Abstract:Additive manufacturing (AM) defects present significant challenges in fiber-reinforced thermoplastic composites (FRTPCs), directly impacting both their structural and non-structural performance. In structures produced through material extrusion-based AM, specifically fused filament fabrication (FFF), the layer-by-layer deposition can introduce defects such as porosity (up to 10–15% in some cases), delamination, voids, fiber misalignment, and incomplete fusion between layers. These defects compromise mechanical properties, leading to reduction of up to 30% in tensile strength and, in some cases, up to 20% in fatigue life, severely diminishing the composite's overall performance and structural integrity. Conventional non-destructive testing (NDT) techniques often struggle to detect such multi-scale defects efficiently, especially when resolution, penetration depth, or material heterogeneity pose challenges. This review critically examines manufacturing defects in FRTPCs, classifying FFF-induced defects based on morphology, location, and size. Advanced NDT techniques, such as micro-computed tomography (micro-CT), which is capable of detecting voids smaller than 10 μm, and structural health monitoring (SHM) systems integrated with self-sensing fibers, are discussed. The role of machine-learning (ML) algorithms in enhancing the sensitivity and reliability of NDT methods is also highlighted, showing that ML integration can improve defect detection by up to 25–30% compared to traditional NDT techniques. Finally, the potential of self-reporting FRTPCs, equipped with continuous fibers for real-time defect detection and in situ SHM, is investigated. By integrating ML-enhanced NDT with self-reporting FRTPCs, the accuracy and efficiency of defect detection can be significantly improved, fostering broader adoption of AM in aerospace applications by enabling the production of more reliable, defect-minimized FRTPC components.

Comparison of In-situ Nondestructive Testing and Ex-situ Methods in Additive Manufactured Specimens for Internal Feature Detection

Investigation of the Effect of Artificial Internal Defects on the Tensile Behavior of Laser Powder Bed Fusion 17–4 Stainless Steel Samples: Simultaneous Tensile Testing and X-Ray Computed Tomography

Experimental Study of the Process Failure Diagnosis in Additive Manufacturing Based on Acoustic Emission

Comparison of Digital Radiography and Computed Tomography as Nondestructive Testing Techniques for the Assessment of Lack of Fusion Defects in Additively Manufactured SS316L Coupon

Additive manufacturing process monitoring and control by non-destructive testing techniques: challenges and in-process monitoring

Applications of non-destructive testing techniques for post-process control of additively manufactured parts

In-Situ Monitoring for Defect Identification in Nickel Alloy Complex Geometries Fabricated by L-PBF Additive Manufacturing

In situ real time defect detection of 3D printed parts

Efficient volumetric non-destructive testing methods for additively manufactured parts

Quality assessment of SUS316L fabricated by metal additive manufacturing with eddy current inspection

Assisted defect detection by in-process monitoring of additive manufacturing using optical imaging and infrared thermography

Eddy Current Testing of Artificial Defects in 316L Stainless Steel Samples Made by Additive Manufacturing Technology

Real-Time Nondestructive Evaluation of Additive Manufacturing Using a Laser Vibrometer and Shock Tube

Advances in Online Detection Technology for Laser Additive Manufacturing: A Review

A Preliminary Study Of In-Situ Defects Measurement For Additive Manufacturing Based On Multi-Spectrum

Detecting Multi-Scale Defects in Material Extrusion Additive Manufacturing of Fiber-Reinforced Thermoplastic Composites: A Review of Challenges and Advanced Non-Destructive Testing Techniques

Research Progress on Ultrasonic Nondestructive Testing Technology for Metallic Additive Manufacturing Components: A Review

Nano-Additive Manufacturing and Non-Destructive Testing of Nanocomposites

Review of In Situ Detection and Ex Situ Characterization of Porosity in Laser Powder Bed Fusion Metal Additive Manufacturing

Immersion Ultrasonic Testing of Artificially Induced Defects in Fused Filament Fabricated Steel 316L

A Review of Non-Destructive Testing (NDT) Techniques for Defect Detection: Application to Fusion Welding and Future Wire Arc Additive Manufacturing Processes