Abstract:Considering the significant harm caused to aquatic ecosystems and marine life by oil spills and the discharge of oily wastewater, there is a pressing need to address this issue to protect our environment and prevent the wastage of valuable resources. We introduced a one-step approach to create an anti-swelling, water-repellent sorbent using a green polysaccharide called gum gellan, functionalized with Octadecyl trichlorosilane (OTS) through dip coating method. Natural gums like gellan have high absorption capability due to their large surface area. However, they are hydrophilic, which means they can only absorb water. This property makes them unsuitable for oil spill applications. To make gum gellan suitable for oil spill applications, we have modified it in this study. We have introduced a material called octadecyltrichlorosilane, which has low surface energy and hierarchical roughness. This modification changes the wettability of gellan from hydrophilic to hydrophobic/oleophilic, allowing it to absorb oil and repel water. The sorbent is analyzed using several techniques, such as FTIR, XRD, TGA, FE-SEM, BET, Raman, EDX, and H1-NMR. The hydrophobic sorbent obtained demonstrates low density, high surface area, and high porosity. These characteristics give it excellent floatability and immediate and exceptional selectivity for absorbing oil from water. Additionally, it does not absorb any detectable amount of water. The sorbent exhibited a water contact angle (WCA) of 140 3 and an oil contact angle (OCA) of 0˚ for various oils and organic solvents. It has rapid oil absorption capacity of 3.0 g/g for petrol, and can be easily recovered after use. The BET analysis revealed that after the modification with OTS, the sorbent's total surface area increased from 0.579 m2/g to 4.713 m2/g. This indicates that the OTS modification greatly enhances the surface area and pore volume of the, thus improving its ability to absorb oil. This sorbent efficiently separates oil-in-water emulsions, both surfactant-stabilized and surfactant-free, achieving over 90% separation through gravity alone. Moreover, the sorbent can sustain its wettability even under harsh environmental conditions, including exposure to acids, alkalis, and salts. The absorption data predominantly aligned with the pseudo-2nd-order model. Thus, this sorbent provides a cost-effective alternative for efficiently absorbing and separating oil-water emulsions in households and industries.

Treatment of Turbid Water Collected from Oil Mill Waste (OMW) Using Low Content of Gum Arabic polymer (GA)

Effect of Gum Arabic on the Clarity of Artificially Turbid Water and Ground Water Systems

Comparison of Coagulative Colloidal Microbubbles with Monomeric and Polymeric Inorganic Coagulants for Tertiary Treatment of Distillery Wastewater.

Clearing Treatment of Polymer Containing Oilfield Produced Water by Using Coagulants/Flocculants

Guar Gum-Based Hydrogels as Potent Green Polymers for Enhanced Oil Recovery in High-Salinity Reservoirs

New insights into guar gum as environmentally friendly polymer for enhanced oil recovery in high-salinity and high-temperature sandstone reservoirs

The Dye-Contaminated Water Treatment Efficiency of Two Types of Geopolymers: A Comparative Study of Structural, Microstructural and Adsorption Properties

Silica Functionalized Almond Gum Derivatives for Integrated Flocculation Cycles for Natural and Synthetic Water Systems

Microwave‐assisted synthesis, characterization, and application of tragacanth gum grafted copolymer as bioflocculant for the treatment of textile wastewater using coagulation‐flocculation technique: Swelling behavior and biodegradation studies

Treatment of Fish-Processing Wastewater Using Polyelectrolyte and Palm Anguish

Synthesis of a new flocculant based on poly(acrylamide-co-(N-octyl-4-vinylpyridinium bromide)) [AM5/VP5C8Br]-application for the turbidity removal from clay suspension

Changes in Turbidity, Zeta Potential and Precipitation Yield Induced by Persian Gum-Whey Protein Isolate Interactions During Acidification

Application of grape seed and Austrocylindropuntia mucilage for the simultaneous removal of azo dye and turbidity from synthetic wastewater: Optimizing experimental conditions using Box-Behnken Design (BBD)

Enhanced Coagulation/Flocculation by Combining Diatomite with Synthetic Polymers for Oily Wastewater Treatment

Efficient Oil Spill Cleanup from water: Investigating the Effectiveness of a Sustainable Anti-Swelling Hydrogel for Rapid Water Repellency and Oil Absorption

Removal of basic fuchsin from aqueous solution using polyacrylamide and gellan gum-based hydrogels

Polymer Application Examples in Industrial Wastewater Treatment

Kinetic modelling and process optimization of textile effluent treatment with bacterial gamma polyglutamic acid

Wheat bran/polymer composites as a solidifier to gel oil on water surface

Study on the flocculating properties of grafted copolymer of cationic guar gum-acrylamide

Facile synthesis and optimization of Acacia senegal gum hydrogel for kinetically treated adsorptive removal of targeted industrial effluents