Abstract:As a crucial weapon in the sea battle, anti-ship missiles generally employ a sea-skimming penetration strategy to reduce the probability of being detected by the target radar, which greatly increases the risk of touching water caused by sensor errors or random sea conditions. To alleviate the large impact load by high-velocity water touching, a novel anti-ship missile body configuration is proposed in this paper, which is inspired by the idea of hydroplaning. A parametric geometry model is first developed to modify the configuration of the anti-ship missile body. Subsequently, a structured arbitrary Lagrange-Eulerian based Fluid-Structure Interaction (FSI) model is established to analyze the kinematics parameters of the missile body during the hydroplaning process. A missile body configuration optimization problem is then formulated to minimize the impact load considering several constraints, e.g., horizontal velocity loss, pitch angle after touching water, and inside capacity for payload. Due to the time-consuming FSI simulation, a Kriging-assisted constrained differential evolution method is utilized to optimize the missile body configuration for reducing the impact load. During the optimization process, radial basis function and Kriging are combined with evolutionary operators to lead the search to the vicinity of the optimum rapidly. The result shows that the proposed missile body configuration can reduce the impact load by 18.8% compared with the ordinary configuration. Additionally, the optimized configuration can further yield a 17.4% impact load decrease subject to all the constraints and avoid structural damage by the high-velocity water touching, which demonstrates the effectiveness and practicability of the proposed anti-ship missile body configuration and corresponding optimization framework for reducing the impact load.

Numerical study on the dynamic characteristics of a vehicle with a multistage load reduction structure during oblique water entry

Multiphase Flow Simulation of Water Entry of a Structure with Complex Geometry Using a Three-Dimensional Parallel Compressible Model

Formulations of Hydrodynamic Force in the Transition Stage of the Water Entry of Linear Wedges with Constant and Varying Speeds

Numerical Simulation of Water Entry of Two-Dimensional Structures with Complex Geometry Using a CIP-based Model

Exploring the load characteristics and structural responses of a high-speed vehicle entering water

Classification of the collapse of a composite fairing during the oblique high-speed water entry

Numerical analysis of cavitation and impact load characteristics of supercavitating vehicle entering water at high speed

Numerical Study of Air Cushion Effect in Notched Disk Water Entry Process Using Structured Arbitrary Lagrangian–Eulerian Method

Experimental Study and Numerical Simulation of the Water Entry of a Ship-Like Symmetry Section with an Obvious Bulbous Bow

Numerical Simulation of the Horizontal Water-Entry Process of High-Speed Vehicles

Experimental investigation on the slamming loads of a truncated 3D stern model entering into water

Surrogate-assisted optimization for anti-ship missile body configuration considering high-velocity water touching

Experimental and Numerical Prediction of Slamming Impact Loads Considering Fluid–Structure Interactions

Numerical Investigations of Cavitation Nose Structure of a High-Speed Projectile Impact on Water-Entry Characteristics

Simulation and experimental research on trans-media vehicle water-entry motion characteristics at low speed

Numerical study of hydrodynamic loads at early stage of vertical high-speed water entry of an axisymmetric blunt body

Dynamics analysis of high-speed water entry of axisymmetric body using fluid-structure-acoustic coupling method

Numerical simulation for high speed oblique water entry of different density projectiles

Numerical Research on Impacting Load and Structural Response for a Model Experiment of High-speed Craft

Application of multiphase Riemann-SPH in analysis of air-cushion effect and slamming load in water entry

Investigating the entry of symmetric/asymmetric elastic wedge into water