Abstract:A critical component of long term geological sequestration of anthropogenic CO2 will be our ability to adequately monitor a chosen site to ensure public and environmental safety. Near surface monitoring is particularly important, as it is possible to conduct sensitive and direct measurements at the boundary between the subsurface and the biosphere (i.e. surface water or atmosphere). While discontinuous surface monitoring is often performed, continuous monitoring is preferable if one hopes to observe a leak in its early stages to allow for rapid remedial action. The geochemical signal that may result from a near-surface CO2 leak might take the form of increased soil gas concentrations (on land) or changing pH, Eh, and aqueous chemistry (in groundwater or surface water), and thus continuous monitoring stations capable of analyzing for these parameters have great potential for early leak detection. In the framework of the EC-funded CO2GeoNet and CO2ReMoVe projects innovative monitoring systems have been designed and constructed for autonomous deployment in marine environments above geological CO2 storage sites. The system developed within CO2GeoNet was tested at a site in the Gulf of Trieste where there is no gas release; this site was chosen due to easy access and the presence of an existing oceanographic buoy onto which the monitoring station was mounted. Tests on this early prototype highlighted the various difficulties of working in marine environments, and this experience formed the basis for a new system developed for deployment at the Panarea test site within CO2ReMoVe. This second site is located off the coast of Panarea Island, to the north of Sicily, where naturally-produced CO2 leaks from the seabed into the water column. The advantage of this site is that the leaks occur in a relatively near-shore environment (<300 m) and in water that is not too deep (<25 m), thereby allowing for easy access by SCUBA divers for system testing and maintenance. This location allowed the unit to be connected via cable, rather than a buoy, which makes power supply and data transfer simpler. The system developed for this site consists of three monitoring points that are connected to a land-based control unit. Each point, located 100, 200, and 300 m from shore in different CO2 flux regimes, is able to measure dissolved CO2 and CH4, conductivity, pH, and temperature using low cost but sensitive sensors. The complete system consists of flexible solar panels, a central control unit and three monitoring points, and data download is conducted using a GPRS connection and a web server. Difficulties with the initial deployment in early April of 2008 has necessitated further development work, with the second deployment planned for early November. The following paper discussed the experience gained with these stations, and presents data analysis and anomaly recognition from a land-based monitoring station that has been collecting dissolved CO2 data for over 18 months.

Signal propagation from portable active seismic source (PASS) to km‐scale borehole DAS for continuous monitoring of CO2 storage site

Continuous monitoring system for safe managements of CO2 storage and geothermal reservoirs

Integrated Amphibious Distributed Acoustic Sensing for Seismic Monitoring in the Xinfengjiang Reservoir

Development of detection and monitoring techniques of CO2 leakage from seafloor in sub-seabed CO2 storage

Multiwell Fiber Optic Sensing Reveals Effects of CO2 Flow on Triggered Seismicity

Downhole distributed acoustic sensing provides insights into the structure of short‐period ocean‐generated seismic wavefield

Strategies for Detection and Monitoring of CO2 Leakage in Sub-seabed CCS

Downhole Surveillance During the Well Lifetime Using Distributed Temperature Sensing

Performance of Seismic Observation by Distributed Acoustic Sensing Technology Using a Seafloor Cable Off Sanriku, Japan

Seismic Monitoring of a Deep Geothermal Field in Munich (Germany) Using Borehole Distributed Acoustic Sensing

Monitoring Injected CO2 Using Earthquake Waves Measured by Downhole Fibre-Optic Sensors: CO2CRC Otway Stage 3 Case Study

Integration of distributed acoustic sensing for real-time seismic monitoring of a geothermal field

Distributed Optical Fiber Acoustic Sensor for in Situ Monitoring of Marine Natural Gas Hydrates Production for the First Time in the Shenhu Area, China

Feasibility of targeted active seismic monitoring of geological carbon storage using refracted waves

Multi-Sensor Seismic Processing Approach using Geophones and HWC DAS in the Monitoring of CO2 Storage at the Hellisheiði Geothermal Field in Iceland

Seismic detection of CO2 leakage along monitoring wellbores

Development of an innovative marine monitoring system for CO2 leaks: system design and testing

A field laboratory for monitoring CO2 leakage

Continuous monitoring of the depth of the water-mud interface using distributed acoustic sensing

Low-Frequency Distributed Acoustic Sensing for Early Gas Detection in a Wellbore

Active Reservoir Pressure Management with Guidance and Surveillance by Distributed Fiber-optic Strain Sensing