Abstract:Sound field modeling of sequential spaces is required for large-scale public buildings. A finite element model comprising five successive rooms was used for a parametric study considering, contextual factors (opening dimension and position, number of rooms), acoustic (absorption coefficient and distribution) and source factors (directional radiation from the opening and an additional source), with the following results: (i) In rooms with high absorption, the average sound pressure level (SPL) of the rooms is higher, and the level difference between rooms is smaller with larger opening dimensions. The opening position has a significant impact only for rooms with low absorption. (ii) The level differences between rooms are larger for oblique than horizontal radiation, especially for rooms close to the source. With an additional source (e.g., a heating, ventilation, and air conditioning system or human speech) in a room, the level in that room will be maintained or reduced by approximately-10 dB with increasing opening dimensions for high or low room absorption, respectively, whereas levels in other rooms increase for high room absorption. (iii) Changes to low absorption coefficients have more significant effects. For a given absorption amount, the difference in average SPL in a room between uniform and nonuniform absorption distribution are greater with smaller opening dimensions. (iv) The effect on the average SPL in the first receiving room, caused by adding more sequential rooms is less when the absorption in those rooms is high (e.g., an absorption coefficient of 0.5), and the maximum difference with different absorption coefficients is-6 dB, depending on the number of rooms.

Spatial aspects of reproduced sound in small rooms

Spatial resolution of late reverberation in virtual acoustic environments

On the relevance of acoustic measurements for creating realistic virtual acoustic environments

Spatial Variation Of Sound Field In Large Spaces

Spatial Analysis and Synthesis Methods: Subjective and Objective Evaluations Using Various Microphone Arrays in the Auralization of a Critical Listening Room

Spatial audio reproduction for studying second language speech perception in varying acoustic environments

Modeling of reverberant room responses for two-dimensional spatial sound field analysis and synthesis.

Evaluation of spatial audio reproduction schemes for application in hearing aid research

Perception Difference for Approaching and Receding Sound Sources of a Listener in Motion in Architectural Sequential Spaces

A Method for Capturing and Reproducing Directional Reverberation in Six Degrees of Freedom

Evaluation of Virtual Acoustic Environments with Different Acoustic Level of Detail

Binaural room acoustics

Sound Attenuation and Reverberation in Sequential Spaces: an Experimental Study

Investigating sound-field reproduction methods as perceived by bilateral hearing aid users and normal-hearing listeners

Spatial Reverberation and Dereverberation using an Acoustic Multiple-Input Multiple-Output System

Acoustic Modeling of Sequential Spaces: A Parametric Study

Impact of Reverberation on Speech Perception in Noise in Bimodal/Bilateral Cochlear Implant Users with and without Residual Hearing

Experimental research on 3D sound reproduction with reflection boundary

Subjective Evaluation of Sequential Spaces

Sound Quality Inside Small Meeting Rooms with Different Room Shape and Fine Structures

Listener-Position and Orientation Dependency of Auditory Perception in an Enclosed Space: Elicitation of Salient Attributes