Abstract:The article discusses a nonlinear deformation-force model of a concrete bar structure with a non-metallic composite reinforcement (NKA-FRP) in the general case of a stressed state, when all four internal force factors from an external load (namely, bending and twisting moments, transverse and longitudinal forces). A sufficiently deep and meaningful analysis of well-known studies on the selected topic is given. It has been established that the proposed nonlinear deformation-force model of a bar structure with FRP in the general case of a stressed state can be practically useful due to the possibility of its application in the design or reinforcement of beams, girders, columns and elements of rosette trusses of rectangular cross-section, which are operated under aggressive environmental conditions. This model can also be used to check the bearing capacity of existing FRP concrete bar structures, which operate not only under the influence of an aggressive environment, but also under conditions of a complex stress-strain state. In the course of the research, an algorithm was developed for determining the bearing capacity of the design section of a concrete rod with FRP under its complex stress state. General physical relations for the design section are given in the form of a stiffness matrix. The algorithm for calculating a concrete bar with FRP consists of a block for inputting the initial data, the main part, auxiliary subroutines for checking the conditions for increasing the load vector and depletion of the bearing capacity, as well as a block for printing the calculation results. At each stage of a simple static stepwise increasing load, the calculation is carried out by performing a certain number of iterations until the accuracy of determining all components of the deformation vector satisfies a certain predetermined value. The features and patterns of changes in normal and tangential stresses, generalized linear and angular deformations, as well as the equations of equilibrium of a concrete bar with FRP, which operates under the influence of an aggressive environment under conditions of a complex stress state, are also considered.

PARAMETRIC RESEARCH OF RESTRAINED STRAINS AND STRESSES OF SELF-STRESSED FIBER-REINFORCED CONCRETE AT THE STAGE OF EXPANSION

THE RESTRAINED EXPANSION STRAINS OF SELF-STRESSED CONCRETE WITH DISPERSE REINFORCEMENT PART 1. MODELING

Analysis-oriented Stress–strain Models for FRP–confined Concrete

Path-Dependent Stress–Strain Model for FRP-Confined Recycled Brick Aggregate Concrete

Mechanical Properties of SFRC: Database Construction and Model Prediction

Stress-Strain Behaviour Of Frp-Confined Concrete Subjected To Eccentric Compression

STRESS-STRAIN STATE OF BENT REINFORCED CONCRETE ELEMENTS OF CONTINUOUS AND COMPOSITE CROSS-SECTION BASED ON A REFINED NONLINEAR CALCULATION METHOD

Modeling and Model Verification of the Stress-Strain State of Reinforced Polymer Concrete

STRESS-STRAIN RELATION OF FRP-CONFINED CONCRETE

Analytical Prediction and Experimental Research on Shrinkage Cracking of Restrained Early-Age Concrete

NONLINEAR DEFORMATION-FORCE MODEL OF A CONCRETE BAR WITH NON-METALLIC COMPOSITE REINFORCEMENT IN THE GENERAL CASE OF A STRESSED STATE

Compressive properties and analytical modelling for stress-strain curves of polyvinyl alcohol fiber reinforced concrete

RESEARCH ON STRESS-STRAIN RELATION OF CONCRETE CONFINED WITH FRP TUBES

A stress-path dependent stress-strain model for FRP-confined concrete

RESEARCH OF THE STRESS-STRAIN STATE OF PRECAST REINFORCED CONCRETE HOLLOW CORE SLABS UNDER THE ACTION OF A CONCENTRATED AND UNIFORMLY DISTRIBUTED LOAD

Prediction of Stress–Strain Curves for HFRP Composite Confined Brick Aggregate Concrete under Axial Load

A new impact dynamic constitutive relation of steel fiber reinforced concrete and the determination of material parameters

A Study of Strain-Rate Effect and Fiber Reinforcement Effect on Dynamic Behavior of Steel Fiber-Reinforced Concrete

Design-oriented Stress-Strain Model for FRP-confined Ultra-High Performance Concrete (UHPC)

Cross-Sectional Unification on the Stress-Strain Model of Concrete Subjected to High Passive Confinement by Fiber-Reinforced Polymer

Stress-strain behavior of polyethylene terephthalate fiber-reinforced polymer-confined normal-, high- and ultra high-strength concrete