Abstract:The possibility of using geopolymer instead of Portland cement could effectively reduce carbon dioxide emissions from cement manufacturing. Fibre-reinforced self-compacting geopolymers have great potential in civil engineering applications, such as chord member grouting for concrete-filled steel tubular truss beams. However, to the best of the authors’ knowledge, the quantitative relationship between FF and the properties of the fibre-reinforced geopolymer has been rarely reported. In this research, 26 groups of mixtures were used to study the influence of the polypropylene fibre factor (FF) on the flowability and mechanical properties and also the compactness of the fibre-reinforced self-compacting geopolymer. At the same volume fraction, geopolymers with long fibres present worse flowability than those having short fibres due to the easier contacting of long fibres. By growing the FF the influence of fibre addition on the V-funnel flow rate is more significant than the slump spread. This can be ascribed to the consequence of fibre addition and friction by the V-funnel which estimates the restrained deformability. For FF lesser than critical factor Fc = 100, influence of fibres is negligible and fibres are far apart from each other and, thus, they cannot restrict cracking under load and transfer the load to improve the mechanical properties. For FF between the Fc = 100 and density factor Fd = 350, a noteworthy enhancement of mechanical properties was obtained and the geopolymer was still adequately workable to flow by weight of self, without any symbols of instability and fibre clumping. Under this condition, better fibre dispersal and reinforcing productivity can lead to better hardened properties. For FF higher than Fd = 350, fibres tend to come to be entwined together and form clumping resulting from the fibre balling, resulting in worse hardened properties. This research offers a sensible basis for the application of the workability regulator of the fresh properties of fibre-reinforced geopolymer as an operative way to basically obtain ideal mechanical properties.

Optimization of the fresh and hardened properties of cement grouting material for semiflexible pavement using polypropylene fiber

Effect of Fiber on Mechanical Properties of Cement Stabilized Macadam Mixture

Research on Properties of High-Performance Cement Mortar for Semiflexible Pavement

Experimental study on effects of polypropylene fiber on early-age shrinkage in concrete

Strength and Early Crack Resistance Experiment of Polypropylene Fiber Reinforced Concrete with Silicon Powder

Effect of Additives on the Rheological and Mechanical Properties of Microfine-Cement-Based Grout

Formulation and performance comparison of grouting materials for semi-flexible pavement

Performance Characteristics of Micro Fiber-Reinforced Ambient Cured One-Part Geopolymer Mortar for Repairing

Research on the Stressed Performance of Polypropylene Fibrous Concrete Ditch

A Study on the Mix Proportion of Fiber-Polymer Composite Reinforced Cement-Based Grouting Material

Research about the Effect of Polypropylene Fiber on Mechanical Properties of Curing Sludge

Preparation and Performance Improvement Mechanism Investigation of High-Performance Cementitious Grout Material for Semi-Flexible Pavement

Experimental Study on the Flexural Fatigue Performance of Slag/fly Ash Geopolymer Concrete Reinforced with Modified Basalt and PVA Hybrid Fibers

Active Polypropylene Fibers for Controlling Shrinkage Cracks in Cement-Stabilized Materials

Properties of Fiber-Reinforced Geopolymer Mortar Using Coal Gangue and Aeolian Sand

Experimental Study on the Mechanical Properties and Durability of High-Content Hybrid Fiber-Polymer Concrete

Influence of Polypropylene Fibre Factor on Flowability and Mechanical Properties of Self-Compacting Geopolymer

Experimental Investigation on the Mix Proportion of Fiber-Reinforced Ultrahigh-Strength Grouting Material

Efficient use of ceramic waste powder in Cementitious Grout for the Development of Sustainable Semi-Flexible Pavement Surfaces

Research on innovative preparation and performance of semi flexible pavement materials

Research on the Performance of Polymer Modified Cement Matrix Grouting Material Mixed with Polyvinyl Alcohol Fiber