Abstract:Internet-of-Things (IoT) refers to a high-density network of low-cost low-bitrate terminals and sensors where also low energy consumption is one central feature. As the power-budget of classical receiver chains is dominated by the high-resolution analog-to-digital converters (ADCs), there is a growing interest towards deploying receiver architectures with reduced-bit or even 1-bit ADCs. In this paper, we study waveform design, optimization and detection aspects of multi-user massive MIMO downlink where user terminals adopt very simple 1-bit ADCs with oversampling. In order to achieve spectral efficiency higher than 1 bit/s/Hz per real-dimension, we propose a two-stage precoding, namely a novel quantization precoder followed by maximum-ratio transmission (MRT) or zero-forcing (ZF) type spatial channel precoder which jointly form the multi-user-multiantenna transmit waveform. The quantization precoder outputs are optimized, under appropriate transmitter and receiver filter bandwidth constraints, to provide controlled inter-symbol-interference (ISI) enabling the input symbols to be uniquely detected from 1-bit quantized observations with a low-complexity symbol detector in the absence of noise. An additional optimization constraint is also imposed in the quantization precoder design to increase the robustness against noise and residual inter-user-interference (IUI). The purpose of the spatial channel precoder, in turn, is to suppress the IUI and provide high beamforming gains such that good symbol-error rates (SERs) can be achieved in the presence of noise and interference. Extensive numerical evaluations illustrate that the proposed spatio-temporal precoder based multiantenna waveform design can facilitate good multi-user link performance, despite the extremely simple 1-bit ADCs in the receivers, hence being one possible enabling technology for the future low-complexity IoT networks.

A CP Reduction Scheme Based on Symbol Repetition for Narrow-Band IoT Systems

Reduction of Cyclic Prefix Overhead in Narrow-Band Internet of Things (NB-IoT) Systems

Novel Waveform Design with a Reduced Cyclic Prefix in MIMO Systems

A Novel OFDM Transmission Scheme with Length-Adaptive Cyclic Prefix

Symbiotic Radio with Orthogonal Time Frequency Space Modulation over High-Mobility Channels

OFDM-Standard Compatible SC-NOFS Waveforms for Low-Latency and Jitter-Tolerance Industrial IoT Communications

Mnb-Iot: Concurrent Uplink Transmission for Multiple User Equipments in NB-IoT

Enabling Low-Power OFDM for IoT by Exploiting Asymmetric Clock Rates

A Realization Scheme of Cyclic Prefix Based Symbol Synchronization in OFDM Systems

A Cyclic Prefix-Free OFDM System Based on Iterative Extrapolation: Design and Performance Analysis

Multi-User Multi-IoT-Device Symbiotic Radio: A Novel Massive Access Scheme for Cellular IoT

Narrowband Internet of Things: Repetition-Based Coverage Performance Analysis of Uplink Systems.

Spatio-Temporal Waveform Design for Multi-user Massive MIMO Downlink with 1-bit Receivers

A Spectrum Adaptive NC-CI/OFDM System

An Interference Alignment and ICA-Based Semiblind Dual-User Downlink NOMA System for High-Reliability Low-Latency IoT

Joint Communications and Sensing Employing Optimized MIMO-OFDM Signals

RADB: Random Access with Differentiated Barring for Latency-Constrained Applications in NB-IoT Network

Cognitive Non-Continuous Carrier Interferometry Orthogonal Signal Division Multiplex Transmission In Autonomous Vehicular Communications

Multiple Access Design for Symbiotic Radios: Facilitating Massive IoT Connections with Cellular Networks

A Simplified Equalization Method for Dual PN-Sequence Padding TDS-OFDM Systems

Rate-Splitting Multiple Access for Overloaded Cellular Internet of Things