Economic Feasibility Study of Syngas-Derived Garden Waste Biomass as Liquified Petroleum Gas Substitute in Indonesia: A Case Study for 1-Megawatt Updraft Fixed Bed Gasifier

Nina Konitat Supriatna,Aminuddin,Agus Kismanto,Ibrahim Purawiardi,Rizal Alamsyah,Nurry Widya Hesty,Prima Zuldian,Oni Fariza,Alfonsus Agus Raksodewanto,Adi Surjosatyo

DOI: https://doi.org/10.5109/7151733

2023-09-01

Evergreen

Abstract:Online Public Access Catalog

What problem does this paper attempt to address?

Economics of Distributed Power Generation via Gasification of Biomass and Municipal Solid Waste

Natarianto Indrawan,Betty Simkins,Ajay Kumar,Raymond L. Huhnke

DOI: https://doi.org/10.3390/en13143703

IF: 3.2

2020-07-18

Energies

Abstract:More than one billion people worldwide still lack access to electricity. Rural electrification via gasification has the potential to satisfy electricity access and demand. This study conducts an economic evaluation of rural electrification through gasification of biomass and municipal solid waste (MSW) using a 60 kW downdraft gasifier, developed at Oklahoma State University. The effects of feedstock cost, electricity selling price, feed-in-tariff, tipping fee, tax rate, and the output power are evaluated using major financial parameters: the net present value, internal rate of return, modified internal rate of return, simple payback period, and discounted payback period, and sensitivity analysis. Results show that the downdraft gasification power system offers a payback period of 7.7 years, while generating an internal rate of return, modified internal rate of return, and net present value of 10.9%, 7.7%, and $84,550, respectively. Results from a sensitivity analysis indicate that the feed-in-tariff has the greatest positive contribution to the project’s net present value. Using MSW, the gasification power system potentially reduces carbon dioxide, nitrogen oxides, and sulfur dioxide emissions as compared to direct combustion and landfill. The technology provides a promising future for rural electrification utilizing biomass and MSW whilst offering economic and environmental benefits for local communities.

energy & fuels
Feasibility Study for Blended Gas Fuel Combustion in Boilers of Thermal Power Plant

ZHANG Lu-jun,LI Jiang-rong,FANG Lei,LI Jian

DOI: https://doi.org/10.3969/j.issn.1007-1881.2010.10.010

2010-01-01

Abstract:The reasonable application of gas fuel,especially the combustible industrial waste gas can reduce the production cost and operation pressure of thermal power companies.This paper introduces the application range of gas fuel,use measures and difficulties in application,put forwards the proposals of the application and promotion of gas fuel and offers a reference for its application to thermal power units.
Micro-Grid Oil Palm Plantation Waste Gasification Power Plant in Indonesia: Techno-Economic and Socio-Environmental Analysis

Jaka Isgiyarta,Bambang Sudarmanta,Jalu Aji Prakoso,Eka Nur Jannah,Arif Rahman Saleh

DOI: https://doi.org/10.3390/en15051782

IF: 3.2

2022-02-28

Energies

Abstract:The utilization of new and renewable energy sources explicitly based on biomass needs to be increased to reduce dependence on fossil fuels. One of the potential biomasses of plantation waste in Indonesia that can be utilized is oil palm plantation waste in the form of fronds and trunks that are converted with multi-stage downdraft gasification technology. This study aimed to conduct a technical analysis, economic analysis, investment risk analysis, social analysis, and an environmental impact assessment of power plants fueled by oil palm plantation waste. The method used was the upscaling of a prototype of a 10 kW power plant to 100 kW. The results showed that it was technically and economically feasible to apply. The economic indicators were a positive NPV of USD 48.846 with an IRR of 9.72% and a B/C ratio of 1.16. The risk analysis predicted a probability of an NPV 49.94% above the base case. The study of the social aspects suggested that the construction of power plants has a positive impact in the form of increased community income and the growth of new economic sectors that utilize electricity as a primary source. An analysis of the environmental effects is critical so that the impacts can be minimized. Overall, the construction of small-scale power plants in oil palm plantations is worth considering as long as it is carried out following the applicable regulations.

