Abstract:Underwater docking greatly facilitates and extends operation of an autonomous underwater vehicle (AUV) without the support of a surface vessel. Robust and accurate control is critically important for docking an AUV into a small underwater funnel-type dock station. In this paper, a docking system with an under-actuated AUV is presented, with special attention paid to control algorithm design and implementation. For an under-actuated AUV, the cross-track error can be controlled only via vehicle heading modulation, so both the cross-track error and heading error have to be constrained to achieve successful docking operations, while the control problem can be even more complicated in practical scenarios with the presence of unknown ocean currents. To cope with the above issues, a control scheme of a three-hierarchy structure of control loops is developed, which has been embedded with online current estimator/compensator and effective control parameter tuning. The current estimator can evaluate both horizontal and vertical current velocity components, based only on the measurement of AUV’s velocity relative to the ground; in contrast, most existing methods use the measurements of both AUV’s velocities respectively relative to the ground and the water column. In addition to numerical simulation, the proposed docking scheme is fully implemented in a prototype AUV using MOOS-IvP architecture. Simulation results show that the current estimator/compensator works well even in the presence of lateral current disturbance. Finally, a series of sea trials are conducted to validate the current estimator/compensator and the whole docking system. The sea trial results show that our control methods can drive the AUV into the dock station effectively and robustly.

Vision-Based Underwater Inspection with Portable Autonomous Underwater Vehicle: Development, Control, and Evaluation

Terminal Underwater Docking of an Autonomous Underwater Vehicle Using One Camera and One Light

Underwater Docking of an Under-Actuated Autonomous Underwater Vehicle: System Design and Control Implementation

Terminal navigation and control for docking an underactuated autonomous underwater vehicle

A Low Cost Visual Positioning System for Small Scale Tracking Experiments on Underwater Vehicles

TJ-FlyingFish: an Unmanned Morphable Aerial-Aquatic Vehicle System

Development of an Autonomous Underwater Vehicle for Water Tunnel Inspection

Design of Autonomous Underwater Vehicle (AUV) Control Unit

Design and Simulation of High Altitude Air-Launched Automatic Underwater Vehicles

Design of an Autonomous Underwater Vehicle Robot Based on Multi-Thrusters and Attitude Fusion.

Development of AUV Mechatronics Integration for Underwater Intervention Tasks

A Hovering Micro Autonomous Underwater Vehicle with Integrated Control and Positioning System

Vision-Based Dynamic Positioning System Design and Experiment for an Underwater Vehicle

Design and Implementation of Lightweight AUV with Multisensor Aided for Underwater Intervention Tasks

Dynamics Modeling and Motion Control of an New Unmanned Underwater Vehicle

Dynamics Modeling and Control Simulation of an Autonomous Underwater Vehicle

Modeling and Simulated Control of an under Actuated Autonomous Underwater Vehicle

Closeup exploration of the seafloor with an autonomous underwater helicopter

Vision-based Environment Perception and Autonomous Obstacle Avoidance for Unmanned Underwater Vehicle

Underwater Target Following with a Vision-Based Autonomous Robotic Fish

On the modification of the SPARUS II AUV for close range imaging survey platform