Abstract:Objective: Oblique lateral interbody fusion (OLIF) surgery is a minimally invasive spinal surgery technique that has become increasingly popular in recent years. The primary objective of the current study was to design a minimally invasive expandable fusion device that can reduce iatrogenic nerve damage and minimize endplate damage during OLIF surgery, while restoring intervertebral height and alignment. The second objective was to use finite element analysis to evaluate the biomechanical stability of the newly designed expandable fusion device after implantation into the intervertebral space. Methods: A new bidirectional expandable cage was designed in this study. A finite element model (FEM) of L3-L5 lumbar segment was modified to simulate decompression and fusion. The modified FEMs were constructed in the following cases: intact model, bidirectional expandable cage (alone, with unilateral pedicle screws [UPSs], and with bilateral pedicle screws [BPSs]) model, conventional OLIF cage (alone, with UPSs, and with BPSs) model. To simulate physiological loadings, the models were subjected to a follower compressive pre-load of 400 N, in addition to 8.0 Nm of flexion, extension, lateral bending, and axial rotation moments. Result: All modified FEMs exhibited a significant reduction in motion at L3-L5 compared to the intact model. Among the fusion models, the bidirectional expandable cage (BEC) with BPS model displayed the highest stiffness and demonstrated a reduced range of motion (48.5%-75.7%). Additionally, the peak stress on the endplate in the conventional OLIF cage (Conv-OLIF) model was generally lower than that in the BEC models. The cage in the BEC ALONE model exhibited the highest stress (93.87-176.3 MPa) on the endplate in most motion modes, while the cage in the Conv-OLIF+BPS model had the lowest stress (16.67-30.58 MPa) on the endplate in most motion modes. The maximum stress on the fixation in the BEC fusion models was generally lower than that in the Conv-OLIF fusion group under the same loading conditions. The OLIF ALONE model had the lowest stress on the adjacent disc, while the stress level in the BEC ALONE model was very close to it. Conclusions: The BEC implanted models had higher stiffness, and more proper stress distribution on the posterior fixation was comparable to that of the Conv-OLIF models. However, the endplate stress peaks and cage stress peaks of the BEC models were slightly higher than those of the Conv-OLIF models, though still within a clinically acceptable range. Taking into account both biomechanical and clinical perspectives, BEC-assisted unilateral pedicle screw fixation meet clinical demand and may serve as a viable alternative to Conv-OLIF fusion.

Biomechanical differences between two different shapes of oblique lumbar interbody fusion cages on whether to add posterior internal fixation system: a finite element analysis

The biomechanical study of a modified lumbar interbody fusion-crenel lateral interbody fusion (CLIF): a three-dimensional finite-element analysis.

In Vitro Study of Biomechanical Analysis of Modified Lateral Lumbar Interbody Fusion—crenel Lumbar Interbody Fusion

A New Expanded Cage Designed for Lumbar Disc Herniation: Finite Element Analysis

Biomechanical evaluation of different oblique lumbar interbody fusion constructs: a finite element analysis

Oblique Lateral Interbody Fusion Combined With Lateral Plate Fixation for the Treatment of Lumbar Degenerative Diseases: a Preliminary Clinical Study

Biomechanical changes of oblique lumbar interbody fusion with different fixation techniques in degenerative spondylolisthesis lumbar spine: a finite element analysis

Oblique lateral interbody fusion combined with different internal fixations for the treatment of degenerative lumbar spine disease: a finite element analysis

Oblique Lateral Interbody Fusion Combined With Different Internal Fixations in The Treatment of Degenerative Lumbar Spine Disease: A Finite Element Analysis

Finite element analysis of biomechanical investigation on diverse internal fixation techniques in oblique lumbar interbody fusion

Biomechanical study of oblique lumbar interbody fusion (OLIF) augmented with different types of instrumentation: a finite element analysis

Biomechanical Evaluation of an Oblique Lateral Locking Plate System for Oblique Lumbar Interbody Fusion: A Finite Element Analysis

Biomechanical stability of oblique lateral interbody fusion combined with four types of internal fixations: finite element analysis

Biomechanical Analysis of Lateral Lumbar Interbody Fusion Constructs with Various Fixation Options: Based on a Validated Finite Element Model.

Design and Biomechanical Evaluation of a Bidirectional Expandable Cage for Oblique Lateral Interbody Fusion

Biomechanical Evaluation of Anterolateral Screw Fixation for Oblique Lumbar Interbody Fusion Surgery – A Finite Element Analysis

Biomechanical study of two-level oblique lumbar interbody fusion with different types of lateral instrumentation: a finite element analysis

Comparative Biomechanical Analysis of Anterior Lumbar Interbody Fusion and Bilateral Expandable Transforaminal Lumbar Interbody Fusion Cages: A Finite Element Analysis Study

An in vitro biomechanical evaluation of integrated lateral plate combined with oblique lateral interbody fusion in different bone conditions

Biomechanical properties analysis of posterior lumbar interbody fusion with transpedicular oblique screw fixation

Biomechanical Evaluation of Anterior Lumbar Interbody Fusion with Various Fixation Options: Finite Element Analysis of Static and Vibration Conditions.