Abstract:The present work considers a shell-and-coil heat exchanger, and the hybrid nanofluid's flow and heat transfer inside the proposed thermal system are numerically evaluated. The coil tube has a conical pattern and is oriented horizontally inside the shell. Three water-based hybrid nanofluids are considered here as heat transfer fluids. A commercial CFD code that uses the finite volume method performs the numerical analysis. The regime of fluid flow is turbulent in both coil and shell sections. The validation analysis of the present numerical model was performed using the experimental results of the reference, and accordingly, the accuracy of the present numerical model was proved. This work includes two sectors. In the first part, the volume concentration of the considered hybrid nanofluid was kept constant, and the influence of the hybrid nanofluid kind on the hydrothermal behaviour of the shell-conical-coil heat exchanger was evaluated numerically. In this section, three hybrid nanofluids, (i) Water/MgO–TiO 2 , (ii) Water/MOS 2 -CuO, and (iii) Water/Ag-HEG, were employed. Also, for all suggested hybrid nanofluids, the volume concentration of both employed nanoparticles are equal to each other, φ 1 = φ 2 . The obtained outcomes depicted that between various considered heat transfer fluids, the Water/MgO–TiO 2 model displayed the most outstanding thermal performance value in all the investigated Dean numbers, and the model Water/MOS 2 -CuO was in second place. Moreover, the maximum thermal performance for the hybrid nanofluid was obtained at φ 1 = φ 2 = 0.7. The Ag-HEG/Water and MgO–TiO 2 /Water hybrid nanofluids have the lowest and maximum thermal performance at the lowest considered Dean number among the evaluated hybrid nanofluids. As a result, the MgO–TiO 2 /Water hybrid nanofluid has roughly 18.95 % higher thermal performance than the Ag-HEG/Water hybrid nanofluid. Furthermore, the MgO–TiO 2 /Water and Ag-HEG/Water hybrid nanofluids have the highest and lowest thermal performance at the highest considered Dean number, respectively. Consequently, the MgO–TiO 2 /Water hybrid nanofluid exhibits approximately 39.22 % higher thermal performance than the Ag-HEG/Water hybrid nanofluid. The MgO–TiO 2 /Water hybrid nanofluid has the highest and lowest thermal performance at the lowest Dean number, with φ 1 = φ 2 = 0.7 and φ 1 = φ 2 = 0.3, respectively. The φ 1 = φ 2 = 0.7 model has a thermal performance that is approximately 39.28 % greater than the φ 1 = φ 2 = 0.3 model at the lowest regarded Dean number. At the highest regarded Dean number, the MgO–TiO 2 /Water hybrid nanofluid with φ 1 = φ 2 = 0.3 exhibits a lower thermal performance than the model φ 1 = φ 2 = 0.7 by about 14.28 %.

CFD Study on Heat Transfer in Hybrid Nanofluid with Coil Controller in Double Tube Heat Exchanger

Property of Water-Nanoparticle Flow and Heat Transfer in the Double-Tube Heat Exchanger with Nanofluid

Numerical investigation of the simultaneous effect of twisted tape and nanofluid hybrid in shell and spiral tube heat exchanger with a special design

CFD analysis on heat and flow characteristics of double helically coiled tube heat exchanger handling MWCNT/water nanofluids

Hydrothermal behaviour of hybrid nanofluid flow in a shell-and conical coil tube heat exchanger; numerical approach

Heat Transfer Enhancement Using Al2O3-MWCNT Hybrid-Nanofluid inside a Tube/Shell Heat Exchanger with Different Tube Shapes

Experimental investigations on heat transfer enhancement in a double pipe heat exchanger using hybrid nanofluids

Analysis of thermal efficiency of a corrugated double-tube heat exchanger with nanofluids

Investigation on the enhancement of heat transfer in counterflow double-pipe heat exchanger using nanofluids

Numerical investigation of MHD mixed convection in an octagonal heat exchanger containing hybrid nanofluid

Experiment on Heat Exchanger Using Innovative Coils and Phase Change Material/MXene Nanofluids

Numerical evaluation of the heat transfer in a shell and corrugated coil tube heat exchanger with three various water‐based nanofluids

Recent Achievements in Heat Transfer Enhancement with Hybrid Nanofluid in Heat Exchangers: A Comprehensive Review

Convective Heat Transfer and Pumping Power Analysis of MWCNT + Fe3O4/Water Hybrid Nanofluid in a Helical Coiled Heat Exchanger with Orthogonal Rib Turbulators

A numerical study of water based nanofluids in shell and tube heat exchanger

Numerical Study of a Heat Exchanger with a Rotating Tube Using Nanofluids under Transitional Flow

Thermal performance enhancement of shell and helical coil heat exchanger using MWCNTs/water nanofluid

Hydrodynamic studies of CNT nanofluids in helical coil heat exchanger

Enhancing Heat Transfer Performance: Nanofluids Application in Helical Microfin Tube Concentric Heat Exchangers

Novel usage of the curved rectangular fin on the heat transfer of a double-pipe heat exchanger with a nanofluid

Intensified Thermal Conductivity and Convective Heat Transfer of Ultrasonically Prepared CuO–Polyaniline Nanocomposite Based Nanofluids in Helical Coil Heat Exchanger