Abstract:This study focuses on the effects of a hybrid reinforcement consisting of nanosized particles of Palm Sprout Shell Ash (PSSA) and silicon carbide (SiC) on the mechanical and tribological properties of the Al-Cu-Mg alloy. Hybrid reinforced composites with different weight percentages of SiC and PSSA (0:0, 0:4, 1:3, 2:2, and 4:0 wt.%) were prepared using the ultrasonic-assisted bottom-poured stir casting technique. SEM and EDS were used to characterize the hybrid composite made of Al-Cu-Mg alloy. Optical and SEM microstructural analyses demonstrated an even distribution of SiC and PSSA nano-reinforcements within the matrix. EDS analysis revealed SiC and PSSA reinforcement in the matrix. The mechanical properties (tensile, flexural, and impact strength) and wear properties of the composites and alloy were evaluated according to the ASTM standards. The hybrid reinforced composites displayed remarkable results compared with the base alloy. Among all composites, the 2:2 wt.% SIC and PSSA hybrid reinforced composite exhibited a significant enhancement in both tensile strength and flexural strength, with a 29.15% increase in tensile strength and a 27.64% increase in flexural strength. However, the inclusion of these reinforcements led to a declined in ductility and impact strength of the Al-Cu-Mg alloy composite. Maximum reductions in ductility and impact strength were observed in the 0:4 wt.% SiC and PSSA-reinforced composites, with decreases of 47.67% and 3.56%, respectively. For the 2:2 wt.% SiC and PSSA composites, these reductions were 23.64% and 3.16%, respectively. The SEM analysis of the fractured surfaces of the composites tested for the mechanical properties revealed evidence of both ductile and brittle fracture mechanisms in the tensile, flexural, and impact tests. The wear behaviour of the prepared samples was evaluated, and all composites exhibited superior performance compared with the base alloy, demonstrating adhesive and abrasive wear mechanisms and varying coefficients of friction.

Effects of Silicon and Deformation Ratio on the Mechanical Behavior of Nickel Aluminum Bronze (NAB) Alloy

Effect of Al/Ni Ratio on the Microstructure and Properties of Nickel-Aluminum Bronze Alloys

Stress-Strain Characteristics and Electrical Conductivity of Niobium Nanopowder modified Silicon Bronze

Influence of Nickel Percentage on Lattice Structure and Mechanical Strength in Al‐Si Alloy

Effect of Silicon Addition on Friction and Wear Behaviour of High Tensile Brasses

Non-destructive evaluation from deformed aluminum alloy 6063 and silicon carbides black and green reinforced aluminium alloy based composites

Effect of Silicon Micro-Alloying on the Thermal Conductivity, Mechanical Properties and Rheological Properties of the Al–5Ni Cast Alloy

Experimental Investigation and Comparative Analysis of Aluminium Hybrid Metal Matrix Composites Reinforced with Silicon Nitride, Eggshell and Magnesium

Investigation of Microstructure and Mechanical Properties of Hot Worked Nial Bronze Alloy with Different Deformation Degree

Effect of Copper on Tensile and Hardness of Al-Si Alloy in Automotive Application

Corrosion suppression and strengthening of the Al-10Zn alloy by adding silica nanorods

Effect of AlN on the Mechanical and Electrochemical Properties of Aluminum Metal Matrix Composites

Effects of Ferro-Silicon addition, heat-treatment and plastic deformation on corrosion resistance of 6063 Aluminum Alloy

Effect of nickel on the microstructure and mechanical property of die-cast Al–Mg–Si–Mn alloy

Effects of silicon on microstructure, fluidity mechanical properties, and fracture behaviour of Mg-6Alalloy

Experimental investigation on the mechanical performance of the Al2O3 and ZrO2 added Al-Mg-Si alloy for structural applications

The Role of Silicon Morphology in the Electrical Conductivity and Mechanical Properties of As-Cast B319 Aluminum Alloy

A Study On The Effects Of Hybrid (Sic- Pssa) Nano Sized Reinforcement On Mechanical And Tribological Behaviour Of Al Alloy-Based Metal Matrix Composite Produced By Ultrasonic Assisted Stir Casting

Sensitivity analysis of mechanical properties and ductile/brittle behaviors in aluminum‐silicon alloy to loading rate and nano‐particles, considering interaction effects

Effects of Low Nickel Content on Microstructure and High-Temperature Mechanical Properties of Al-7Si-1.5Cu-0.4Mg Aluminum Alloy

Experimental investigation in enhancing the mechanical, wear and corrosion resistance properties of Al6061-SiC-NSA composites fabricated using stir casting process.