energy & fuels
Gasification and Techno-Economic Study of Palm Shell Biomass and the Utilization of Dual Fuel Diesel Engine Operated Diesel Engine

Hasman Hasan Suli,Bambang Sudarmanta

DOI: https://doi.org/10.47467/edu.v4i2.4323

2024-07-28

Abstract:Indonesia's oil reserves and production are steadily declining, accompanied by increasing fossil fuel consumption, particularly in Diesel Power Plants, which contribute to environmental impacts and exacerbate global warming. In response, the government issued a policy in 2028 to implement carbon emission trading for Diesel Power Plants with a capacity below 2 MW, as part of Indonesia's commitment to achieving Net Zero Emission (NZE) by 2060. Considering the significant state assets in the form of diesel-powered generators (approximately 5,200 diesel power plants) still operating throughout Indonesia, the government has also issued policies and strategic plans to develop Biomass Power Plants. This research focuses on examining the combination of biosolar B35 and syngas usage in diesel engines, known as dual fuel engine technology, utilizing abundant palm shell biomass waste in Southeast Sulawesi. The gasification process to create syngas uses a multi-stage downdraft gasifier system with the optimal air ratio variation from previous research, namely 1:7:2 in the pyrolysis, oxidation, and reduction zones. Testing is conducted on a diesel engine at 3000 rpm with load variations ranging from 500 Watt to 4500 Watt. The load is gradually increased at 500-Watt intervals. The syngas mass flow rate is also varied by adjusting four different syngas valve openings to the diesel engine's intake manifold. This study will compare the results of diesel engine operation using single fuel (biosolar B35) with dual fuel (biosolar B35 + syngas) at each engine load interval to determine engine performance, biosolar B35 fuel substitution or savings, carbon reduction in the dual fuel diesel system, and calculate the techno-economics for up-scaling on a 250 kW capacity engine at PT Nusantara Power, Unit Pembangkitan Kendari, ULPLTD Kolaka, Southeast Sulawesi. The aim is to support government programs and policies in realizing environmentally friendly and sustainable Diesel Power Plants, as well as to open opportunities for developing biomass-based dual fuel engine technology in Indonesia.
Unlocking the techno-economic potential of biomass gasification for power generation: Comparative analysis across diverse plant capacities

Nursyuhada' Kamaruzaman,Yasuki Kansha,Ali Abbas,Norhuda Abdul Manaf

DOI: https://doi.org/10.1016/j.wasman.2024.08.020

2024-08-29

Abstract:This research aims to evaluate the techno-economic viability and commercial potential of biomass gasification across different capacities. Sensitivity analysis was conducted based on an established downdraft gasifier model using Aspen Plus. Results underscored the significant impact of gasification temperature and equivalence ratio (ER) on syngas composition, low heating value (LHV), and cold gas efficiency (CGE). Among the feedstocks tested, coconut shell emerged as a feasible feedstock, yielding syngas with an LHV of 8.93 MJ/Nm3 and achieving a CGE of up to 71.12 %. Optimal gasification temperatures ranged between 750 °C to 1,000 °C, with peak ER falling within 0.1 to 0.3. Economic analysis revealed that smaller-scale operations like Plant A resulted in a negative net present value of - US$0.63 million, indicating unfavorable investments. The internal rate of return notably increased from 9.53 % for Plant B compared to -2.56 % for Plant A (20 kW). Plant D, with larger capacity of 20 MW, showed an impressive payback period of less than two years (1.69 years). Medium to large-scale plants such as Plant C (2 MW) and Plant D demonstrated greater economic resilience, with Plant D achieving a significantly lower levelized cost of electricity of US$ 0.19/kWh compared to Plant A at US$ 0.86/kWh. It was noted that the impact of capital costs, operating expenses, and revenue variations is less pronounced at larger scales. The findings from this study shed light on the feasibility of biomass gasification for power generation as a viable option, thereby unlocking the potential for its large-scale commercialization.
Plasma Gasification With Municipal Solid Waste As A Method Of Energy Self Sustained For Better Urban Built Environment: Modeling and Simulation

