Comparison of the efficiency of organic compounds decomposition in sewage sludge using selected physical, chemical and biological methods

Iwona Zawieja Zawieja

DOI: https://doi.org/10.5004/dwt.2023.29790

IF: 1.1

2023-01-01

Desalination and Water Treatment

Abstract:Sewage sludge, commonly used in the process of municipal wastewater treatment, is characterized by high organic load and therefore is a valuable substrate in the process of methane fermentation. However, their biodegradability may be limited by the presence of microorganisms, which show limited susceptibility to decomposition in anaerobic conditions. The aim of the conducted research was to compare the efficiency of decomposition of organic compounds in excess sludge by various methods before sending the sludge to fermentation. The paper refers to selected physical (ultrasound field, microwave radiation, low-temperature modification up to 100°C, modification with dry ice), chemical (hydrogen peroxide, Fenton’s reagent, peracetic acid) and biological (enzymatic biopreparations) method of sludge disintegration garbage. Excess sludge from a mechanical–biological sewage treatment plant with the use of a highly effective method of removing biogenic substances was used as the research substrate. As a result of the use of selected physical, chemical, and biological methods of sludge disintegration, an increase in potential susceptibility to biodegradation was observed already at the stage of modification, which was confirmed by methane fermentation in the next stage and the biogas yield recorded. The highest process efficiency in terms of biogas production was recorded for sludge modified with the peracetic acid method, that is, 0.85 L/g·VSS, while the lowest increase in unit biogas production was obtained for sludge modified with dry ice 0.44 L/g·VSS.

engineering, chemical,water resources