Abstract:Corrosion protection of reinforcing steel in concrete is an urgent task in modern society. Use of corrosion inhibitors in concrete is an effective, simple, and economical method for protecting reinforcing steel from corrosion. Mixed corrosion inhibitors usually perform better than a single inhibitor in actual reinforced concrete systems because of their synergistic inhibition effects. In recent years, environmentally friendly corrosion inhibitors have attracted increasing attention from corrosion researchers. Diisooctyl sebacate and sodium D-gluconate are environmentally friendly organic corrosion inhibitors, and ZnSO4 is an inorganic cathodic inhibitor, they may form an innovative, nontoxic, and pollution-free mixed corrosion inhibitor to control reinforcing steel corrosion. Additionally, diisooctyl sebacate and sodium D-gluconate serve as absorption-type inhibitors, and ZnSO4 acts as a precipitation-type inhibitor. We hypothesized that their combination might show a good synergistic corrosion inhibition effect on reinforcing steel. In this study, we developed a diisooctyl sebacate-based mixed corrosion inhibitor that includes D-gluconate and ZnSO4 and investigated its synergistic inhibition effects on reinforcing steel (Q235 steel) corrosion in a simulated polluted concrete pore solution. The reinforcing steel corrosion behavior and the properties of the mixed corrosion inhibitor were studied by polarization curve measurements, electrochemical impedance spectroscopy tests, and surface analysis methods (scanning electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy). The results indicated that the reinforcing steel in the simulated polluted concrete pore solution (pH 11.00, 0.5 mol.L-1 NaCl) was in an active dissolving state and that localized corrosion took place. The mixed corrosion inhibitor, consisting of diisooctyl sebacate (59 mmol.L-1), sodium D-gluconate (0.5 mmol.L-1), and ZnSO4 (1.5 mmol.L(-)1), had an obvious and powerful inhibition effect. Its inhibition efficiency reached 96.8% and 90.0% in the simulated polluted concrete pore solution and the cement mortar, respectively. The mixture of diisooctyl sebacate with sodium D-gluconate and ZnSO4 acted as a mixed-type inhibitor and effectively controlled both anodic and cathodic reactions of the steel corrosion.

Study of the Electrochemical Behavior of Concrete‐Coated Steel in 1 M Sulfuric Acid Using an Extract of Diplotaxis simplex L.

Corrosion Inhibition and Adsorption Behavior of (3-Aminopropyl)-triethoxysilane on Steel Surface in the Simulated Concrete Pore Solution Contaminated with Chloride

Electrochemical and DFT studies of Terminalia bellerica fruit extract as an eco-friendly inhibitor for the corrosion of steel

A Combined Experimental and Computational (DFT, RDF, MC and MD) Investigation of Epoxy Resin as a Potential Corrosion Inhibitor for Mild Steel in a 0.5 M H2SO4 Environment

Effect of Diamino ( ( 2-( ( 2-Aminoethyl ) Amino ) Ethyl ) Amino ) Methanethiol on the Corrosion Resistance of Carbon Steel in Simulated Concrete Pore Solutions

Chemical, electrochemical, and surface studies of Rosa damascene extract as a green corrosion inhibitor for carbon steel in sulfuric acid environment

Davidian involucrata Leaves Extract as Green Corrosion Inhibitor for low carbon Steel in concrete pore solution containing chloride ions

Enhanced corrosion resistance of carbon steel in an aggressive environment by a recently developed pyrazole derivative: Electrochemical, SEM/XPS/AFM, and theoretical investigation

Optimization of the inhibition corrosion of carbon steel in an acidic medium by a novel eco-friendly inhibitor Asphodelus ramosus using response surface methodology

Experimental and theoretical insights into Artemisia Stems aqueous extract as a sustainable and eco–friendly corrosion inhibitor for mild steel in 1 M HCl environment

Effect of Sodium D-Gluconate-Based Inhibitor in Preventing Corrosion of Reinforcing Steel in Simulated Concrete Pore Solutions

Corrosion Behaviors of Tetrasodium Iminodisuccinate (IDS) as an Environmentally Friendly Inhibitor: Experimental and Theoretical Studies

Development of Green and Sustainable Corrosion Inhibitor for Steel Rebar in Chloride-Polluted Simulated Concrete Pore Solution Using Seed Extract of Psoralea Corylifolia (badranj Boya)

Theoretical, Chemical, and Electrochemical Studies of Equisetum Arvense Extract As an Impactful Inhibitor of Steel Corrosion in 2 M HCl Electrolyte.

Evaluation of anti-corrosion potential of Datura Metel plant extract on mild steel upon sulphuric acid exposure

Synergistic inhibition of benzotriazole and sodium D-gluconate on steel corrosion in simulated concrete pore solution

Effect of an Environmentally Friendly Diisooctyl Sebacate-based Mixed Corrosion Inhibitor on Reinforcing Steel

An eco-friendly corrosion inhibitor for steel used in desalination systems during acid cleaning: Irish ivy extract

Synthesis and Anticorrosive Properties of Epoxy Polymer for CS in [1 M] HCl Solution: Electrochemical, AFM, DFT and MD Simulations

Potential Application of Ginkgo Biloba Extract As a Green Corrosion Inhibitor for Carbon Steel Reinforcement in Chloride-Polluted Simulated Concrete Pore Solution