P A Sesotyo,M Nur,J E Suseno

DOI: https://doi.org/10.1088/1755-1315/396/1/012002

2019-11-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract The plasma gasification method is known as a new technology to produce hydrogen from MSW as a fuel for power generation. Recently, it has become a crucial issue due to the rapid increasing amount of waste, along with the increasingly national population in Indonesia. The goal of waste management is as a material recovery (MR), as an energy recovery (ER) and minimizing the environment impact. The plasma gasification modeling was developed based on plasma torch technology to estimate the syngas composition and energy potential. The process simulation is optimized for mixed steam and air as a gasifying agent. This study is to obtain the essential parameter to have the better content of H2 in the syngas, better plant efficiency and lowest CO 2 emission for developing urban built environment with lesser greenhouse gases (GHG). Result shows that, the ratio of Steam to Waste: 0.08 %, the air mass flow rate: 1.11*10 −3 kg/s and the steam mass flow rate: 01.11*10 −4 kg/s gain the highest molar fraction of H 2 : 32.09%, Syngas Yield : 1.28 Nm 3 /kg, Carbon Conversion Efficiency : 5.83%, Cold Gasification Efficiency : 77.96% and the CO 2 emission : 2.23*10 −4 kg/s.
Kajian Tekno “Waste to Electric” dengan Bahan Baku Pelet Woodchip Memalalui Gasifikasi Multi Stage pada Mesin Diesel Dual Fuel

Hasanuddin,Bambang Sudarmanta

DOI: https://doi.org/10.47467/edu.v4i2.4318

2024-07-28

Abstract:Global warming and climate change have significant impacts on various sectors, including water scarcity, climate changes, social vulnerabilities, ecological damage, infrastructure damage, economic damage, health risks, air quality issues, biodiversity loss, and air quality. As of the end of 2023, Indonesia has power plants with a total capacity of 83.8 GW, comprising 79.8 GW of on-grid plants and 3.95 GW of off-grid plants. This figure indicates an increase in power plants of nearly 1.7 times over the past 10 years. Power generation is still dominated by coal, which constitutes up to half of the total national capacity, followed by gas energy at about 25%. Meanwhile, renewable energy-based power plants make up only 15%, having increased by just around 6 GW in the last 10 years. The utilization of renewable energy in power generation is dominated by hydro power (58%), geothermal (20%), and biomass (18%). In line with the government’s plan to decarbonize and achieve the Net Zero Emissions target by 2060, the 2021-2030 RUPTL (Long-Term Electricity Supply Plan) is designed to be the greenest RUPTL, with the Environmental Friendly Power Generation Plan or New Renewable Energy (EBT) reaching 52% of the total additional power plant capacity. One source of EBT power generation is biomass, derived from wood waste or the use of HTI (Industrial Timber Estate) wood processed into syngas through a gasification process for further conversion into environmentally friendly energy. Gasification is the process of converting woodchips as the raw material in a three-stage gasification process to produce syngas as fuel for diesel engines. During the gasification process, variations in the air ratio will be managed in the pyrolysis, oxidation, and reduction zones with air ratio settings of 0:10:0, 1:8:1, 2:7:1, and 1:7:2. The syngas produced from this process will be used as fuel for diesel engines with a dual fuel system. The characterization of the performance of the dual fuel diesel engine will be conducted by testing the engine at 5000 rpm with load variations from 500 watts to 5000 watts in 500-watt increments and varying the syngas mass flow rate by adjusting the syngas valve opening to the diesel engine. The objective of this research is to determine that gasification of woodchips into syngas can be a promising potential source of renewable, environmentally friendly electrical energy and an alternative to support government programs through the decarbonization of diesel engines.
Zero-Waste Bioenergy to Lower Energy Transition Risks in Indonesia — A Circular Economy Practice on Methane Capture in Biogas Production from POME

