinity of Pvc and Its Effect on Physical Properties

Cooperation Between Chemical and Physical Crosslinking in Plasticized and Lightly Chemical Crosslinked Poly(Vinyl Chloride)

Impact of the nature and concentration of plasticizers on the ability of PVC to sorb drug

Epoxidized esters of succinic acid, oleic acid and propylene glycol as an effective bioplasticizer for PVC: A study of processing conditions on the physico‐chemical properties

Chemical, thermal and mechanical evaluation of poly(vinyl chloride) plastisol with different plasticizers

Thermomechanical Properties of Nontoxic Plasticizers for Polyvinyl Chloride Predicted from Molecular Dynamics Simulations

Effect of Plasticizer on Property of Films of Polymer-Polyvinyl Alcohol

Investigation of the Effect of a Biocidal Additive on the Strength Characteristics of PVC Materials

Anomalous conductivity dependence of plasticized PVC for different modificator "A" concentrations and film thicknesses

Thermal Degradation Kinetics of Plasticized Poly (vinyl Chloride) with Six Different Plasticizers

A comparative study of comprehensive performances for transparent plasticized polyvinyl chloride films with different plasticizers

Study of PVC/CM Thermoplastic Elastomer

Influence of composition on physical and mechanical properties of modified PVC

Biodegradable PVC plasticizer derived from a new CO2-based Poly(carbonate-ester) macrodiol: Molecular design and plasticizing effect

Effect of Biofilm Forming on the Migration of Di(2-ethylhexyl)phthalate from PVC Plastics

Hydrogenation induced deviation of temperature and concentration dependences of polymer-solvent interactions in poly(vinyl chloride) and a new eco-friendly plasticizer

Effect of benzene ring and alkane chain contained bio-based plasticizers on the plasticizing performance of polyvinyl chloride films