Abstract:Ni-Mn-Ga ferromagnetic shape memory alloys (FSMAs) have attracted great attention for more than two decades, due to their large magnetic shape memory effect that originates from the rearrangement of martensitic variants under an external magnetic field. Over the past decade, accumulated knowledge on the properties of Ni-Mn-Ga Heusler alloys has allowed people to foresee the possibility of employing these alloys in device applications. However, the low operating temperatures and high brittleness remain the major drawbacks for the industrial application. Consequently, there has been growing interest in the modification of Ni-Mn-Ga alloys by adding a fourth element to increase transformation temperatures and to improve ductility. A recent study shows that the ductility has been effectively improved in Cu-doped Ni-Mn-Ga alloy under the situation of single phase via strengthening grain boundaries. In addition, the crystal structure, martensitic transformation, magnetic properties, high temperature magnetoplasticity and magnetocaloric effect have been reported in Ni-Mn-Ga-Cu alloys. Experimental results have shown that the martensitic transformation temperature (T-m) is drastically increased and the Curie temperature (T-c) slightly decreased with Cu addition. As already known, the alloying elements affect both the crystal and electronic structures and hence the stability of austenite and martensite phases. Therefore, knowledge of the effects of Cu addition is of great importance to understand the composition dependence of T-m and T-c. First-principles calculation results on Ni8Mn4-xGa4Cux (x=0, 0.5, 1, 1.5 and 2) ferromagnetic shape memory alloys of this research draw following conclusions. The added Cu atom preferentially occupies the Mn site. The formation energy results indicate that ferromagnetic austenite is more stable than the paramagnetic one. The ferromagnetic state becomes instable and paramagnetic state becomes more stable when Mn is gradual substituted by Cu. The evaluated T-c decreases with increasing Cu content that is derived from the decrease of total energy difference between the paramagnetic and the ferromagnetic austenite. The experimentally observed decrease of T-m is originated from the decrease of total energy difference between the austenite and the non-modulated martensite. The difference between the up and down DOS is reduced with the increasing Cu content that gives rise to the decrease of the total magnetic moments. The purpose of this work is to explore the influence of Cu addition on crystal structure, T-m, T-c and electronic structures of Ni8Mn4-xGa4Cux (x=0, 0.5, 1, 1.5 and 2) alloys by first-principles calculations, aiming at providing theoretical data and directions for developing high performance FSMAs.

First-principles study on the enhancement of structure stability and magnetocrystalline anisotropy energy of L10-ordered Mn1−xFexAlC compound for permanent magnet application

Enhancing Stability, Magnetic Anisotropy, and Coercivity of $τ$-L$1_0$ MnAl: Machine Learning, $\textit{Ab Initio}$, and Micromagnetic Modeling

Origin of uniaxial magnetic anisotropy in MnAlCx: A first-principles study

Transformation of in-plane to out-of-plane anisotropy in MnBi alloy for permanent magnet application: a First-principles study

Large magnetic anisotropy in Co-Fe-Ni-N ordered structures: a first-principles study

Nanocrystalline SmCo12 Main-Phase Alloys with V-doping: Structure Stability and Magnetic Performance

First-Principle Calculation on the Effect of Mn and in on the Structural Stability and Magnetic Moment of SmCo7 Alloys

Mn-Induced Thermal Stability of L10 Phase in Fept Magnetic Nanoscale Ribbons

A First-Principles Study on Crystal Structure, Phase Stability and Magnetic Properties of Ni-Mn-Ga-Cu Ferromagnetic Shape Memory Alloys

Study on properties of MnAlC magnetic powder and bulk

Compositionally modulated perpendicular magnetic anisotropy in tetragonal Mn x Al films

Structure and Hard Magnetic Properties of MnAl Alloys with C , B , and / or RE Additions

Development of FeCoMnAl multi-principal element alloys and soft magnetic powder cores with excellent magnetic properties and high temperature magnetic stability

Phase Transitions and Hard Magnetic Properties for Rapidly Solidified Mnal Alloys Doped with C, B, and Rare Earth Elements

Simultaneous tuning of the magnetic anisotropy and thermal stability of [Formula: see text]-phase Fe[Formula: see text]N[Formula: see text]

Suppression of anti-phase boundary defects in Mn-Al-Ti permanent magnets

Large Magnetocaloric Effect and Magnetoresistance in Fe and Co Co‐Doped Ni‐Mn‐Al Heusler Alloys

Integrated ab initio modelling of atomic order and magnetic anisotropy for rare-earth-free magnet design: effects of alloying additions in $\mathrm{L}1_0$ FeNi

Rapid Annealing Optimizing Magnetic Softness and Thermal Stability of Mn-Substituted Fe-Based Nanocrystalline Alloys

Structure and Properties Evolutions for Hard Magnetic MnAl and MnGa Based Alloys Prepared by Melt Spinning or Mechanical Milling

Tailoring the magnetic landscape in Al-doped LaMnO3: An experimental and computational perspective