Abstract:The introduction of heterostructures is a new approach in gas sensing due to their easy and quick transport of charges. Herein, facile hydrothermal and solid-state techniques are employed to synthesize an α-Fe2O3/Nb2O5 heterostructure. The morphology, microstructure, crystallinity and surface composition of the synthesized heterostructures are investigated by scanning electron microscope, transmission electron microscope, x-ray diffraction, x-ray photoelectron spectroscopy and Brunauer–Emmett–Teller analyses. The successful fabrication of the heterostructures was achieved via the mutual incorporation of α-Fe2O3 nanorods with Nb2O5 interconnected nanoparticles (INPs). A sensor based on the α-Fe2O3(0.09)/Nb2O5 heterostructure with a high surface area exhibited enhanced gas-sensing features, maintaining high selectivity and sensitivity, and a considerable recovery percentage towards ethanol gas. The sensing response of the α-Fe2O3(0.09)/Nb2O5 heterostructure at lower operating temperature (160 °C) is around nine times higher than a pure Nb2O5 (INP) sensor at 180 °C with the flow of 100 ppm ethanol gas. The sensors also show excellent selectivity, good long-term stability and a rapid response/recovery time (8s/2s, respectively) to ethanol. The superior electronic conductivity and upgraded sensitivity performance of gas sensors based on the α-Fe2O3(0.09)/Nb2O5 heterostructure are attributed due to its unique structural features, high specific surface area and the synergic effect of the n–n heterojunction. The promising results demonstrate the potential application of the α-Fe2O3(0.09)/Nb2O5 heterostructure as a good sensing material for the fabrication of ethanol sensors.

Highly conjugated three-dimensional van der Waals heterostructure-based nanocomposite films for ultrahigh-responsive TEA gas sensors at room temperature

Reduced Graphene Oxide Wrapped Au@ZnO Core-Shell Structure for Highly Selective Triethylamine Gas Sensing Application at a Low Temperature

Nanocomposites of Carbon Nanotube (cnts)/cuo with High Sensitivity to Organic Volatiles at Room Temperature

Boosting Ethylene Glycol Sensing with Dendritic Hierarchical Cuo/Co3o4 Heterojunction Nanowire

Design of Highly Sensitive and Selective Ethanol Sensor Based on Α-Fe2o3/nb2o5 Heterostructure.

Highly Selective Triethylamine Gas Sensor Based on ZnO/Ti3C2Tx MXene Self-Assembly Heterostructure

Constructing bilayer sensors with Co-MOF-derived Co3O4 porous sensing films and SnO2 catalytic overlayers to enhance room-temperature triethylamine sensing performance

Core–shell SnO2/NiO p–n heterojunction composite for enhanced triethylamine gas sensitivity and selectivity

Ultrasensitive triethylamine gas sensors with ZnSe nanospheres/nest-like Cr-doped MoO3

Tin oxide/graphene composite fabricated via a hydrothermal method for gas sensors working at room temperature

Highly sensitive and selective triethylamine gas sensor based on hierarchical radial CeO2/ZnO n-n heterojunction

Room temperature triethylamine gas sensor with excellent performances based on novel porous CuO foam via a simple and facile route

Enhanced Triethylamine Sensing Performance of Α-Fe2o3 Nanoparticle/zno Nanorod Heterostructures

CuO@In 2 O 3 /ZnO Core–Shell Nanorods for Triethylamine Detection at Room Temperature

Heterogeneous Co3O4/Carbon Nanofibers for Low Temperature Triethylamine Detection: Mechanistic Insights by Operando DRIFTS and DFT

Highly sensitive and selective triethylamine sensor based on SnO2@ZnO nanocomposite synthesized apply high humidity atmosphere

Construction of hierarchical In2O3/In2S3 microsphere heterostructures for TEA detection

Flower-like SnS2/In2S3 heterostructures with available state density resonance effect for low-temperature gas-sensing performance to triethylamine

Tunable oxygen vacancies of cobalt oxides for efficient gas sensing application

High Sensitive Triethylamine Gas Sensor Based on C@WS2/WO3 Composite

Cobalt-doping-induced energy level and oxygen vacancy dual modulation in tin dioxide for efficient triethylamine detection