INCREASING THE DURABILITY OF EXTERIOR PARTS OF AGRICULTURAL MACHINERY USING COMPOSITE MATERIALS

V.A. DENISOV,,V.E. SLAVKINA,R.A. ALEHINA,R.M. KASIMOV

DOI: https://doi.org/10.22314/2618-8287-2023-61-4-90-96

2023-01-01

Tekhnicheskiy servis mashin

Abstract:The problem of ensuring the durability of machines is currently extremely relevant, since the aging of the fleet of machines is outpacing the pace of the necessary technical re-equipment. The use of traditional metal materials and outdated technologies in the designs of agricultural machines leads to an increase in the cost of their production, a decrease in resource and durability. The use of corrosion-resistant materials, such as polymer composites, for exterior elements allows to increase the durability of agricultural machinery and reduce corrosion-related damage. (Research purpose) To perform an analytical review of production methods by which it is possible to manufacture exterior parts of agricultural machinery from composite materials. (Materials and methods) It was determined that the material of this study is open information sources; the research method consists in the collection, study and comparative analysis of information. (Results and discussion) It was noted that the following technologies are used for the production of exterior parts of agricultural machinery: vacuum molding, contact molding, pressure impregnation, injection molding. Vacuum forming consists in the production of materials in hot form by the method of exposure to vacuum or low air pressure. Contact molding is a manual layering of reinforcing material and impregnation of each layer with resin. When impregnated under pressure, the fibrous billet is placed in the inner mold, leaving a gap that allows the resin to be injected and the fibers to be impregnated. The essence of injection molding is the forced filling of the working cavity of the metal mold with melt and the formation of the casting, which occurs under the action of the press piston. (Conclusions) Distinctive features of the exterior elements of agricultural machinery are their large overall dimensions and low requirements for the accuracy of shapes and sizes, which determines the scope of technologies possible for their manufacture. The least labor-intensive and simply implemented in a single production method is contact molding. In mass production, the most suitable method is injection molding.