Abstract:In the direct laser deposition (DLD) process, it is common to employ constant processing parameters. The utilization of the constant parameters may lead to fluctuations in the dynamic evolution of the molten pool, primarily due to the intricate thermal effects involved, which will significantly impact the processing quality. To address this issue, this study proposed a closed-loop control approach that effectively modifies processing parameters in real time by targeting on the molten pool transient area. The type of the laser used in this study is a flat-top beam. Laser power, powder feeder rate, and scanning speed are the input variables of the study to control molten pool, considering the manufacturing system. The most suitable processing parameter to control the molten pool area was found to be the laser power by a set of orthogonal experiments, with a correlation coefficient of 0.706, and significance level of 0.002. Then, the dynamic response relationship between laser power and the molten pool area was mathematically characterized by a third-order transfer function model to simplify the complex physical model of the DLD process. Subsequently, a PID controller with a filtering coefficient and anti-windup compensation was chosen compared with the other controller. In the validation experiments, it was observed that the closed-loop processing group demonstrated improved stability in maintaining the molten pool transient area, with a notable decrease of 33.7% in variability compared to the open-loop processing group. As a result, the deposited layer of the closed-loop processing group exhibited a much more satisfying surface quality and heat affect zone than the open-loop group. This study established a third-order mathematical model of the dynamic molten pool and realized the optimization of deposition quality by controlling the molten pool transient area with an enhanced PID controller, providing a fundamental basis for improving the consistency of the direct laser deposition processing quality through the implementation of real-time feedback control of molten pool physics.

Research on Temperature Control of Plastic Laser Welding Based on Improved Snake Optimization Algorithm

Research and Application of Advanced Process Control for Plastic Injection Molding Machine Temperature

Performance monitoring and assessment for PID controller

High Precision Temperature Control for Plastic Film Based on a Combined Method

Optimization Design Based on PSO Algorithm for PID Controller

Robust Pid Controller Design Using Co-Evolutionary Particle Swarm Optimization

Novel PID Controller Parameters Tuning Method.

Intelligent Optimization Design of PID Controller for Integrating Processes

Oil temperature control of large hydraulic system

The Temperature Control of Laser Thermal Desorption System Based on Parameters Self-Tuning Fuzzy PID Algorithm

A Design Method of Temperature Controller for High-Precision Laser

A Particle Swarm Optimization Approach For Pid Parameters In Hydraulic Servo Control System

Research and Application of Improved Particle Swarm Fuzzy PID Algorithm Based on Self- Disturbance Rejection in Temperature Control System of Plastic Extruder

An improved control strategy of single neuron PID

Optimization of PID Control Parameters for Belt Conveyor Tension Based on Improved Seeker Optimization Algorithm

Variable-Structure Proportional–Integral–Derivative Laser Solder Joint Temperature Intelligent Control Method with Adjustable Power Upper Limit

[An Improved PID Algorithm for Temperature Control Used by Tumor Combined Therapeutic Instrument].

Optimization of PID controller for stepper motor speed control system based on improved sparrow search algorithm

Performance assessment and tuning of PID control using TLBO: the single-loop case and PI/P cascade case

Modeling and numerical analysis of PID-controlled phase-change transpiration cooling

Real-time closed-loop control of molten pool transient area in direct laser deposition via PID algorithm with enhanced robustness