Abstract:Studying the mechanical properties of argillaceous rocks is of major interest in geoscience. For example, these rocks are important in engineering applications such as being suitable cap-rocks for the geological storage of carbon dioxide and potential host rocks for the storage of nuclear waste. Furthermore, argillaceous rocks are encountered in different natural settings such as accretionary wedges or fault zones. As a result of their sedimentary and diagenetic history clay rich rocks are often characterised by multiscale textural anisotropy and compositional heterogeneity resulting in anisotropic mechanical and hydraulic properties. Here, we studied the anisotropic deformation behaviour of Opalinus Clay, collected from the Mont Terri underground laboratory, which is the envisaged host rock formation for nuclear waste disposal in Switzerland. We used the sandy facies of Opalinus Clay, characterized by an irregular wavy lamination of quartz-rich and carbonate-cemented lenses with clay-rich interlayers. Unconsolidated-cylindrical samples cored at 0&#176;, 45&#176; and 90&#176; to the macroscopically visible bedding were deformed in undrained constant strain rate experiments using a Paterson-type deformation apparatus. For each orientation, tests were performed at dry conditions varying either confining pressure (in the range of 50 - 100 MPa), temperature (25 - 200 &#176;C) or strain rate (1*10-3 - 5*10-6 s-1) to study the influence of testing condition and sample orientation on the deformation behaviour. In addition, we deformed a set of back saturated samples at fixed conditions of 50 MPa, 100 &#176;C and 5*10-4 s-1 to investigate the effect of water content on the material strength. The results show semi-brittle deformation with low yield strength and strain weakening behaviour, in which strain is localized in sub-millimetre to millimetre-wide shear zones at all conditions. Increasing water content reduces, whereas increasing confining pressure increases the peak strength. Samples that were deformed parallel to bedding orientation exhibit the highest strength compared to samples with an orientation of 90&#176; and 45&#176; to bedding. Only for the latter orientations a weak correlation was found between temperature and failure behaviour. The variation of strain rate shows no clear influence for all orientations. Within this test series, there appears to be a potentially greater influence of the porosity on the peak strength for 45&#176; and 90&#176; oriented samples. Clay rich layers seem to have a strong influence on localization and formation of shear zones, in particular for samples oriented at 45&#176; and 90&#176; to bedding. This observation was confirmed by electron microscopy performed on broad ion beam polished surfaces of deformed sample material. Our experiments reveal that water content, sample orientation with respect to bedding and confining pressure are the most important factors influencing the peak strength of the sandy facies of Opalinus Clay, whereas compositional heterogeneity is responsible for the localization behaviour.

Deformational response of a marine silty-clay with varying organic content in the triaxial compression space.

Mechanical Properties of Stabilized Artificial Organic Soil

One-Dimensional Compression Behavior of a Soil with High Organic Matter Content

Deformation Characteristics of Saturated Clay in Three-Dimensional Cyclic Stress State

Deformation Behavior and Seismic Characteristics of Sandy Facies Opalinus Clay During Triaxial Deformation Under Dry and Wet Conditions

Experimental Deformation of Opalinus Clay at Elevated Temperature and Pressure Conditions: Mechanical Properties and the Influence of Rock Fabric

A one-dimensional viscoelastic and viscoplastic constitutive approach to modeling the delayed behavior of clay and organic soils

Effect of Soil Structure on Compression Behavior of Natural Soft Clays

Experimental Deformation of Sandy Opalinus Clay at Elevated Temperature and Pressure Conditions

Compression and Creep Indices of Organic Clayey Soil

Impact response of unsaturated sandy soil under triaxial stress

Effects of Density and Moisture Variation on Dynamic Deformation Properties of Compacted Lateritic Soil

Laboratory Characterization of a Compacted–Unsaturated Silty Sand with Special Attention to Dynamic Behavior

Experimental Study on Unconfined Compressive and Cyclic Behaviors of Mucky Silty Clay with Different Clay Contents

Deformation and Strength Characteristics of Structured Clay under Different Stress Paths

Pore Water Salinity Effect on the Intrinsic Compression Behaviour of Artificial Soft Soils

The Influence of Structure on the Behavior of a Saturated Clayey Loess

Triaxial Tests on Anisotropic Consolidated Methane Hydrate-Bearing Clayey-Silty Sediments of the South China Sea

Experiment on dynamic residual strain of two mucky silty clays with different clay contents

Soil Structure Effects on Deformation, Pore Water Pressure, and Consequences for Air Permeability During Compaction and Subsequent Shearing

Transversely Isotropic Poroelastic Behaviour of the Callovo-Oxfordian Claystone: A Set of Stress-Dependent Parameters