Abstract:Pipelines are typically used to transport oil, natural gas, water, etc. It is one of the most effective methods for transferring fluids over long distances. However, long-term usage of these pipes without maintenance results in the formation of residues, which will pave the way for pipeline accidents and soil contamination. To ensure the safety and protection of resources, these sustainable pipelines need to be inspected to avoid losses. This work aims to investigate various internal defect leaks in the non-uniform thickness of sustainable water pipes that are joined with a pipe expander. The magnetic flux leakage technique was implemented to evaluate these defects by means of a flexible GMR sensor array. An inspection robot containing two units was fabricated with the aid of 3D printing. The power unit provides the necessary thrust to actuate the entire robot whereas the sensing unit is responsible for analyzing the leaks. The robot's movement is predicted by the MPU6050 and ultrasonic distance sensors that are plotted as motion plots. The sensing unit consists of permanent magnets and a giant magnetoresistance (GMR) array to interrogate the flux leakage in the defect region. The flux leakage from the defects was stored with the help of an Arduino microcontroller, which controls the overall process. In addition, the spring suspension is provided to regulate the motion of the robot. The flux leakage from the defect region was plotted as waveform graphs. Thus, the results are effectively presented and compared. The calculated signal-to-noise ratio (SNR) of the magnetic flux leakages (MFLs) for 4.5 mm-thick pipe defects was 12 to 20.8 dB, and for 6.52 mm-thick pipe defects, it was 9.5 to 19 dB. In sum, the MFL technique provides a reliable method for the sustainable development of water supply to wide areas.

Gaussian Mixture Marginal Distributions for Modelling Remaining Pipe Wall Thickness of Critical Water Mains in Non-Destructive Evaluation

Application of Microwaves for Nondestructive and High-Efficiency Detection of Wall Thinning Locations in a Long-Distance Metal Pipe

Probabilistic Mixture Model for Mapping the Underground Pipes.

A high-efficiency nondestructive method for remote detection and quantitative evaluation of pipe wall thinning using microwaves

G0310501 A Method for Quantitative Evaluation of Pipe Wall Thinning Using Microwaves

Gaussian Process Regression Based Inspection Robot for Predicting and Locating Pipeline Anticorrosion Coating Defects

Microwave Measurement and Quantitative Evaluation of Wall Thinning in Metal Pipes

Underground Pipeline Mapping Based on Dirichlet Process Mixture Model.

Dirichlet process crescent-signal mixture model for ground-penetrating radar signals

Optimizing the Frequency Range of Microwaves for High-Resolution Evaluation of Wall Thinning Locations in a Long-Distance Metal Pipe

Pipeline thickness measurement for in-line inspection using wholly stepped electromagnetic acoustic transducers

Analysis of Leakage in a Sustainable Water Pipeline Based on a Magnetic Flux Leakage Technique

Gaussian-Poisson Mixture Regression model for defects prediction in steelmaking

Ground-Penetrating Radar (GPR)-Based Mapping of Underground Pipeline Network Distribution

Rapid failure risk analysis of corroded gas pipelines using machine learning

Data Driven Water Pipe Failure Prediction: A Bayesian Nonparametric Approach.

Quantitative evaluation of pipe wall thinning defect sizes using microwave NDT

Detection and Classification of Uniform and Concentrated Wall-Thinning Defects Using High-Order Circumferential Guided Waves and Artificial Neural Networks

DEFECT RECOGNITION OF BURIED PIPELINE BASED ON APPROXIMATE ENTROPY AND VARIATIONAL MODE DECOMPOSITION

Estimation of Deposit Thickness in Single-Phase Liquid Flow Pipeline using Finite Volume Modelling

Quantitative research on stress failure risk assessment for girth welds with unequal wall thickness of the X80 pipeline under lateral load