Abstract:As side effect of the transformation process, substituting the blast furnace/basic oxygen furnace process by direct reduced iron/electrical smelting processes is that new slag types arise. The article presents test results with respect to chemical, physical, and cementitious slag properties. Modified, quenched, and glassy electric arc furnace slags and submerged arc furnace slags have a high clinker reduction and CO2 reduction potential. The main challenge of the European steel industry for the next decade is the steel production transformation process. Many steel producers aim to avoid their CO2 emissions by substituting the CO2‐intensive blast furnace/basic oxygen furnace route by a gas‐based direct reduced iron (DRI) process combined with an electric smelting process. Thus, the well‐known latent hydraulic granulated blast furnace slag (GBS) will vanish step by step. For more than 140 years, this slag has been used as a supplementary cementitious material due to its clinker reduction potential and from there its CO2 reduction potential for the cement and concrete production. Moreover, slag cements offer some special technical advantages. Whereas the solid‐state DRI process itself does not generate any slag, the different electric smelting processes will produce liquid steel or "electric" pig iron, respectively, together with very different types of slags. However, specific slag/metal ratios, resulting slag volumes, chemical and mineralogical composition, and physical properties of the new slags are yet unknown. Therefore, their cementitious and environmental properties are also still unknown. Different current and scheduled projects aim mainly to enable the different types of new slags to substitute GBS to continue the successful cross‐industrial cooperation between steel and cement industry.

The Steelmaking Transformation Process and Its Consequences for Slag Utilization

Green Transition of the Iron and Steel Industry – Impact on Slags and By‐Products

Valorisation of metallurgical residues via carbothermal reduction: A circular economy approach in the cement and iron and steel industry

Advances in chemical and physical properties of electric arc furnace carbon steel slag by hot stage processing and mineral mixing

An efficient molten steel slag gas quenching process: Integrating carbon solidification and waste heat recovery

Accelerated Carbonation of Steel Slag and Their Valorisation in Cement Products: A Review

Slag, steel and greenhouse gases

Steel slag carbonation in a flow-through reactor system: the role of fluid-flux

The potential use of steel slag in refractory concrete

Carbonation of steelmaking slag presents an opportunity for carbon neutral: A review

Recycling of iron and steel slag for carbon reduction and low‐environment load application

Carbon dioxide sequestration through steel slag carbonation: Review of mechanisms, process parameters, and cleaner upcycling pathways

Carbon mineralization of steel and iron-making slag: Paving the way for a sustainable and carbon-neutral future

Improving the Carbonation of Steel Slags Through Concurrent Wet Milling

Recycling Perspectives of Electric Arc Furnace Slag in the United States: A Review

Generation, utilization, and environmental impact of ladle furnace slag: A minor review

Integration of Modified Solvay Process for Sodium Bicarbonate Synthesis from Saline Brines with Steelmaking for Utilization of Electric Arc Furnace Slag in CO2 Sequestration and Reagent Regeneration

Environmental Characteristics and Utilization Potential of Metallurgical Slag

Green Castable Using Steelmaking Slags: A Sustainable Product for Refractory Applications

Heat Recovery from High Temperature Slags: A Review of Chemical Methods

Progress Toward Biocarbon Utilization in Electric Arc Furnace Steelmaking: Current Status and Future Prospects