Abstract:Compliance control is required in the applications of robots for assembling, grinding, polishing and human-robot interface, which needs both position control and force control of robots. The impedance control based on joint torque servo is a promising and practical method to realize compliance control in industrial applications. The performance of a joint torque servo controller is thus crucial to the success of compliance control. However, both nonlinear friction torque of the joint motor and varied dynamics of environmental contact during manipulation increase control difficulty greatly. This paper focuses on the compliance control problem and presents a new joint torque servo controller which is a cascading structure including an inner velocity feedback loop and an outer torque control loop. Due to the high signal-to-noise ratio of the motor velocity, an extended state observer is designed to effectively estimate and compensate for the motor friction torque, varied dynamics of environmental contact and other unknown disturbance. And benefiting from the introduction of the efficient and powerful velocity inner loop, the new torque controller performs very well not only in the rigid but also elastic contact environment. Then a standard PD controller is designed in the outer torque loop to produce the control law. Based on the satisfactory joint torque controller, a simplified impedance control algorithm is designed to achieve the force control. Experiments with three other joint torque controllers on a robot manipulator are conducted to demonstrate the proposed joint torque method and the overall force control framework. These results show the proposed joint torque controller can reduce the steady-state error from 3.07 Nm to 0.21 Nm which indicates the joint actuator friction can be eliminated by more than 99%. And a substantial improvement can also be observed in the experiments of force control based on the new joint torque controller.

Research on Zero Force Control Strategy for Flexible Joints of Industrial Robot Arms

Torque Limitation Control of Industrial Manipulators Based on General Weighted Least Norm Method

Adaptive Control of Vertical Stage of A Robot Arm for Wafer Handling

Force-free Control for the Flexible-Joint Robot in Human-Robot Interaction

A Novel Robotic Motion Control Strategy Based on Improved Fuzzy PID and Feedforward Compensation

Design of a High-torque Robot Joint and Its Control System

On The Method Of Linearizing Dynamic-Model And Solving Forward Dynamic Problems Of Flexible Robots

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

A Novel Impedance Control Based on Equivalent Stiffness for Hydraulic Single-leg Robot

Control of a Soft Robotic Arm Using a Piecewise Universal Joint Model

Interactive Control System of Variable Force Feedback Robot Based on Spring Model

Optimal control of a flexible robot arm

Characterization, modeling and vibration control of a flexible joint for a robotic system

Model-free motion control of continuum robots based on a zeroing neurodynamic approach

Constant Force PID Control for Robotic Manipulator Based on Fuzzy Neural Network Algorithm

Adaptive Prescribed Performance Control of A Flexible-Joint Robotic Manipulator With Dynamic Uncertainties

Joint control of a robotic arm using particle swarm optimization based H2/H∞ robust control on arduino

Robust model-free control for redundant robotic manipulators based on zeroing neural networks activated by nonlinear functions

Compliance Control for Robot Manipulation in Contact with a Varied Environment Based on a New Joint Torque Controller

A systematic design procedure of force controllers for industrial robots

Feed-forward control of elastic-joint industrial robot based on hybrid inverse dynamic model