Abstract:Firefighters' suit is personal protective equipment that can effectively prevent skin burns, and ensure firefighters' safety. Considering the fire environment's non-uniform feature, this study takes both axial and radial heat transfer into account. A device is developed to simulate the closed and open air gap under clothing. Different types and thicknesses of airgaps are measured to compare their thermal protective performance (TPP) on the human body. A 3D heat transfer model is established to reveal the airflow and heat transfer characteristics in the air gap. The results show that the maximum temperature difference on fabric is 166.2 °C under no air gap condition. Multi-layer fabric has a relatively uniform temperature distribution, and its peak temperature of the out shell increased by 140–170 °C compared with single-layer fabric. To quantify the contribution of the air gap to the TPP of the fabric system, the increased rates of second-degree burn time (t 2nd ) with air gaps compared to no air gap condition are calculated. The conditions with air gaps increase t 2nd by 68.7%–137.5%, and the increase rates are greater for open air gaps. According to the airflow pattern, larger convective units merge when the air gap thickness increases to 18 mm, driving heat transfers to the copper sensor. The total heat fluxes of the closed AGs are significantly higher than that of the open conditions (12.1% for 6 mm and 13.9% for 18 mm). Radiation is the main heat transfer mode in the air gap, and its proportion is higher in closed AGs. The findings of this study indicate that designing an appropriate air gap and reducing the radiation heat transfer can significantly increase the safe operating time and improve the occupational safety of firefighters.

Effects of air gap and compression on the dual performance of multilayer thermal protective clothing under low radiant heat

On dual performance of protective clothing composites with different air gaps under hot steam exposure

Effects of Multiple Air Gaps on the Thermal Performance of Firefighter Protective Clothing under Low-Level Heat Exposure

Effects of air gap under clothing on heat transfer from fire environment to human skin: An experimental and numerical study for firefighter safety

Quantitative Investigation of Air Gaps Entrapped in Multilayer Thermal Protective Clothing in Low‐level Radiation at the Moisture Condition

Thermal Insulations of Multilayer Clothing Systems Measured by A Bench Scale Test in Low Level Heat Exposures

THE EFFECT OF AIR GAP THICKNESS ON HEAT TRANSFER IN FIREFIGHTERS' PROTECTIVE CLOTHING UNDER CONDITIONS OF SHORT EXPOSURE TO HEAT

Effect of different hole shape of thermal barrier on the performance for thermal protective clothing

Study on the influence of constructional parameters on performance of outer layer of thermal protective clothing

Investigating the Thermal-Protective Performance of Fire-Retardant Fabrics Considering Garment Aperture Structures Exposed to Flames

Numerical investigation of the effect of clothing air gap distribution and environmental air speed on dry heat transfer underneath clothing

Influences of moisture management performance and continuous sweat rate on heat transfer through firefighting clothing under radiant exposure

Analyzing thermal‐moisture comfort and thermal protective performance of phase change materials dripped protective clothing

Effects of microencapsulated phase change materials on the thermal behavior of multilayer thermal protective clothing

Quantitative Assessment of the Relationship Between Radiant Heat Exposure and Protective Performance of Multilayer Thermal Protective Clothing During Dry and Wet Conditions

A Prediction Method To Evaluate Thermal Performance Of Protective Clothing Based On The Correlation Analysis Of The Bench Scale And Flame Manikin Tests

Personal Cooling Effects on Thermal Comfort of Personnel Wearing Medical Protective Clothing (Mpc)

Impact of Fabric Moisture Transport Properties on Physiological Responses when Wearing Protective Clothing

Analyzing the Transient Thermophysical Properties of Heat-Resistant Fabrics in TPP Exposures

A modified model to assess the thermal protective performance of fire-retardant clothing exposed to both flame and radiant source