Abstract:Cigarette butts (CBs) are emerging polluting toxic plastic and microplastic elements that present a major challenge to environmental issues and recycling technologies. This is due to their complex composition consisting of cellulose acetate, cigarette paper, tar particles, tobacco, and heavy metals, thus, making it difficult to mechanically recycle, landfill, or incinerate them. In order to maximize their economic performance, this research aims to convert CBs into valuable volatile and chemical products using thermochemical treatment. Pyrolysis experiments were performed on each CB component separately (paper, filter, and tobacco) and their mixture (MIX) to determine the most complex part in the reaction and their effect on the synthesized pyrolysis vapour (PV) products. The experiments were carried out using thermogravimetric analyser (TGA) at heating rates 5, 10, 15, 20, 25, and 30 °C/min. The PVs generated from each batch under the specified heating conditions were analysed using Fourier transform infrared spectroscopy (TG/FTIR) and gas chromatography–mass spectrometry (GC/MS). Meanwhile, the complexity of reaction of CB components was investigated using three isoconversional model-free methods (Friedman, KAS, and FWO) and two nonlinear isoconversional models (Vyazovkin and Cai). The FTIR results showed that the PV products were rich in aromatic hydrocarbons (paper), carbonyl C = O (filter), CO2 (tobacco), and CO2 and carbonyl C = O (MIX). Whereas, phenol (paper; 42%), acetic acid (filter; 94%), pyridine (tobacco; 45%), and acetic acid (MIX: 74%) were the major GC/MS compounds at lower heating rates, and phenol (paper; 50%), acetic acid (filter; 93%), pyridine (tobacco; 39%), and several compounds in MIX sample (propanal, acetic acid, propanone, limonene, and pyridine) were manifested at higher heating rates. Finally, the kinetic results showed that tobacco represents the most complex part in decomposition of CBs (348 kJ/mol) compared to paper (238 kJ/mol) and filter (269 kJ/mol). Meanwhile, mixing all these components together reduced the complexity up to 184 kJ/mol (MIX), which contributed to decrease in energy consumption during the treatment at industrial scale.

Pyrolysis behavior of cigar wrapper, binder and filler

The Pyrolysis of Cigarette Paper under the Conditions That Simulate Cigarette Smouldering and Puffing

Pyrolysis Behavior of Paper-base of Paper-making Process Reconstituted Tobacco with Different Physical Parameters under Flash Pyrolysis Conditions

Investigation on the Synergistic Effect Between Different Components in Pyrolysis of Paper-Plastic Composite Material

Mechanism Study of Tobacco Pyrolysis Based on the Analysis of Characteristic Products and In-Situ Identification of Functional Groups Evolution on Pyrolytic Char

Morphology, Composition, and Mixing State of Primary Particles from Combustion Sources — Crop Residue, Wood, and Solid Waste

Effect of glycerol addition and heating rate on the thermal release behavior of cigar tobacco

Thermal Degradation and Flammability of Low Ignition Propensity Cigarette Paper

The Analysis Of Components In Cigarette Using Pyrolysis Gas Chromatography-Mass Spectrometry

Comparative Profiling of Microbial Communities and Volatile Organic Compounds in Fermented Wrapper, Binder, and Filler Cigar Tobaccos

Pyrolysis kinetic behaviour, TG-FTIR, and GC/MS analysis of cigarette butts and their components

Pyrolysis Characteristics of Different Humectant at High Temperature

The unique wick effect and combustion behavior of flax fiber reinforced composites: Experiment and simulation

Characterization of Pyrolysis Products from a Biodiesel Phenolic Urethane Binder.

Pyrolysis of Wood Species Based on the Compositional Analysis

Characterization of the key aroma compounds in cigar filler tobacco leaves from different production regions

Pyrolysis and combustion characterisation of HDPE/APP composites via molecular dynamics and CFD simulations

The Effect of Solvent Extraction on Pyrolytic Decomposition and Combustion of Cut Tobacco

Analysis on Pyrolysis Products of Tieguanyin Tea Stem Pulp in Tobacco Sheet

Effects of different tobacco materials on the release characteristics of aroma components

Pyrolysis characteristic of tobacco stem studied by Py- GC/MS, TG-FTIR, and TG-MS