Abstract:Visual inspections of aircraft exterior surfaces are required in aircraft maintenance routines for identifying possible defects such as dents, cracks, leaking, broken or missing parts, etc. This process is time-consuming and is also prone to error if performed manually. Therefore, it has become a trend to use mobile robots equipped with visual sensors to perform automated inspections. For such a robotic inspection, a digital model of the aircraft is usually required for planning the robot’s path, but a CAD model of the entire aircraft is usually inaccessible to most maintenance shops. It is very labor-intensive and time-consuming to generate an accurate digital model of an aircraft, or even a large portion of it, because the scanning work still must be performed manually or by a manually controlled robotic system. This paper presents a two-stage approach of automating aircraft scanning with an unmanned aerial vehicle (UAV) or autonomous drone equipped with a red–green–blue and depth (RGB-D) camera for detailed inspection or for reconstructing a digital replica of the aircraft when its original CAD model is unavailable. In the first stage, the UAV–camera system follows a predefined path far from the aircraft surface (for safety) to quickly scan the aircraft and generate a coarse model of the aircraft. Then, an optimal scanning path (much closer to the surface) in the sense of the shortest flying distance for full coverage is computed based on the coarse model. In the second stage, the UAV–camera system follows the computed path to closely inspect the surface for possible defects or scan the surface for generating a dense and precise model of the aircraft. We solved the coverage path planning (CPP) problem for the aircraft inspection or scanning using a Monte Carlo tree search (MCTS) algorithm. We also implemented the max–min ant system (MMAS) strategy to demonstrate the effectiveness of our approach. We carried out a digital experiment and the results showed that our approach can scan 70% of the aircraft surface within one hour, which is much more efficient than manual scanning.

Unmanned Aerial Vehicle-Based Automated Path Generation of Rollers for Smart Construction

A Novel Vectorized Curved Road Representation Based Aerial Guided Unmanned Vehicle Trajectory Planning

An Optimal Path-planning Algorithm for Unmanned Rollers with Constraints on Roller Attitude

Accelerated Earth-Rockfill Dam Compaction by Collaborative Operation of Unmanned Roller Fleet

REAL: Rapid Exploration with Active Loop-Closing toward Large-Scale 3D Mapping using UAVs

Multirotor UAV-Based Photogrammetric Mapping for Road Design

SMART SKY EYE System for Preliminary Structural Safety Assessment of Buildings Using Unmanned Aerial Vehicles

Unmanned Aerial Vehicle (UAV)-Assisted Path Planning for Unmanned Ground Vehicles (UGVs) via Disciplined Convex-Concave Programming

An Online Optimization Algorithm for Path Planning of Unmanned Rollers for Compaction of Dams

Unmanned aircraft path planning for construction safety inspections

Towards UAVs in Construction: Advancements, Challenges, and Future Directions for Monitoring and Inspection

Drone-Aided Path Planning for Unmanned Ground Vehicle Rapid Traversing Obstacle Area

Automating Aircraft Scanning for Inspection or 3D Model Creation with a UAV and Optimal Path Planning

Multi-Drone Collaborative Trajectory Optimization for Large-Scale Aerial 3D Scanning

A Computational Model for Simulating the Performance of UAS-Based Construction Safety Inspection through a System Approach

Robust digital-twin airspace discretization and trajectory optimization for autonomous unmanned aerial vehicles

A Practical Methodology for Generating High-Resolution 3D Models of Open-Pit Slopes Using UAVs: Flight Path Planning and Optimization

Unmanned Aerial Vehicle (UAV) path planning and control assisted by Augmented Reality (AR): the case of indoor drones

A hierarchical multi-UAV cooperative framework for infrastructure inspection and reconstruction

A vision-based autonomous UAV inspection framework for unknown tunnel construction sites with dynamic obstacles

Aerial path planning for online real-time exploration and offline high-quality reconstruction of large-scale urban scenes