Abstract:Functionalized aluminosilicate materials were studied as catalysts for the conversion of different cyclic carbonates to the corresponding epoxides by the addition of CO2. Aluminum was incorporated in the mesostructured SBA-15 silica network. Thereafter, functionalization with imidazolium chloride or magnesium oxide was performed on the Al_SBA-15 supports. The isomorphic substitution of Si with Al and the resulting acidity of the supports were investigated via 27Al magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy and NH3 adsorption microcalorimetry. The Al content and the amount of MgO were quantified via inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis. The anchoring of the imidazolium salt was assessed by 29Si and 13C MAS NMR spectroscopy and quantified by combustion chemical analysis. Textural and structural properties of supports and catalysts were studied by N2 physisorption and X-ray diffraction (XRD). The functionalized systems were then tested as catalysts for the conversion of CO2 and epoxides to cyclic carbonates in a batch reactor at 100 or 125 °C, with an initial CO2 pressure (at room temperature) of 25 bar. Whereas the activity of the MgO/xAl_SBA-15 systems was moderate for the conversion of glycidol to the corresponding cyclic carbonate, the Al_SBA-15-supported imidazolium chloride catalysts gave excellent results over different epoxides (conversion of glycidol, epichlorohydrin, and styrene oxide up to 89%, 78%, and 18%, respectively). Reusability tests were also performed. Even when some deactivation from one run to the other was observed, a comparison with the literature showed the Al-containing imidazolium systems to be promising catalysts. The fully heterogeneous nature of the present catalysts, where the inorganic support on which the imidazolium species are immobilized also contains the Lewis acid sites, gives them a further advantage with respect to most of the catalytic systems reported in the literature so far.

Cycloaddition of Carbon Dioxide to Allyl Glycidyl Ether Using Silica-supported Ionic Liquid as a Catalyst

The Immobilization of Glycidyl-Group-containing Ionic Liquids and Its Application in CO2 Cycloaddition Reactions

Aluminosilicate-Supported Catalysts for the Synthesis of Cyclic Carbonates by Reaction of CO2 with the Corresponding Epoxides

Efficient heterogeneous functionalized polymer ionic liquid catalyst for the synthesis of ethylene carbonate via the coupling of carbon dioxide with ethylene oxide

MCM-41 supported quaternary ammonium ionic liquids as an effective heterogeneous catalyst for CO2 cycloaddition reaction

Efficient conversion of CO2 into cyclic carbonates at room temperature catalyzed by Al-salen and imidazolium hydrogen carbonate ionic liquids

An organic polymer-grafted ionic liquid as a catalyst for the cycloaddition of CO2 to epoxides

Synergistic Catalysis of Ionic Liquid-Decorated Covalent Organic Frameworks with Polyoxometalates for CO 2 Cycloaddition Reaction under Mild Conditions

A novel pyrazolium ionic liquid used for CO2 cycloaddition

Functionalization of ionic liquids for heterogeneous catalysis in CO 2 conversion: cycloaddition of epoxides and hydrogenation

One-pot Synthesis of Cyclic Carbonates from Olefins and CO2 Catalyzed by Silica-Supported Imidazolium Hydrogen Carbonate Ionic Liquids

Porous bi-functional ionic liquid-grafted metal–organic framework for diluted CO 2 cycloaddition reaction

Hydroxyl-functionalized Ionic Liquid for Activation and Conversion of CO2 and Methanol into Dimethyl Carbonate

Hydroxyl and Amino Dual-Functionalized Core-Shell Molecular Sieves Featuring Hydrogen Bond Donor Groups for Efficient CO2 Cycloaddition.

Non-hydrolytic sol-gel synthesis of amine-functionalized silica: Template- and catalyst-free preparation of mesoporous catalysts for CO2 valorization

Controllable Homogeneity/Heterogeneity Switch of Imidazolium Ionic Liquids for CO2 Utilization

Hydroxyl and amino dual-functionalized core-shell molecular sieves featuring hydrogen bond donor groups for efficient CO 2 cycloaddition

The synthesis of amide bond by a simple one-step method to connect ionic liquid and MIL-101-NH 2 firmly for efficient CO 2 cycloaddition

Silicon Oxycarbide (SiOC)-Supported Ionic Liquids: Heterogeneous Catalysts for Cyclic Carbonate Formation

Cycloaddition of propylene oxide and carbon dioxide using CoMn2O4 nanoparticles supported onto dendritic fibrous nanosilica

Sterically regulated halogen‐free bifunctional ionic liquids for catalytic conversion of CO2 into cyclic carbonates