Abstract:Background: Diisocyanates (isocyanates), including methylene diphenyl diisocyanate (MDI), are the primary reactive components of spray polyurethane foam (SPF) insulation. They are potent immune sensitizers and a leading cause of occupational asthma. Skin exposure to isocyanates may lead to both irritant and allergic contact dermatitis and possibly contribute to systemic sensitization. More than sufficient evidence exists to justify the use of protective garments to minimize skin contact with aerosolized and raw isocyanate containing materials during SPF applications. Studies evaluating the permeation of protective garments following exposure to SPF insulation do not currently exist.Objectives: To conduct permeation testing under controlled conditions to assess the effectiveness of common protective gloves and coveralls during SPF applications using realistic SPF product formulations.Methods: Five common disposable garment materials [disposable latex gloves (0.07 mm thickness), nitrile gloves (0.07 mm), vinyl gloves (0.07 mm), polypropylene coveralls (0.13 mm) and Tyvek coveralls (0.13 mm)] were selected for testing. These materials were cut into small pieces and assembled into a permeation test cell system and coated with a two-part slow-rise spray polyurethane foam insulation. Glass fiber filters (GFF) pretreated with 1-(9-anthracenylmethyl)piperazine) (MAP) were used underneath the garment to collect permeating isocyanates. GFF filters were collected at predetermined test intervals between 0.75 and 20.00 min and subsequently analyzed using liquid chromatography-tandem mass spectrometry. For each garment material, we assessed (i) the cumulative concentration of total isocyanate, including phenyl isocyanate and three MDI isomers, that effectively permeated the material over the test time; (ii) estimated breakthrough detection time, average permeation rate, and standardized breakthrough time; from which (iii) recommendations were developed for the use of similar protective garments following contamination by two-component spray polyurethane foam systems and the limitations of such protective garments were identified.Results: Each type of protective garment material demonstrated an average permeation rate well below the ASTM method F-739 standardized breakthrough rate threshold of 100.0 ng/cm2 min-1. Disposable latex gloves displayed the greatest total isocyanate permeation rate (4.11 ng/cm2 min-1), followed by the vinyl and nitrile gloves, respectively. The Tyvek coverall demonstrated a greater average rate of isocyanate permeation than the polypropylene coveralls. Typical isocyanate loading was in the range of 900 to 15,000 ng MDI/cm2.Conclusion: Permeation test data collected during this study indicated that each type of protective garment evaluated, provided a considerable level of protection (i.e. 10-110-fold reduction from the level of direct exposure) against the isocyanate component of the SPF insulation mixture. Nitrile gloves and polypropylene coveralls demonstrated the lowest rate of permeation and the lowest cumulative permeation of total isocyanate for each garment type.

STUDY OF THE AIR PERMEABILITY INDICATOR OF A PACKAGE OF MATERIALS OF THERMAL CLOTHING FOR CHILDREN WITH A DIAGNOSIS OF CP

Physiological and hygienic substantiation of development of a technique of an estimation of overalls for protection working in the heating environment on indicators of a thermal condition

Effect of Phase Change Materials on Temperature and Moisture Distributions in Clothing During Exercise in Cold Environment

Providing thermal exchange when designing special clothing

DETERMINATION OF THE EFFICIENCY OF APPLICATION OF PACKAGES OF TEXTILE MATERIALS FOR THE PRODUCTION OF A SPECIAL PURPOSE JACKET

Flammability and Thermoregulation Performance of Multilayer Protective Clothing Incorporated with Phase Change Materials

Apparatus and test method for characterizing the temperature regulating properties of thermal functional porous polymeric materials

Correlation of Air Permeability to Other Breathability Parameters of Textiles

Thermal behavior of flexible and breathable sandwich fibrous polyethylene glycol (PEG) encapsulations

PBAT/PLA-Based Electrospun Nanofibrous Protective Clothes with Superhydrophobicity, Permeability, and Thermal Insulation Characteristics for Individuals with Disabilities

Intelligent bidirectional thermal regulation of phase change material incorporated in thermal protective clothing

Comprehensive Evaluation of Thermal and Moisture Comfortableness of Fabric for Firefighter Protective Clothing

Thermal and functional condition of microbiological laboratory workers when using personal protective equipment against biological factors

Testing of Disposable Protective Garments Against Isocyanate Permeation From Spray Polyurethane Foam Insulation

Simultaneous Contact Sensing and Characterizing of Mechanical and Dynamic Heat Transfer Properties of Porous Polymeric Materials

Enhanced thermoregulation performance of knitted fabrics using phase change material incorporated thermoplastic polyurethane and cellulose acetate nanofibers

Thermal and breathability management of microencapsulated phase change material (MPCM) incorporated jute fabric

Thermal Insulation of Protective Clothing Materials in Extreme Cold Conditions

Heat and moisture transfer properties of a firefighter clothing with a new fire-resistant underwear

Advancing tent thermoregulation: Integrating shape-stabilized PCM into fabric design

ANALYSIS OF THE THERMAL REGULATING PROPERTIES OF FIRE-FIGHTING PROTECTIVE CLOTHING WITH AN INCORPORATED PHASE-CHANGE MATERIAL