DIGITAL TWIN IN SIMULATION ENVIRONMENT MARS

V.M. Dmitriev,L.A. Gembuh,A.E. Sakhabutdinov,,,
DOI: https://doi.org/10.14529/ctcr230403
2023-01-01
Abstract:The article considers a technique for constructing a digital twin to simulate the aging processes of electrical circuit components and associated gradual equipment failures. This twin is created by means of I/O boards connected to the STM 32 microcontroller. This allows you to transfer some analog signal from the object and digitize it in the microcontroller, which is then transferred to a computer running the MARS simulation environment on it. The other channel implements the same signals, but from the computer model of the object and further, the signals from the computer model and from the real object are compared using a comparator, and then visualized using a virtual oscilloscope. The hardware-software implementation of the digital twin is given. Goal: implement a digital twin of a rectifier with a filter in the MARS simulation environment. Methods. To implement a digital twin, it is necessary to assemble an electrical circuit of a real object, as well as assemble a virtual circuit based on the components of the MARS simulation environment. Then it is necessary to simulate the degradation of the parameters of a real object by lowering the capacitance of the capacitor. Comparison of voltage signals obtained from a real object and a virtual model is carried out by comparing the ripple coefficients. By the difference in ripple coefficients, determine whether the deviation of the voltage on the capacitor of the real object from the voltage on the capacitor of the virtual object is within the specified allowable range. Results. An electrical circuit of a rectifier with a filter has been assembled. A virtual circuit of a rectifier with a filter has been implemented in the MARS simulation environment. An experiment simulating the degradation of the parameters of a real object was carried out. The results obtained are visualized using a virtual oscilloscope. The pulsation coefficients and their difference are calculated. Conclusion. The experiment showed that the digital twin copes with its task, namely, the detection of a strong deviation of the given parameters from the norm.
What problem does this paper attempt to address?