Arnita Rishanty,Maxensius Tri Sambodo,Mesnan Silalahi,Erliza Hambali

DOI: https://doi.org/10.1007/s12155-024-10754-3

2024-04-18

BioEnergy Research

Abstract:Driven by the urgent need to address climate change, Indonesia, as the world's largest palm oil producer, faces the challenge of ensuring the sustainability of this industry. This study addresses a critical gap in knowledge by examining the technological advancements in methane capture for bioenergy from palm oil mill effluent (POME), exploring business development applications, and assessing the potential role of methane capture in advancing Indonesia's Enhanced Nationally Determined Contribution (NDC) targets. Employing both quantitative and qualitative methodologies, the study reveals three key findings. Firstly, a systematic literature review highlights a dearth of research on the social and economic aspects of utilizing biomethane gas, particularly in modeling contexts. Secondly, through case studies, the utilization of methane gas as an energy source is shown to significantly reduce electricity expenditures, diminish reliance on fossil fuels, mitigate carbon emissions, and expand access to clean energy for both companies and households. Thirdly, the scenario of converting POME waste into energy can help to reach the target on carbon emissions, but it depends on the level of waste utilization and capacity factor. By repurposing palm oil industry waste for clean energy production instead of expanding land use, which poses risks to biodiversity, Indonesia can mitigate the challenges of the energy transition and foster a more sustainable future.

energy & fuels,environmental sciences
Domestic waste briquetting as refuse-derived-fuel for power plant alternative energy (case study: Bali Province)

I M W Widyarsana,D Saraswati

DOI: https://doi.org/10.1088/1755-1315/1098/1/012080

2022-11-17

IOP Conference Series: Earth and Environmental Science

Abstract:Mobilization and population growth caused waste generation and energy supply increments. It requires more efficient waste management and treatment methods. On the other side, the availability of fossil fuel resources decreased, it urges alternative energy sources to take place. One of the waste-to-energy implementations is using domestic waste into briquettes as refuse-derived fuel (RDF) for gasification fuel as the solutions to overcome this problem. Bali Province is one of the targets of the government's acceleration program for the construction of waste processing plants into electric energy based on Presidential Regulation 35/2018. Waste- to-energy can be applied as co-firing in power plant. This study aims to determine the potential utilization of refuse-derived-fuel as power plant at Suwung Sarbagita Landfill and Bali Province as study case. Wastes are produced into briquette as refuse-derived-fuel. The proximate test results of briquette characteristics were analyzed in laboratory. Potential utilization calculation using data of waste generation in Bali Province, briquette characteristics especially calorific value, and optimal coal and briquette ratio of co-firing process. From the calculation with assuming using Integrated Gasification Combined Cycle (IGGC) system technology with efficiency of 45%, waste in Suwung Sarbagita Landfill, Bali Province has the potential to generate electricity of 101.6 MW.
Syngas-Enriched hydrogen production via catalytic gasification of water hyacinth using renewable palm kernel shell hydrochar

April Ling Kwang Chee,Bridgid Lai Fui Chin,Shaharin Anwar Sulaiman,Yee Ho Chai,Agus Saptoro,Hadiza Aminu Umar,Serene Sow Mun Lock,Chung Long Yiin

DOI: https://doi.org/10.1016/j.fuel.2023.130811

IF: 7.4

2024-01-08

Fuel

Abstract:Syngas produced from biomass gasification has emerged as a highly promising substitute for conventional fossil fuel, catering to various industrial applications while ensuring minimal greenhouse gas emissions. Water hyacinth (WH) has been a major concern due to its invasive nature and uncontrollable growth which impedes aquatic growth and urban management. Fortunately, WH is a potential biomass feedstock due to the comparable cellulose and hemicellulose contents alongside high carbon content and high calorific value which reflects good biofuel properties. Therefore, this study aims to investigate the conversion of WH biomass via catalytic air gasification for syngas-enriched hydrogen production using palm kernel shell hydrochar (PKSH). A parametric study was conducted in a lab-scale fixed-bed downdraft gasifier based on the response surface methodology coupled with Box-Behnken design (RSM-BBD). The combined interaction effects of the influencing parameters investigated are temperature (600–800 °C), biomass particle size (2–6 mm), catalyst loading (0–10 wt%), and air flow rate (1–3 L/min). Temperature was revealed to be the primary factor with significant influence on the H 2 and CO output. Maximum syngas (30.09 vol%) compositions of 11.14 vol% H 2 and 18.95 vol% CO were obtained at 800 °C with a particle size of 6 mm and air flow rate of 2 L/min alongside 5 wt% PKSH catalyst loading.

