Abstract:Small-diameter synthetic vascular grafts have high failure rate due to primarily surface thrombogenicity, and effective surface chemical modification is critical to maintain the patency of the grafts. In this study, we engineered a small-diameter, elastic synthetic vascular graft with off-the-shelf availability and antithrombogenic activity. Polycarbonate-urethane (PCU), was electrospun to produce nanofibrous grafts that closely mimicked a native blood vessel in terms of structural and mechanical strength. To overcome the difficulty of adding functional groups to PCU, we explored various surface modification methods, and determined that plasma treatment was the most effective method to modify the graft surface with functional amine groups, which were subsequently employed to conjugate heparin via end-point immobilization. In addition, we confirmed in vitro that the combination of plasma treatment and end-point immobilization of heparin exhibited the highest surface density and correspondingly the highest antithrombogenic activity of heparin molecules. Furthermore, from an in vivo study using a rat common carotid artery anastomosis model, we showed that plasma-heparin grafts had higher patency rate at 2 weeks and 4 weeks compared to plasma-control (untreated) grafts. More importantly, we observed a more complete endothelialization of the lumina] surface with an aligned, well-organized monolayer of endothelial cells, as well as more extensive graft integration in terms of vascularization and cell infiltration from the surrounding tissue. This work demonstrates the feasibility of electrospinning PCU as synthetic elastic material to fabricate nanofibrous vascular grafts, as well as the potential to endow desired functionalization to the graft surface via plasma treatment for the conjugation of heparin or other bioactive molecules.Statement of SignificanceVascular occlusion remains the leading cause of death all over the world, despite advances made in balloon angioplasty and conventional surgical intervention. Currently, autografts are the gold-standard grafts used to treat vascular occlusive disease. However, many patients with vascular occlusive disease do not have autologous vascular graft available. Therefore, there is a widely recognized need for a readily available, functional, small-diameter vascular graft (inner diameter of <6 mm). This work addresses this critical need by developing a method of antithrombogenic modification of synthetic grafts. (c) 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Functional Surfaces by Plasma Grafting of Itaconic Acid onto Polypropylene Mesh: Synthesis & Structural Investigations

Plasma-induced Polymerization and Grafting of Acrylic Acid on the Polypropylene Nonwoven Fabric Using Pulsed Underwater Diaphragm Electrical Discharge

Surface Modification of Polypropylene Film by Radiation‐induced Grafting and Its Blood Compatibility

Grafting of Telechelic Poly(lactic‐co‐glycolic Acid) Onto O2 Plasma‐treated Polypropylene Flakes

Plasma surface modification technique–induced gelatin grafting on bio-originated polyurethane porous matrix: Physicochemical and in vitro study

Plasma functionalization of poly(vinyl alcohol) hydrogel for cell adhesion enhancement

Towards a methodology for the effective surface modification of porous polymer scaffolds

End-point Immobilization of Heparin on Plasma-Treated Surface of Electrospun Polycarbonate-Urethane Vascular Graft.

Localized surface functionalization of polycaprolactone with atmospheric-pressure microplasma jet

Electrospun Poly(ε-caprolactone) Fiber Scaffolds Functionalized by the Covalent Grafting of a Bioactive Polymer: Surface Characterization and Influence on in Vitro Biological Response

Atmospheric Pressure Plasma Jet Exposure of Polylactic Acid Surfaces for Better Adhesion: Plasma Parameters towards Polymer Properties

Modification of surface properties of polypropylene (PP) film using DC glow discharge air plasma

Surface Modification of Porous Polypropylene Membrane by Plasma-Initiated RAFT Graft Polymerization

On‐Demand Bioactivation of Inert Materials with Plasma‐Polymerized Nanoparticles

Surface Modification of Polyisobutylene Via Grafting Amino Acid-Based Poly (Acryloyl-6-aminocaproic Acid) As Multifunctional Material.

Plasma graft polymerization of Acrylic Acid and immobilization of Heparin to improve blood compatibility of Polyethylene terephthalate (PET).

Surface functionalization of degradable polymers by covalent grafting

Grafting copolymerization of acrylamides onto preirradiated PP films

Nitrogen Plasma Treatment of Composite Materials Based on Polylactic Acid and Hydroxyapatite

The Effect of Argon Plasma Surface Treatment on Poly(lactic-co-glycolic acid)/Collagen-Based Biomaterials for Bone Tissue Engineering

Grafting Copolymerization of Polyethylene Glycol Methacrylate (PEGMA) Onto Preirradiated PP Films