Abstract:Polymer composites are a class of material that are gaining a lot of attention in demanding tribological applications due to the ability of manipulating their performance by changing various factors, such as processing parameters, types of fillers, and operational parameters. Hence, a number of samples under different conditions need to be repeatedly produced and tested in order to satisfy the requirements of an application. However, with the advent of a new field of triboinformatics, which is a scientific discipline involving computer technology to collect, store, analyze, and evaluate tribological properties, we presently have access to a variety of high-end tools, such as various machine learning (ML) techniques, which can significantly aid in efficiently gauging the polymer's characteristics without the need to invest time and money in a physical experimentation. The development of an accurate model specifically for predicting the properties of the composite would not only cheapen the process of product testing, but also bolster the production rates of a very strong polymer combination. Hence, in the current study, the performance of five different machine learning (ML) techniques is evaluated for accurately predicting the tribological properties of ultrahigh molecular-weight polyethylene (UHMWPE) polymer composites reinforced with silicon carbide (SiC) nanoparticles. Three input parameters, namely, the applied pressure, holding time, and the concentration of SiCs, are considered with the specific wear rate (SWR) and coefficient of friction (COF) as the two output parameters. The five techniques used are support vector machines (SVMs), decision trees (DTs), random forests (RFs), k-nearest neighbors (KNNs), and artificial neural networks (ANNs). Three evaluation statistical metrics, namely, the coefficient of determination (R2-value), mean absolute error (MAE), and root mean square error (RMSE), are used to evaluate and compare the performances of the different ML techniques. Based upon the experimental dataset, the SVM technique was observed to yield the lowest error rates-with the RMSE being 2.09 × 10-4 and MAE being 2 × 10-4 for COF and for SWR, an RMSE of 2 × 10-4 and MAE of 1.6 × 10-4 were obtained-and highest R2-values of 0.9999 for COF and 0.9998 for SWR. The observed performance metrics shows the SVM as the most reliable technique in predicting the tribological properties-with an accuracy of 99.99% for COF and 99.98% for SWR-of the polymer composites.

Modelling of performance parameters of phenolic base resins Non-Asbestos Organic (NAO) friction material in brake pad using machine learning algorithms

Triboinformatic modeling of dry friction and wear of aluminum base alloys using machine learning algorithms

Triboinformatics Approach for Friction and Wear Prediction of Al-Graphite Composites Using Machine Learning Methods

Machine Learning and Materials Informatics Approaches for Predicting Transverse Mechanical Properties of Unidirectional CFRP Composites with Microvoids

Prediction of frictional behaviour through regression equations: A statistical modelling approach validated with machine learning

Optimized machine learning with hyperparameter tuning and response surface methodology for predicting tribological performance in bio‐composite materials

Modeling and prediction of tribological properties of copper/aluminum-graphite self-lubricating composites using machine learning algorithms

Tribo-informatics approach to predict wear and friction coefficient of Mg/Si 3 N 4 composites using machine learning techniques

Prediction of Tribological Properties of UHMWPE/SiC Polymer Composites Using Machine Learning Techniques

Integrating Friction Noise for In-Situ Monitoring of Polymer Wear Performance: A Machine Learning Approach in Tribology

Experimental Investigation of the Influence of Various Wear Parameters on the Tribological Characteristics of AZ91 Hybrid Composites and Their Machine Learning Modeling

Prediction of friction coefficient of su-8 and its composite coatings using machine learning techniques

Prediction and comparative analysis of friction material properties using a GA-SVM optimization model

Thermomechanical analysis of hybrid friction composite material and its correlation with friction braking performance

Modelling and parameter identification of coefficient of friction for deep-drawing quality steel sheets using the CatBoost machine learning algorithm and neural networks

Tribological and Mechanical Behavior of Brake Composite with ANN and TOPSIS

A machine learning case study with limited data for prediction of carbon fiber mechanical properties

Prediction of the tribological properties of a polymer surface in a wide temperature range using machine learning algorithm based on friction noise

Triboinformatic modeling of the friction force and friction coefficient in a cam-follower contact using machine learning algorithms