energy & fuels,engineering, chemical
Syngas Production, Clean-Up and Wastewater Management in a Demo-Scale Fixed-Bed Updraft Biomass Gasification Unit

Gabriele Calì,Paolo Deiana,Claudia Bassano,Simone Meloni,Enrico Maggio,Michele Mascia,Alberto Pettinau

DOI: https://doi.org/10.3390/en13102594

IF: 3.2

2020-05-20

Energies

Abstract:This paper presents the experimental development at demonstration scale of an integrated gasification system fed with wood chips. The unit is based on a fixed-bed, updraft and air-blown gasifier—with a nominal capacity of 5 MWth—equipped with a wet scrubber for syngas clean-up and an integrated chemical and physical wastewater management system. Gasification performance, syngas composition and temperature profile are presented for the optimal operating conditions and with reference to two kinds of biomass used as primary fuels, i.e., stone pine and eucalyptus from local forests (combined heat and power generation from this kind of fuel represents a good opportunity to exploit distributed generation systems that can be part of a new energy paradigm in the framework of the circular economy). The gasification unit is characterised by a high efficiency (about 79–80%) and an operation stability during each test. Particular attention has been paid to the optimisation of an integrated double stage wastewater management system—which includes an oil skimmer and an activated carbon adsorption filter—designed to minimise both liquid residues and water make-up. The possibility to recycle part of the separated oil and used activated carbon to the gasifier has been also evaluated.

energy & fuels
Biogas Power Generation from Palm Oil Mill Effluent (POME): Techno-Economic and Environmental Impact Evaluation

Ahyahudin Sodri,Fentinur Evida Septriana

DOI: https://doi.org/10.3390/en15197265

IF: 3.2

2022-10-04

Energies

Abstract:Using palm oil mill effluent (POME) to produce biogas is an alternative and sustainable way to control POME GHG emissions while also providing economic benefits. The increasing area of oil palm plantations encourages an increase in palm oil production and the generation of POME in Indonesia. This could increase potential GHG emissions and global warming. In contrast, biogas power plants from POME are less attractive for economic investment in Indonesia. However, as the world's largest palm oil producer, Indonesia still lacks techno-economic and environmental studies of biogas power generation from POME. This study aimed to evaluate the technical, economic, and environmental aspects of the biogas power generation from POME at the study site (Bangka Island, Indonesia). The result shows that the biogas plant at the study site can reduce COD levels of POME by up to 91% and produce biogas at 325,292 m3/month, with a 55% methane content. Biogas can be converted into electrical energy at 696,163 kWh/month. The operation of this biogas plant can reduce GHG emissions by 1131 tons CO2-eq/month, with low profitability (NPV of IDR—1,281,136,274, IRR 6.75%, and a payback period of 10.8 years). This evaluation proves that the main problem in the factory is the POME used, which is insufficient, and which could be overcome by purchasing POME from other palm oil mills. Furthermore, using the mesophilic anaerobic degradation process at the study site is feasible. However, a technological shift from closed lagoons to more efficient bioreactors is urgently needed, to increase the process efficiency and economic benefits.

energy & fuels
Stochastic techno-economic evaluation model for biomass supply chain: A biomass gasification case study with supply chain uncertainties

Shirleen Lee Yuen Lo,Bing Shen How,Sin Yong Teng,Chun Hsion Lim,Muhammad Akbar Rhamdhani,Jaka Sunarso,Hon Loong Lam

