Abstract:During the drilling process of complex structural wells such as horizontal wells, the wear, and tear of the drill pipe can lead to its weakened strength, which is one of the important reasons for the damage accidents of the drill pipe. Titanium alloy drill pipes are widely used in major oil fields as a new type of lightweight drill pipe with high fatigue life. To compare the wear performance of titanium alloy drill pipe with wear-resistant zones and traditional S135 steel drill pipe, this article tested and analyzed the chemical composition, hardness, and metallographic structure of these two drill rod materials and established models for these two materials. In the experiment, the wear morphology and wear rate before and after the experiment were analyzed and compared. Finally, based on the experimental results, an in-depth analysis was conducted on the wear mechanism of the drill pipe, and anti-wear measures were proposed. The results show that the hardness of the two materials decreases from the wear-resistant belt to the inner wall, and the microhardness of the S135 drill pipe is about half of that of titanium alloy drill pipe with wear-resistant belt drill pipe; the wear test shows that the wear loss of the S135 drill pipe is 0.1667 g, the wear rate is 0.042 g/h; through measurement, it was found that the wear loss of titanium alloy drill pipe reached 0.0055 g, and the wear rate is 0.0063 g/h. The wear rate of S135 steel drill pipe under the same conditions is 6.7 times that of titanium alloy drill pipe. Through analysis, it is shown that under the same conditions, titanium alloy wear-resistant belts have excellent wear resistance, which can effectively protect the inner matrix and prevent excessive wear of drill pipes. The research results of this article can provide theoretical references for the on-site use of titanium alloy drill pipe and experimental research on drilling tool wear resistance.

Application and research of titanium alloy oil drill pipes

Experimental and theoretical study on the mechanical properties of titanium alloy drill pipe in short radius and long horizontal wells

Study on Dynamic Behavior of a Titanium Alloy Drill Pipe in Complex Wells

Optimal design and nonlinear dynamic characteristics of titanium /steel drill pipe composite drill string for ultra-deep drilling

Comparative Analysis of Friction and Wear Properties of Titanium Alloy Drill Pipe and Steel Drill Pipe

Research Progress on Properties and Application of Titanium Alloy Oil Country Tubular Goods

Performance Test of Weld Zone of Rotary Friction Welding of Titanium Alloy Drill Pipe

Investigation of fracture causes of the titanium alloy drill pipe in ultra-short radius horizontal well drilling

A Review of Research on Improving Wear Resistance of Titanium Alloys

Effect of Impact Force on the Impact-Sliding Wear of Titanium Alloy Drill Pipes against Steel Casings

Recent developments in titanium alloy application in the energy industry

Study on S-N Curve and Fatigue Limit of Drill Pipe in Offshore Short-Radius Sidetracking Process

Study on the wear resistance of micro-arc-oxidised ceramic films on the surface of TC4 titanium alloy oil well tubing in the Ordos Basin

Drilling of titanium alloy (Ti6Al4V) – a review

Investigation of Friction and Erosion Wear Properties of Titanium and Titanium Alloy Pipes

Drill pipe joints fatigue analysis and optimization under special working conditions

Design,Development and Application of TP140V Extra-high Strength Oil Casing for Extra-deep Complex Well Service

Research on drilling performance and tool life improvement methods of titanium alloy ultra-high-speed drilling bits

Corrosion behavior and failure mechanism of V150 drill pipe in HPHT and ultra-deep drilling process

Calculation model and experimental study of the collapse strength of titanium alloy tubing and casing

Study on Experiment of Drilling for Titanium Alloy Ti6Al4V