Abstract:Zoom lens has been widely applied in all kinds of fields, and its cam optimization is the key to actualizing the performance of its optical design and the zooming process, while the smoothness and speediness of zooming movement must be considered for military and civilian use. With the incremental use of environmental requirements, it puts forward higher requests to the cam performance of lens. In order to guarantee that the cam has good stiffness in the case of vibration and shock environment, in the process of cam design, it not only requires curve optimal, but also needs to consider influence on the performance which is caused by reduced cam stiffness of the zoom system. A fine curve can ensure that the cam pressure angle α is smaller, and to ensure the cam follower maintains the uniform velocity and smaller acceleration in zooming process, and make the zoom system produce little impact, and whole zooming process smooth and fluent, it can reduce the zoom systems driving moment M, and can ensure the stability imaging of the zoom system. Good cam stiffness K can make the zoom lens have good stability in vibration environment, and make sure that the image quality. M and K respectively up to the pressure angle α of zoom curve and the rotation angle θ of zoom curve in cam. In the new cam design process, considering the whole influence on the performance that is caused by K and M to cam, we construct the function expressions K = f (α, θ) and M = f (α, θ), and then, build target optimization function with K and M, optimize the relationship between pressure angle α of zoom curve and rotation angle θ, looking for the optimal value for the stiffness K and the cam system driving moment M , and improve overall performance of the zoom cam .

Study on pressure angle optimization for cam curve of continuous zoom system based on the particle swarm optimization

Optimization design method of cam curve for zoom lens

Target Optimization Design of Cam Curve in Zoom System

Design of a Compact Varifocal Panoramic System Based on the Mechanical Zoom Method.

Automated first-order design of double-sided telecentric zoom systems based on PSO algorithms

Optimization Design Of Zoom Lens Systems

Automated Design of Machine Vision Lens Based on the Combination of Particle Swarm Optimization and Damped Least Squares

Mathematical Modeling and Implementation of a Panoramic Zoom System Without Central Blind Area

Research on Cam Curve Structure for Infrared Zoom Optical System

Deformation Pre-Compensated Optimization Design of Cam Ring for Low Pulsation Hydraulic Motors

Shaping the Wavefront of Incident Light with a Strong Robustness Particle Swarm Optimization Algorithm

A New Solution for Pressure Angles of Spatial Cam Mechanisms

Enlarging dynamic and momentum aperture by particle swarm optimization

Optimization and Modeling of a Spatial CAM Mechanism for a Two-Dimensional Plunger Electro-Hydraulic Pump

Zoom lens with high zoom ratio design based on Gaussian bracket and particle swarm optimization

Parameter Optimization of Large-Size High-Speed Cam-Linkage Mechanism for Kinematic Performance

Synthetic System Design Method for Off-Axis Stabilized Zoom Systems with a High Zoom Ratio.

A Particle Swarm Optimization Approach For Pid Parameters In Hydraulic Servo Control System

Precision Motion Control of Constrained SISO Nonlinear System Via Direct Optimized Compensation

A high-precision institutional design and mechanical performance analysis of the medium-wave infrared continuous zoom

Particle Swarm Optimisation Algorithm for Non-Linear Camera Calibration