DOI: https://doi.org/10.1016/j.rser.2021.111644

IF: 16.799

2021-12-01

Renewable and Sustainable Energy Reviews

Abstract:Sustainable development has been a goal for many industries, which can be achieved via the substitution of non-renewable feedstocks with greener alternatives such as substituting coal with biomass for gasification process. The sustainably produced biomass-derived syngas has a lower carbon emission when utilized as a fuel. Although most studies have reported the possible impact of biomass quality on the feasibility of biomass conversion process, there is still little published works on the incorporation of biomass quality directly into developed mathematical evaluation model. Therefore, this paper aims to perform techno-economic feasibility evaluation on biomass gasification process, with the consideration of various supply chain uncertainties via Monte Carlo simulation (i.e., biomass supply, biomass quality, biomass pricing, transportation fuel price, and syngas sale price). This is achieved via integration of a generic correlation equation relating biomass quality to specific syngas yield into the Monte Carlo model. Upon consideration of the uncertainties, this study revealed that mesocarp fibre has a higher net present value (NPV) in the range of Malaysian Ringgit (MYR) 70 million to greater than MYR 120 million amongst the three types of palm-based biomass (empty fruit bunches (EFB), palm kernel shells (PKS), and mesocarp fibre). Additionally, environmental assessment performed deduced that mesocarp fibre is slightly more preferable in the impact category for HTPI and TTP with a probability of 98 % to achieve the equivalent emissions within the lower range of 0–0.2 kg 1,4-C6H4Cl2,eq whereas EFB and PKS has a probability of 18 % and 28 %, respectively.

energy & fuels,green & sustainable science & technology
Effect of syngas recirculation in the pyrolysis zone on the rice husk gasification process using the downdraft reactor

Rudi Hermawan,Cahyadi,Adi Suryosatyo,Yohanis Tangke Tosuli,Hafif Dafiqurrohman

DOI: https://doi.org/10.1016/j.csite.2024.104182

IF: 6.268

2024-03-17

Case Studies in Thermal Engineering

Abstract:As one of the world's largest rice producers, Indonesia has an abundance of rice husk as a byproduct of rice milling. Rice husks were utilized to examine downdraft gasification with syngas recirculation system. This study attempts to produce better syngas than conventional downdraft gasifier. With an equivalency ratio of 0.20, syngas was recirculated into the reactor in the pyrolysis zone with valve openings at 25%, 50%, and 75%. This study determined the syngas recycling ratio that maximizes H 2 and CO gas and decreases tar. Increasing the syngas recirculation valve (25%, 50%, and 75%) accelerates flame propagation and pyrolysis zone temperature. Syngas study showed no recirculation condition produces the maximum CO 2 and CH 4 . Different recirculation valve openings little affect CO and CH 4 gas composition. The H 2 gas composition demonstrates that valve openings significantly change H 2 gas generation and that the peak was at 50% syngas recirculation. Tar content decreased to 30% and 35% at 50% and 75% valve openings. Based on H 2 /CO comparison and tar concentration, 50% opening syngas recirculation became the optimum case.

thermodynamics
Techno-economic analysis of producing low heating value underground coal gasification gas in Indonesia

M. Huda,S. Salinita,Zulfahmi,N Madiutomo,E Handayani

DOI: https://doi.org/10.1088/1755-1315/882/1/012081

2021-11-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract Indonesia is currently reviewing the use of underground coal gasification (UCG) technology to utilize deep-seated coal. UCG may exploit the coal deposit that is not feasible for open-pit mines due to its great depths. In this study, the UCG plant in two coal mines, the Kideco Jaya Agung (KJA) and the Indominco (IMM) coal mines, will be compared their economics in producing low heating value gas with a capacity of 170,000 MJ/hour. The UCG plants implement the linking vertical well (LVW) technique combined with reverses combustion linking (RCL). The discounted cash flow (DCF) method is used for financial analysis to determine the minimum selling price of UCG low heating value gas. The study aims to understand the economic feasibility of applying UCG technology to Indonesia’s different characteristics of coal deposits. The results show the minimum prices of the low heating value UCG gas of KJA and IMM UCG plants are USD 3/MMBTU and USD 3.57/MMBTU, respectively. The operating cost of the IMM UCG is higher than that of the KJA UCG plant due to its thinner and deeper coal seams.
Progress and utilization of biomass gasification for decentralized energy generation: an outlook & critical review

Deepak Kumar Singh,Reetu Raj,Jeewan Vachan Tirkey,Priyaranjan Jena,Prakash Parthasarathy,Gordon Mckay,Tareq Al-Ansari

