Abstract:In this work, several heavy crudes with wide viscosity range from 1200 to 120,000 cP at 15.6 °C were partially upgraded with a specially designed catalyst under CH4 atmosphere. All these reactions were conducted using a batch mode high temperature and high-pressure Parr reactor. This technique was proved to be suitable for the heavy oil feeds with varied properties, confirming its generality for industrial practice. Upgrading under CH4 demonstrated much better performance than that under N2 when the reaction conditions kept the same, confirming the role played by methane on facilitating heavy ends conversion during heavy oil partial upgrading. Furthermore, the effect of methane presence was further investigated through comparing with its N2 counterpart at the similar asphaltene conversion by tuning the reaction time and temperature. Although it is well expected that coke yield and gas yield increased yet liquid yield decreased along with upgrading reaction proceeding, the reaction under CH4 showed noticeably lower coke and gas yield while higher liquid yield than its counterpart under N2 at comparable asphaltene conversion, strongly indicating the methane's effect on effective suppression of thermal over-cracking of heavy crude, which is beneficial for achieving more high value-added liquid products. Moreover, the properties of the oil products derived from different atmospheres including viscosity, density, TAN (total acidic number), AMW (average molecular weight) and sulfur content were studied and compared. All these indexes showed a decreasing trend with increasing asphaltene conversion. The values for viscosity, density and AMW were higher under CH4 than those under N2, while the TAN and sulfur content were lower when methane was present, implying the possible methane incorporation and its role played on promoting deoxygenation and desulfurization reactions. The research outcomes derived from this study further evidence the technical advantages of heavy crude partial upgrading under methane, thus providing a more cost-effective and environmentally friendly alternative to hydrotreating for processing heavy oil.

Catalytic desulfurization of marine gas oil and marine diesel oil under methane environment

Acidity Modification of ZSM-5 for Methane Conversion in Co-feeding Method with MTA Reaction

Methane-assisted catalytic light oil desulfurization: Catalyst design, sulfur product distribution analysis and mechanistic study

Effects of Ga- and P-modified USY-based NiMoS catalysts on ultra-deep hydrodesulfurization for FCC diesels

Catalytic elemental sulfur-assisted methane activation at low temperature

ZSM–5@KIT–6 encapsulated composite molecular sieves for the catalytic cracking of waste cooking oil model compound to produce light olefins

Combined single-pass conversion of methane via oxidative coupling and dehydroaromatization: a combination of La2O3/BaO and Mo/HZSM-5 catalysts

Post-Steam-Treatment of Mo/Hzsm-5 Catalysts: an Alternative and Effective Approach for Enhancing Their Catalytic Performances of Methane Dehydroaromatization

Heteropolyacids supported on micro/mesoporous materials PMoW@HKUST-1@ZSM-5-MCM-41: Effective catalyst for oxidative desulfurization with oxygen

Preparation of MoO 2 /g-C 3 N 4 Composites with a high surface area and its Application in Deep Desulfurization from Model Oil

Effect of methane presence on catalytic heavy oil partial upgrading

Preparation of MoO3/g-C3N4 catalyst and its application in the oxidation desulfurization of model oil

MoO3 Nanobelt-Modified HMCM-49 Zeolite with Enhanced Dispersion of Mo Species and Catalytic Performance for Methane Dehydro-Aromatization

Marine diesel engine SCR denitration catalyst for efficiently removing soot and preparation method of marine diesel engine SCR denitration catalyst

Remarkable Improvement on the Methane Aromatization Reaction: A Highly Selective and Coking-Resistant Catalyst

Synergetic effect of iron and tungsten on molybdenum‐doped HZSM‐5 zeolite in catalytic methane dehydroaromatization

Effect of Co Additive on Formation of Coke Deposits in Methane Dehydro-Aromatization over Mo/HZSM-5 Catalyst

Coupling of Dielectric Barrier Discharge and Cu–S-1 Catalyst for Direct Oxidation of Methane to Methanol

Combined Single-pass Conversion of Methane Via Oxidative Coupling and Dehydro-aromatization

Methane Dehydro-Aromatization over Mo/Hzsm-5 Catalyst Prepared by Different Methods

A Facile and Effective Method for the Distribution of Mo/HZSM-5 Catalyst Active Centers