Abstract:Edible hydrogel coatings or films in comparison to conventional food packaging materials are characterized as thin layers obtained from biopolymers that can be applied or enveloped onto the surface of food products. The use of lipid-containing hydrogel packaging materials, primarily as edible protective coatings for food applications, is recognized for their excellent barrier capacity against water vapor during storage. With the high brittleness of waxes and the oxidation of different fats or oils, highly stable agents are desirable. Jojoba oil obtained from the jojoba shrub is an ester of long-chain fatty acids and monovalent, long-chain alcohols, which contains natural oxidants α, β, and δ tocopherols; therefore, it is resistant to oxidation and shows high thermal stability. The production of hydrogel films and coatings involves solvent evaporation, which may occur in ambient or controlled drying conditions. The study aimed to determine the effect of drying conditions (temperature from 20 to 70 °C and relative humidity from 30 to 70%) and jojoba oil addition at the concentrations of 0, 0.5, 1.0, 1.5, and 2.0% on the selected physical properties of hydrogel edible films based on whey protein isolate. Homogenization resulted in stable, film-forming emulsions with bimodal lipid droplet distribution and a particle size close to 3 and 45 μm. When higher drying temperatures were used, the drying time was much shorter (minimum 2 h for temperature of 70 °C and relative humidity of 30%) and a more compact structure, lower water content (12.00–13.68%), and better mechanical resistance (3.48–3.93 MPa) of hydrogel whey protein films were observed. The optimal conditions for drying hydrogel whey protein films are a temperature of 50 °C and an air humidity of 30% over 3 h. Increasing the content of jojoba oil caused noticeable color changes (total color difference increased from 2.00 to 2.43 at 20 °C and from 2.58 to 3.04 at 70 °C), improved mechanical elasticity (the highest at 60 °C from 48.4 to 101.1%), and reduced water vapor permeability (the highest at 70 °C from 9.00·10−10 to 6.35·10−10 g/m·s·Pa) of the analyzed films. The observations of scanning electron micrographs showed the heterogeneity of the film surface and irregular distribution of lipid droplets in the film matrix.

Manufacture of Edible Films from Wheat Germ Protein and Study of its Mechanical Properties

Properties of Edible Film Base on Agar and Maltodextrin Blends

High-performance films fabricated by food protein nanofibrils loaded with vanillin: Mechanism, characterization and bacteriostatic effect

Development and Assessment of Duplex and Triplex Laminated Edible Films Using Whey Protein Isolate, Gelatin and Sodium Alginate

Effect of Drying Conditions and Jojoba Oil Incorporation on the Selected Physical Properties of Hydrogel Whey Protein-Based Edible Films

Extrusion-controlled Lipid Retention and Distribution of Wheat Germ and Its Application Combing Exogenous Starch

Bioactive Edible Gel Films Based on Wheat Flour and Glucose for Food Packaging Applications

Mechanical properties and water absorption of wheat gliadin films

Development of Dry Walnut Shell Edible Film Plasticized with Glycerol and/or Sorbitol and Incorporated with Aloe Vera Gel and Lemon Essential Oil

Physical and mechanical characterization of microwave and ultrasound-modified zein-corn starch edible films

Factors Affecting the Physical Properties of Edible Composite Film Prepared from Zein and Wheat Gluten

Characterization of Composite Edible Films Based on Pectin/Alginate/Whey Protein Concentrate

Research on Properties of Edible Films Prepared from Zein, Soy Protein Isolate, Wheat Gluten Protein by Adding Beeswax

Physical, mechanical, and antimicrobial properties of active edible film based on milk proteins incorporated with Nigella sativa essential oil

Preparation and characterization of a new edible film based on Persian gum with glycerol plasticizer

Effects of Extrusion Variables on the Properties of Waxy Hulless Barley Extrudates

Development and Characterization of a Novel Edible film Based on Xanthoceras sorbifolia Seed Kernel Protein Isolate: Effects of Plasticizers and pH Value

Effect of dual physical modifications on structural and functional properties of gluten and whey protein: Ultrasound and microwave

The Effect of Different Plasticizers on the Characteristics of Whey Composite Edible Film

Emulsifying properties of wheat germ protein: Effect of different ultrasonic treatment

Development of A Bulgur-Like Product Using Extrusion Cooking