DOI: https://doi.org/10.1080/21622515.2023.2242014

2023-08-10

Environmental Technology Reviews

Abstract:In light of resource depletion, energy scarcity, and toxic waste management, gasification is regarded as a viable waste-to-energy conversion method. Moreover, the Gasifier-Engine-Genest combo provides a suitable alternative for distributed electric power, waste conversion, and alleviating electricity scarcity. Despite an abundance of research report, it is not usually acknowledged as a viable alternative to traditional energy sources. Thus, to promote Gasification, efficient technology is required to maximize the yield of syngas with clean and improved calorific value. Furthermore, there is a void in the prior study that summarises the various types of biomasses and their pre-treatment, as well as the progression of conventional gasification to advanced gasification for the improvement of syngas quality and respective critical applications. Moreover, this is necessary in order to organise the conditions and biomass for gasification, which are many and frequently scattered in the literature. Hence, this study summarises the detailed review of recent novel concepts development over conventional techniques of biomass gasification. Recent reports on feed material properties of diverse biomass, as well as pre-treatment employing biomass torrefaction for gasification, are presented in this paper in order to evaluate their potential. In addition, a literature review of the various categories of gasification, the gasification processes, and the impact of technology on the quality of syngas, power generation and distribution were reported. In conclusion, it is proposed that enhanced gasification technology be employed to implement sustainable development in order to reduce the existing reliance on non-renewable energy sources. GRAPHICAL
Evaluation of potential feedstock for biogas production via anaerobic digestion in Malaysia: kinetic studies and economics analysis

Yik Fu Lim,Yi Jing Chan,Yousif Abdalla Abakr,Vasanthi Sethu,Anurita Selvarajoo,Ajit Singh,Junyan Lee,Milton Gareth

DOI: https://doi.org/10.1080/09593330.2021.1882587

IF: 3.475

2021-02-18

Environmental Technology

Abstract:As the population increases, energy demands continue to rise rapidly. In order to satisfy this increasing energy demand, biogas offers a potential alternative. Biogas is economically viable to be produced through anaerobic digestion (AD) from various biomass feedstocks that are readily available in Malaysia, such as food waste (FW), palm oil mill effluent (POME), garden waste (GW), landfill, sewage sludge (SS) and animal manure. This paper aims to determine the potential feedstocks for biogas production via AD based on their characteristics, methane yield, kinetic studies and economic analysis. POME and FW show the highest methane yield with biogas yields up to 0.50 L/g VS while the lowest is 0.12 L/g VS by landfill leachate. Kinetic study shows that modified Gompertz model fits most of the feedstock with R 2 up to 1 indicating that this model can be used for estimating treatment efficiencies of full-scale reactors and performing scale-up analysis. The economic analysis shows that POME has the shortest payback period (PBP), highest internal rate of return (IRR) and net present value (NPV). However, it has already been well explored, with 93% of biogas plants in Malaysia using POME as feedstock. The FW generation rate in Malaysia is approximately 15,000 tonnes per day, at the same time FW as the second place shows potential to have a PBP of 5.4 years and 13.3% IRR, which is close to the results achieved with POME. This makes FW suitable to be used as the feedstock for biogas production.GRAPHICAL

environmental sciences
Production of Sorghum Pellets for Electricity Generation in Indonesia: A Life Cycle Assessment

Edi Iswanto Wiloso,Arief Anieir Rahman Setiawan,Hafiizh Prasetia,Muryanto,Adisa Ramadhan Wiloso,Subyakto,I. Made Sudiana,Reni Lestari,Satya Nugroho,Dede Hermawan,Kai Fang,Reinout Heijungs

DOI: https://doi.org/10.18331/brj2020.7.3.2

2020-01-01

Biofuel Research Journal

Abstract:The current study makes use of life cycle assessment to evaluate the potential greenhouse gas (GHG) savings in coal electricity generation by 5% co-firing with sorghum pellets. The research models the utilization of 100 thousand hectares of under-utilized marginal land in Flores (Indonesia) for biomass sorghum cultivation. Based on equivalent energy content, 1.12 tons of pellets can substitute one ton of coal. The calculated fossil energy ratio of the pellets was 5.8, indicating that the production of pellets for fuel is energetically feasible. Based on a biomass yield of 48 ton/ha·yr, 4.8 million tons of pellets can be produced annually. In comparison with a coal system, the combustion of only pellets to generate 8,300 GWh of electricity can reduce global warming impacts by 7.9 million tons of CO2-eq, which is equivalent to an 85% reduction in GHG emissions. However, these results changed when reduced biomass yield of 24 ton/ha·yr, biomass loss, field emissions, and incomplete combustion were considered in the model. A sensitivity analysis of the above factors showed that the potential GHG savings could decrease from the initially projected 85% to as low as 70%. Overall, the production of sorghum pellets in Flores and their utilization for electricity generation can significantly reduce the reliance on fossil fuels and contribute to climate change mitigation. Some limitations to these conclusions were also discussed herein. The results of this scenario study can assist the Indonesian government in exploring the potential utilization of marginal land for bioenergy development, both in Indonesia and beyond.
Improved performance of CS 100l LPG fuel generator with the addition of biogas

