Soil characterization, CBR modeling, and spatial variability analysis for road subgrade: a case study of Danchuwa – Jajere Road, Yobe State, Nigeria
Ibrahim Haruna Umar,Ibrahim Mu'azzam Salisu,Hang Lin,Jubril Izge Hassan
DOI: https://doi.org/10.1088/2631-8695/ad78a5
IF: 1.7
2024-09-10
Engineering Research Express
Abstract:Road construction projects require a thorough understanding of soil properties to ensure the stability and longevity of the infrastructure. This study investigates the suitability of soil materials for a proposed road construction project along a 34 km stretch in Yobe State, Nigeria. The primary objectives are to characterize the soil properties along the proposed road alignment, evaluate their suitability for road construction, and develop a predictive model for estimating the California Bearing Ratio (CBR) based on soil properties. Out of the 34 soil samples analyzed, 30 were classified as A-3(1), and four samples (16, 17, 31, and 32) were classified as A-1(1) according to the AASHTO Soil Classification System. Laboratory tests, including particle size distribution (grading percentages: gravel 0.02-75.34%, sand 15.5-90.88%, fines 8.92-34.84%), Atterberg limits (liquid limits 17-33%, plastic limits 14-27%, plasticity index <12%), specific gravity (2.01 to 2.73), compaction (maximum dry density 1.83-2.19 Mg/m3, optimum moisture content 7.29-14.42%), and CBR tests (values ranging from 5-62%), were conducted. Correlation analyses revealed strong positive relationships between maximum dry density (r = 0.82) and specific gravity (r = 0.89) with CBR values. Cluster analysis segmented the samples into four distinct groups: Cluster 0 (11 samples), Cluster 1 (9 samples), Cluster 2 (5 samples), and Cluster 3 (9 samples). A linear regression model predicted CBR using maximum dry density and specific gravity (mean squared error = 9.82, R2 = 0.92). Based on CBR criteria, 8 out of 34 samples (CBR 20-53%) satisfied subbase requirements, while none met the recommended minimum CBR of 80% for base course materials. The study provides insights into spatial soil variability, highlighting cluster analysis and predictive modeling for optimizing construction planning. While on-site materials are unsuitable for subgrade and subbase layers, alternative materials or ground improvement techniques are recommended for the base course layer to enhance bearing capacity.