Analysis of the Sand Erosion Effect and Wear Mechanism of Wind Turbine Blade Coating
Jian Wang,Jin Gao,Yong Zhang,Hongmei Cui
DOI: https://doi.org/10.3390/en17020413
IF: 3.2
2024-01-15
Energies
Abstract:The wind–sand climate prevalent in the central and western regions of Inner Mongolia results in significant damage to wind turbine blade coatings due to sand erosion. This not only leads to a decline in power generation but also poses safety risks. This study replicated the wind–sand environment of Alashan and numerically simulated the erosion and wear process of the blade coatings of a 1.5 MW horizontal axis wind turbine under rotational conditions using the DPM model. Additionally, erosion tests were conducted on the operating wind rotor in a wind tunnel. The simulation results demonstrate that sand particle trajectories in the rotating domain are influenced by vortex, incoming wind speed, and sand particle size. For small-sized sand particles, variations in wind speed do not substantially alter the number of particles in contact with the wind turbine blades. However, alterations in the momentum of these particles lead to changes in the impact force on the coating surface. Conversely, the change of wind speed will not only alter the number of large-size sand particles in contact with the wind rotor but also modify the impact force on the coating surface. Furthermore, after impacting the blade, small sand particles continue to move along an approximate helical trajectory with the airflow, while large-size sand particles swiftly rebound. Through statistical analysis of erosion pits on the blade surface after the erosion experiments, it was observed that, in comparison among the leading edge, windward side, trailing edge, and leeward side, the leading edge presents the greatest number of erosion pits, whereas the leeward side has the fewest. Along the spanwise direction, the 0.7R-blade tip segment exhibits the highest count, while the blade root-0.3R section displays the fewest number of pits. The wear morphology of the blade coating was observed from the blade root to tip. The leading edge coating exhibits a range from shallow pits to coating flaking and deeper gouge pits. On the windward side, the coating displays wear patterns varying from tiny cutting pits to cutting marks, and then to gouge pits and coating flaking. Erosion morphology of the trailing edge evolves from only minor scratches to spalling pits, further deepening and enlarging. These research findings provide a basis for the study of zoning-adapted coating materials for wind turbine blades in wind–sand environments.
energy & fuels