Integration of Railway Bridge Structural Health Monitoring into the Internet of Things with a Digital Twin: A Case Study

Alberto Armijo,Diego Zamora-Sánchez
DOI: https://doi.org/10.3390/s24072115
IF: 3.9
2024-03-27
Sensors
Abstract:Structural health monitoring (SHM) is critical for ensuring the safety of infrastructure such as bridges. This article presents a digital twin solution for the SHM of railway bridges using low-cost wireless accelerometers and machine learning (ML). The system architecture combines on-premises edge computing and cloud analytics to enable efficient real-time monitoring and complete storage of relevant time-history datasets. After train crossings, the accelerometers stream raw vibration data, which are processed in the frequency domain and analyzed using machine learning to detect anomalies that indicate potential structural issues. The digital twin approach is demonstrated on an in-service railway bridge for which vibration data were collected over two years under normal operating conditions. By learning allowable ranges for vibration patterns, the digital twin model identifies abnormal spectral peaks that indicate potential changes in structural integrity. The long-term pilot proves that this affordable SHM system can provide automated and real-time warnings of bridge damage and also supports the use of in-house-designed sensors with lower cost and edge computing capabilities such as those used in the demonstration. The successful on-premises–cloud hybrid implementation provides a cost effective and scalable model for expanding monitoring to thousands of railway bridges, democratizing SHM to improve safety by avoiding catastrophic failures.
engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
What problem does this paper attempt to address?
This paper attempts to solve several key problems in the structural health monitoring (SHM) of railway bridges, as follows: 1. **Improve monitoring accuracy and real - time performance**: - Traditional railway bridge inspection methods rely on visual surveys, which are not only resource - intensive and inefficient but also cause interference to daily operations. By introducing an Internet of Things (IoT) - based digital twin framework, the paper aims to provide a method that can achieve real - time monitoring and automated analysis, thereby improving monitoring accuracy and timeliness. 2. **Reduce costs**: - High cost is one of the main obstacles restricting the wide application of complex structure monitoring systems. The paper proposes a solution that combines low - cost wireless accelerometers and edge computing, making large - scale deployment possible and the cost 80% lower than that of traditional wired sensor networks. 3. **Simplify installation and maintenance**: - The installation and maintenance of traditional SHM systems are very complicated. The system proposed in the paper uses self - contained wireless sensors, reducing the installation and maintenance complexity by more than 50% and further reducing the total cost of ownership. 4. **Deal with aging and environmental changes**: - Many railway bridges have exceeded their design life and are facing aging problems. In addition, the uncertainties brought by climate change also increase the risks of these structures. The system proposed in the paper can detect potential structural changes by long - term monitoring of vibration data, helping to prevent catastrophic failures caused by aging or environmental factors. 5. **Achieve intelligent infrastructure management**: - By combining IoT sensing, edge - cloud computing, digital twins and machine learning, the paper establishes a practical and scalable framework for continuous and automated monitoring of the structural integrity of railway bridges. This not only improves safety but also provides a basis for broader intelligent infrastructure management in the future. ### Specific Objectives and Performance Indicators To verify the effectiveness of the proposed hybrid digital twin solution, the paper sets the following specific objectives: - **Classification accuracy**: Achieve an abnormal vibration pattern detection accuracy of ≥95% when only using low - cost wireless sensors. - **Scalability**: Achieve large - scale monitoring across thousands of bridges through cloud and local edge - computing architectures, with a cost 80% lower than that of traditional methods. - **Simplified installation and maintenance**: Reduce the installation and maintenance complexity by more than 50% compared to typical SHM systems, using self - contained wireless sensors and battery/solar power supply. Through these objectives, the paper demonstrates the advantages of the digital twin method in railway infrastructure monitoring, especially in terms of accuracy, economy and practicality. ### Experimental Methods The paper describes in detail a seven - step data - driven process, including bridge characterization, sensor deployment, data pre - processing, unsupervised learning of normal vibration patterns, finite element analysis model calibration, synthetic damage data generation, supervised model training and periodic re - training. This process is applied to an actual railway bridge pilot project, showing how to detect structural changes through digital twins. In conclusion, this paper solves some key challenges in the structural health monitoring of railway bridges through innovative technical means, providing a valuable reference for future intelligent infrastructure management.