Abstract:This study aims determination if the sand collected from Injana and Dibdibba Formations are suitable for use as low-cost raw materials in the manufacture of high-purity crystalline silica. Sand is distributed in vast quantities within the two Formations, which occupy large portions of Iraq's southern desert. Quartz is the predominant mineral phase, followed by calcite, feldspar, and dolomite respectively, based on mineral analysis data. SiO 2 is the main oxide in sand with an average of (82.76%), (90.24%) and the rest of oxides are CaO (6.28%), (1.64%), Al 2 O 3 (4.02%),(3.19%), Fe 2 O 3 (2.73%), (0.86%), K 2 O+ Na 2 O (2.05%), (2.51%), SO 3 (0.05%), (0.47%), MnO (0.01%), (0.03%) P 2 O 2 (0.23%),(0.03%), and MgO (1.75%), (1.01%) in Injana and Dibdibba Formations respectively, which are considered as impurities impact the manufacturing properties of sand. The coprecipitation method, which produces high purity crystalline silica at a low cost, involves three steps: the first involves soaking raw sand powder in 2M HCl for 24 hours; The second involves mix purified sand with NaOH while stirring and heating it to 95C° to produce Na 2 SiO 3 ; and the third involves adding 3M HCl to sodium silicate solution to produce Si(OH) 4 and drying it to produce high purity of silica. The prepared silica got mineral analysis and chemical analysis. The synthesized silica was in the crystalline phase, according to the results of the mineral characterization. In synthetic silica of Injana and Dibdibba sand, The amount of SiO 2 increased according to chemical analysis, reaching 96.62%, and 97.69% respectively, while all other oxides (impurities) were lowered to their lowest levels. FE-SEM revealed the existence of spherical, well-agglomerated synthetic silica particles within the size 28.6 nm and 24.76 nm in synthetic silica particles of Injana sand and Dibdibba sand respectively.

Synthesis and Characterization of Mesoporous Silica Nanoparticles from Jordanian Glass Sand

Extraction and Physicochemical Characterization of Highly-pure Amorphous Silica Nanoparticles from Locally Available Dunes Sand

Synthesis and preparation of Nano-silica particles from Iraqi western region silica sand via SOL-GEL method

Statistical Optimization and Desirability Function for Producing Nano Silica from Dune Sand by Sol–gel Method Towards Methylene Blue Dye Removal

Facile Extraction and Characterization of Silica Nanopowder from Marine National Park beach sand via Alkali Fusion Route

Protocrystallinity of Monodispersed Ultra-Small Templated Mesoporous Silica Nanoparticles

Synthesis and characterization of lithium alumina silicate (LiAl(SiO3)2) from naturally sourced silica: a comparative study

Synthesis and characterization of micrometer-sized silica aerogel nanoporous beads

A Novel Method To Synthesize Amorphous Silica−Alumina Materials with Mesoporous Distribution without Using Templates and Pore-Regulating Agents

Effect of Temperature and Method of Synthesis on Morphology and Phase Transition of Amorphous and Crystalline Nano Silica Extracted from Mission Grass (Pennisetum Polystachion)

Facile Preparation and Characterization of Silica Nanoparticles from South Africa Fly Ash Using a Sol–Gel Hydrothermal Method

Synthesis and Characterisation of Nano-silica Based on Pumice Using NaOH

Synthesis and Formation Mechanism of Aminated Mesoporous Silica Nanoparticles

Fabrication of mesoporous silica nanoparticles by sol gel method followed various hydrothermal temperature

Preparation of nano-silica powder from silica sand via sol-precipitation method

Synthesis and characterization of mesoporous silica nanoparticles (MSNp) MCM 41 from natural waste rice husk

Synthesis of hydrophilic and hydrophobic xerogels with superior properties using sodium silicate

Synthesis of silica nanoparticles from sodium silicate under alkaline conditions

Synthesis of Mesoporous Silica Materials via Nonsurfactant Urea-Templated Sol-Gel Reactions

Suitability evaluation of selected sand geological formations for synthesis high purity crystalline silica, Iraq

Surfactant-free Synthesis of Mesoporous Silica Materials (Using Tetraetylorthosilicate and Oleic Acid): Preparation, Characterization, and Catalytic Applications