Abstract:Cosmetics are used in practically all walks of life as a means of improving skin and beautifying complexion. In recent years, more and more attention has been paid to the cosmetic safety. In response to the cosmetic safety issue, the accurate measurement of the heavy metals in cosmetics is, therefore, particularly important. NMIs from different countries should establish their chemical metrology traceability system in this area, which includes both measurement methods research and certain CRMs development. It should be noted that because the matrix of many cosmetics is complex and the contents of the heavy metals are relatively low, it still is a challenging task to measure the analytes with high accuracy and precision.CCQM-K106 followed up CCQM pilot study 'CCQM-P128: Pb, As measurements in cosmetic (cream)'coordinated by the National Institute of Metrology, China (NIM) in 2009. The cream was selected as the testing material, which is widely used as a daily skin care worldwide. This is the first CCQM key comparison regarding the measurement of toxic metal elements with the cosmetic matrix, which includes pure water, liquid paraffin, silicone oil, synthetic squalane, hyaluronic acid, glycerin, propylene glycol, allantoin, preservative and so on. The aim of the CCQM-K106 is to demonstrate the capability of participating NMIs and designated institutes in measuring the contents of poisonous elements, including lead, arsenic and mercury in a cosmetic sample (cream), and support CMC claims relating to inorganic elements in cosmetic materials and similar chemical industry products.The cream matrix sample was prepared under the guidance of professional technicians. The formula of the cream was carefully chosen to match with a real cosmetic. The homogeneity and stability level of Pb, As and Hg in the cream sample were fit for the objective of the comparison. Each participant received two numbered bottles containing about 5g samples in each bottle. The instruction relating to CCQM-K106 was sent to each participant by e-mail, which consisted of technical protocol, results report form and inorganic core capabilities tables. The results were reported as mass faction (mg/kg). Calculation of the uncertainty expressed as a combined standard uncertainty and an expanded uncertainty at 95% confidence. In order to allow a sufficient evaluation of the comparison, the report was required to include a detailed description of the applied method of measurement, information about sample digestion and preparation, information about the reference material used for calibration.The methods of measurement were free to be selected by the participants. For the sample treatment, most of the participants used microwave digestion method. For instrumental determination, a variety of techniques such as ICPMS, AAS, INAA were adopted by the participants. Most participants choose ID-ICP-MS method to measure Pb and Hg, which showed the better performance in terms of consistency and reliability of the measurement results.The reference mass fraction values and associated uncertainties were calculated by different statistic ways. As the result, the median and uncertainty of median were proposed as the key comparison reference value (KCRV) and its associated key comparison reference uncertainty after removal of suspected extreme values.In general, the performances of the majority of the CCQM-K106 participants are excellent, illustrating their measurement capability for Pb, As and Hg in a complex greasy matrix.The results can be used further by any participant to support its CMC claim at least for a borate buffer. That claim will concern the pH method employed by the participant during this comparison and will cover the used temperature(s) or the full temperature range between 15 degrees C and 37 degrees C for the participant which measured pH values at the three temperatures.

Final report for CCQM-P212: coherence of carbon isotope delta reference materials

Metrology for stable isotope reference materials: 13C/12C and 18O/16O isotope ratio value assignment of pure carbon dioxide gas samples on the Vienna PeeDee Belemnite-CO2 scale using dual-inlet mass spectrometry

Towards the compatibility of stable isotope data: review of related concepts, recent progress with reference materials and current challenges

Final report on EURAMET key comparison EURAMET.M.D-K2.2 (1523)

Exploring δ 13 C data compatibility in a broad δ 13 C range: Reassembling δ 13 C values obtained for NIST CO 2 RMs 8562–8564 at different laboratories

Final report on EURAMET key comparison EURAMET.M.D-K2.1 (1522)

Final report, ongoing key comparison BIPM.QM-K1, ozone at ambient level, comparison with VSL, April 2024

CCQM-K173.1 - Assay of sodium carbonate. Final report

Final report, ongoing key comparison BIPM.QM-K1, ozone at ambient level, comparison with CMS/ITRI, March 2024

Update of the BIPM comparison BIPM.RI(II)-K1.Co-57 of activity measurements of the radionuclide 57 Co to include the 2023 result of the BEV (Austria)

Final Report of the Key Comparison Ccqm-K106: Pb, As and Hg Measurements in Cosmetic (Cream)

EURAMET Key Comparison EURAMET.M.D-K4.2020: Hydrometer Calibration Comparison from 600 Kg/m3 to 2000 Kg/m3

Final report, ongoing key comparison BIPM.QM-K1, ozone at ambient level, comparison with NMC-A*STAR, July 2022

Detection of Inconsistencies in Isotope Ratios Certified in the Isotopic Primary Standards for Copper, Zinc and Nickel

Re‐determination of R(13C/12C) for Vienna Peedee belemnite (VPDB)

Final report, ongoing key comparison BIPM.QM-K1, ozone at ambient level, comparison with EMPA, June 2023

Final report, ongoing key comparison BIPM.QM-K1, ozone at ambient level, comparison with NIM, Oct 2023

An international laboratory comparison of dissolved organic matter composition by high resolution mass spectrometry: Are we getting the same answer?

Approaches for the production of reference materials with qualitative properties—The new International Standard ISO 33406

Final report, On-going Key Comparison BIPM.QM-K1, Ozone at ambient level, comparison with INRIM, February 2022

Final report for SIM.QM-S12: supplementary comparison for trace elements in natural water