Abstract:Due to the growing electric vehicle market and new trends to reduce fuel consumption for a healthy environment, safe and reliable vehicles are desirable for reasons beyond EV and new technology. Although certain safety standards and legislation are in place and continuously improving but several concerns including battery safety, battery performance, vehicle structure, and battery design to be considered as these affect the overall reliability of Electric vehicles (EVs). Lithium-ion battery technology is considered a good solution to power electric vehicles but potential overheating due to stressful conditions such as mechanical abuse, overcharge, over-discharge, short circuit, and excessive heat from external environment gives rise to safety issues and the occurrence of one or more than one of these can lead to thermal runaway. In most cases, an electric short circuit is a necessary but not sufficient condition for the occurrence of thermal runaway after mechanical abuse. Chemistry of the cell, the resistance of separator to heat, size of the fractured part, and rate of heat transfer all play a role in processes leading to a thermal runaway, if the cell has not gone to thermal runaway right away it can still go into a slow process of electrochemical reaction, releasing gases that eventually could lead to a catastrophic event. This abstract investigates the mechanical behaviour of the separator in the LiCoO2/Graphite cylindrical 18650 cells. Internal short circuit (ISC) behaviour, strain rate dependency, and electrochemical status of the cells (i.e. SOC dependency) are studied to understand failure patterns. Furthermore, a simple and effective constitutive model for the separator layer is formed, facilitating further mechanical analysis and numerical simulation of lithium-ion battery study. The occurrence of ISC is investigated by jellyroll deformation where the casing is removed, and quasi-static load is applied. The numerical simulation model is developed to further investigate sequential structural failures and temperature changes. Simulation results showed good accuracy with experimental results and are useful to predict structural failure of cells. The number of failures including electrolyte leakage, change in shape, sudden voltage drop/temperature rise, and gas venting are observed.

Evaluation of Fire Spread and Suppression Techniques in Micro-Mobility Battery Packs

Full-Scale Experimental Study on the Combustion Behavior of Lithium Ion Battery Pack Used for Electric Vehicle

A Detailed Finite Element Model of Internal Short Circuit and Venting During Thermal Runaway in a 32650 Lithium-Ion Battery

Analysis of Internal Short Circuit and Thermal Runaway of Li-Ion Battery Due to Mechanical Abuse

Thermal behaviour and thermal runaway propagation in lithium-ion battery systems – A critical review

In situ extinguishing mechanism and performance of self-portable microcapsule fire extinguishing agent for lithium-ion batteries

Full-scale Fire Suppression Tests to Analyze the Effectiveness of Existing Lithium-ion Battery Fire Response Procedures for Electric Vehicle Fires

A Review of Battery Fires in Electric Vehicles

Fire Tests on E-vehicle Battery Cells and Packs

Experimental Investigation of Thermal Runaway Behavior and Hazards of a 1440 Ah LiFePO4 Battery Pack

Comparative study on the influence of incident heat flux on thermal runaway fire development of large-format lithium-ion batteries

Investigation on the thermal hazards of 18650 lithium ion batteries by fire calorimeter

Experimental study of thermal runaway propagation suppression of lithium-ion battery module in electric vehicle power packs

Experimental and simulation investigation of thermal runaway propagation in lithium-ion battery pack systems

Effects of Trigger Method on Fire Propagation during the Thermal Runaway Process in Li-ion Batteries

Experimental Investigation of Thermal Runaway Behavior and Hazards of a 1440 Ah LiFePO<sub>4</sub> Battery Pack

Full-scale experimental study on suppressing lithium-ion battery pack fires from electric vehicles

Experimental Study of Gas Production and Flame Behavior Induced by the Thermal Runaway of 280 Ah Lithium Iron Phosphate Battery

Energy Dependencies in Li-Ion Cells and Their Influence on the Safety of Electric Motor Vehicles and Other Large Battery Packs