Caturwati Ni Ketut,Agung Sudrajad,Heri Haryanto

DOI: https://doi.org/10.1088/1757-899x/494/1/012068

2019-03-29

IOP Conference Series: Materials Science and Engineering

Abstract:Biogas is one of the new renewable energy sources that can be obtained through anaerobic degradation process of organic materials. Utilization of household waste, agricultural waste and livestock as the main ingredient of biogas production in addition to generate new renewable energy sources can also minimize the negative impact of waste to the environment. In this research, the performance test of CS 1000 L LPG generator engine and compare it with the use of LPG fuel added a little biogas. With a slight addition of biogas into the generator's engine chamber (0.6 Nl / min) obtained an effective engine power increased by an average of 2.4% of the generated power generator with LPG fuel. In addition, the results of the test of emissions when no load (idle) to reduce the CO content in the exhaust gas reaches 89% and the decrease of 99% of HC content. Thus, the addition of a small amount of biogas into the combustion chamber of the genset machine can avoid significant exhaust gas pollution as required by the Regulation of the Minister of Environment of Indonesia No. 05 of 2006.

Economic Feasibility Study of Syngas-Derived Garden Waste Biomass as Liquified Petroleum Gas Substitute in Indonesia: A Case Study for 1-Megawatt Updraft Fixed Bed Gasifier

Economics of Distributed Power Generation via Gasification of Biomass and Municipal Solid Waste

Feasibility Study for Blended Gas Fuel Combustion in Boilers of Thermal Power Plant

Micro-Grid Oil Palm Plantation Waste Gasification Power Plant in Indonesia: Techno-Economic and Socio-Environmental Analysis

Gasification and Techno-Economic Study of Palm Shell Biomass and the Utilization of Dual Fuel Diesel Engine Operated Diesel Engine

Unlocking the techno-economic potential of biomass gasification for power generation: Comparative analysis across diverse plant capacities

Plasma Gasification With Municipal Solid Waste As A Method Of Energy Self Sustained For Better Urban Built Environment: Modeling and Simulation

Kajian Tekno “Waste to Electric” dengan Bahan Baku Pelet Woodchip Memalalui Gasifikasi Multi Stage pada Mesin Diesel Dual Fuel

Zero-Waste Bioenergy to Lower Energy Transition Risks in Indonesia — A Circular Economy Practice on Methane Capture in Biogas Production from POME

Domestic waste briquetting as refuse-derived-fuel for power plant alternative energy (case study: Bali Province)

Syngas-Enriched hydrogen production via catalytic gasification of water hyacinth using renewable palm kernel shell hydrochar

Syngas Production, Clean-Up and Wastewater Management in a Demo-Scale Fixed-Bed Updraft Biomass Gasification Unit

Biogas Power Generation from Palm Oil Mill Effluent (POME): Techno-Economic and Environmental Impact Evaluation

Stochastic techno-economic evaluation model for biomass supply chain: A biomass gasification case study with supply chain uncertainties

Effect of syngas recirculation in the pyrolysis zone on the rice husk gasification process using the downdraft reactor

Techno-economic analysis of producing low heating value underground coal gasification gas in Indonesia

Progress and utilization of biomass gasification for decentralized energy generation: an outlook & critical review

Evaluation of potential feedstock for biogas production via anaerobic digestion in Malaysia: kinetic studies and economics analysis

Production of Sorghum Pellets for Electricity Generation in Indonesia: A Life Cycle Assessment

Improved performance of CS 100l LPG fuel generator with the addition of biogas