Abstract:High voltage cable is an important part of the power system. Water ingress into the buffer layer and poor contact with the aluminum sheath in high voltage cables can cause ablation defects and local overheating. Power accidents due to buffer layer ablation have occurred frequently in recent years. However, there is a lack of effective diagnostic methods for buffer layer ablation defects. To address the above problems, a multi-parameter detection method for ablation defects in the buffer layer of high-voltage cables based on gas, temperature, and pressure analysis is proposed. The volume fraction, temperature, and pressure of the characteristic gases C 2 H 6 , C 2 H 4 , CO, and H 2 are used as the characteristic parameters to characterize the ablation defects of the buffer layer. Infrared spectroscopy was used to analyze the volume fraction of the characteristic gases, a thermocouple sensor was used to measure the temperature, and a piezoelectric sensor was used to measure the pressure. Simulated ablation analysis experiments and actual cable detection verified the method's validity. The results show that with the increase of ablation time, the characteristic gas volume fraction, temperature, and pressure all show an increasing trend. The characteristic gas volume fraction, temperature and pressure in the buffer layer of high-voltage cables with ablation defects in the field are higher than those without ablation. The characteristic gases, temperature, and pressure can be used to characterize the buffer layer ablation defects and to diagnose these defects. It is expected to be a new diagnostic method for buffer layer ablation defects in high voltage cables. It can support the early warning of power accidents and improve the safety of high-voltage cable operation.

Research on Cable Insulation Layer Defect Detection Based on Terahertz Technology

Defect Detection of Composite Materials for Cable Insulation Layer Based on Terahertz

Detection of Water Leakage Defects in Cable Insulation Sheath Based on Terahertz Time-Domain Spectroscopy

Terahertz-Based Insulation Delamination Defect Inspection of Vehicle Cable Terminals

Distribution network cable detection based on terahertz pulse and imaging

A Novel Non-destructive Diagnosis Method for Cable Insulation Defect Based on Broadband Impedance Spectroscopy

Anomalous Attenuation Phenomenon of Terahertz Wave Through the Micron Air Gap Defects in Xlpe Insulation Material

Detection Method for Metal Impurities and Interlayer Moisture in Power Insulation Equipment by Terahertz Technology

Detection of Small Defects in Composite Insulators Using Terahertz Technique and Deconvolution Method

Study on Detection of Insulator Defects in Time Domain Terahertz Wave

Underground Power Cable Fault Detection and Localization Based on the Spectrum of Propagation Functions

A Novel Cable Defect Localization Technique Via Time-Frequency Domain Reflectometry

Finite Difference Time Domain Modeling and Inversion of Internal Delamination Defects in Vehicle Cable Terminal in Terahertz Band

Multi-Parameter Detection of Defects in HV Cable Buffer Layer Based on Gas, Temperature, and Pressure

Analysis and Diagnosis of Shielded Cable Faults Based on Finite-Element Method and Time-Reversal Time-Frequency Domain Reflectometry

Defect detection and identification for aircraft cable insulation layer based on deep forest

Research on live detection technology of cable joint defects based on high-speed light sensing and pressure wave method

Defect Detection of Cable Termination Based on the Microwave Reflection Method

Research on Defects of High Voltage Cable Fusion Joint Using XLPE Insulation Material

A Novel Method for Identifying Cable Defect and Improving Location Accuracy Based on Frequency Domain Reflectometry

Terahertz Nondestructive Testing Method of Oil-paper Insulation Debonding and Foreign Matter Defects